SAE AS 85049 6B-2011 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING 45 SHIELD TERMINATION CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS81703 SERI.pdf

《SAE AS 85049 6B-2011 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING 45 SHIELD TERMINATION CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS81703 SERI.pdf》由会员分享，可在线阅读，更多相关《SAE AS 85049 6B-2011 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING 45 SHIELD TERMINATION CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS81703 SERI.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、AEROSPACE STANDARD CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)AS85049/6Copyright 2011 SAE International All rights reserved. No p

2、art of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +

3、1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2001-07REVISED 2011-01THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.BFEDERAL SUPPLY CLASS 5935 AS85049/6SHEET 1 OF 9REV. BPROCUREMENT SPECIFICATION: AS85049SAE Technical Standar

4、ds Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofth

5、e user.”SAE reviews eachtechnicalreport at least every five years at which time itmay bereaffirmed, revised, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS85049/6BR

6、ATIONALE THIS REVISION IS REQUIRED TO INCORPORATE THE OUTSTANDING AMENDMENT AND UPDATE TO MEET SAE FORMAT GUIDELINES. NOTICE THE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION SHEET AND THE LATEST ISSUE OF SAE AS85049. FIGURE 1 - CONFIGURATION AND DIMENSI

7、ONS Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS85049/6SHEET 2 OF 9REV. BCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45, SHIELD TERMINATION, C

8、ATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)FIGURE 1 - CONFIGURATION AND DIMENSIONS (CONTINUED) TABLE 1 - DIMENSIONS 1 4 .125 (3.18) .250 (6.35) 1 1.790 (45.47) 1.544 (39.22)2 6 .250 (6.35) .437 (11.10) 2 1.910 (48.51) 1.544 (39.22

9、)3 8 8S 8 4 .125 (3.18) .250 (6.35) 1 1.182 (30.02) 1.544 (39.22)4 4 .125 (3.18) .312 (7.92) 1 1.850 (46.99) 1.544 (39.22)5 6 .250 (6.35) .375 (9.53) 1 1.245 (31.62) 1.544 (39.22)6 4 .125 (3.18) .312 (7.92) 1 1.910 (48.51) 1.544 (39.22)7 6 .250 (6.35) .437 (11.10) 1 1.910 (48.51) 1.544 (39.22)8 10 .

10、350 (8.89) .500 (12.70) 1 1.910 (48.51) 1.844 (46.84)9 6 .250 (6.35) .437 (11.10) 1 2.000 (50.80) 1.544 (39.22)10 10 .350 (8.89) .575 (14.61) 1 1.655 (42.04) 1.844 (46.84)11 6 .250 (6.35) .437 (11.10) 1 2.110 (53.59) 1.544 (39.22)12 12 .500 (12.70) .700 (17.78) 1 1.750 (44.45) 1.916 (48.67)13 10 .35

11、0 (8.89) .625 (15.88) 1 2.300 (58.42) 1.844 (46.84)14 16 .625 (15.88) .779 (19.79) 1 1.938 (49.23) 2.000 (50.80)15 10 .350 (8.89) .625 (15.88) 1 2.300 (58.42) 1.844 (46.84)16 16 .625 (15.88) .904 (22.96) 1 1.938 (49.23) 2.000 (50.80)202737 20 20141618 18 181912 12, 12S1416, 16S1614,14S12DASH NOAS817

12、03 SERIES 3MIL-DTL-26482 SERIES 2AS50151 CrimpCONNECTOR SHELL SIZEMIL-DTL-83723 Series IIIMIN71C RefB .125Clamp SizeStyleA (See note 6)WIRE BUNDLE ACCOMMODATION RANGEMAX3N/A10 10S, 10SL 10N/AN/A N/ACopyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or net

13、working permitted without license from IHS-,-,-AEROSPACE STANDARD AS85049/6SHEET 3 OF 9REV. BCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONN

14、ECTORS)TABLE 1 - DIMENSIONS (CONTINUED) TABLE 1 - DIMENSIONS (CONTINUED) DASHNO. CONNECTOR SHELL SIZE CLAMPSIZEA (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES3MIL-DTL-26482 SERIES2AS50151 CRIMP MIL-DTL-83723 SERIESIIIWIRE BUNDLE ACCOMMODATION RANGE MIN MAX 17N/A22 22 22 12 .500 (12.70) .750 (19.05)

15、 1 2.450 (62.23) 1.916 (48.67) 18 20 .875 (22.23) 1.029 (26.14) 1 2.093 (53.16) 2.230 (56.64) 1924 24 24 12 .500 (12.70) .750 (19.05) 1 2.450 (62.23) 1.916 (48.67) 20 20 .875 (22.23) 1.144 (29.06) 1 2.093 (53.16) 2.230 (56.64) 21N/A28N/A16 .625 (15.88) .937 (23.80) 1 2.500 (63.50) 2.000 (50.80) 22 2

16、4 1.000 (25.40) 1.375 (34.93) 1 2.156 (54.76) 2.024 (51.41) 233216 .625 (15.88) .937 (23.80) 1 2.600 (66.04) 2.000 (50.80) 24 20 .875 (22.23) 1.250 (31.75) 1 2.600 (66.04) 2.230 (56.64) 25 28 1.250 (31.75) 1.625 (41.28) 1 2.250 (57.15) 2.550 (64.77) 263616 .625 (15.88) .937 (23.80) 1 2.690 (68.33) 2

17、.000 (50.80) 27 24 1.000 (25.40) 1.375 (34.93) 1 2.690 (68.33) 2.024 (51.41) 28 32 1.437 (36.50) 1.840 (46.74) 1 2.344 (59.54) 2.600 (66.04) 294016 .625 (15.88) .937 (23.80) 1 2.690 (68.33) 2.000 (50.80) 30 24 1.000 (25.40) 1.375 (34.93) 1 2.690 (68.33) 2.024 (51.41) 31 32 1.437 (36.50) 1.875 (47.63

18、) 1 2.344 (59.54) 2.600 (66.04) DASHNO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 1 .669 (16.99) .561 (14.25) .625-24 UNEF 3.37 ( 85.60) 3.74 ( 95.00) 2 .669 (16.99) 1.375 (34.93) .750-20 UNEF 4.33 (109.98) .858 (21.79) 4.70 (119.38) 3 .617 (15.67) .500 (12.70) .625-24 UNEF 2.88 ( 73.

19、15) 3.25 ( 82.55) 4 .734 (18.64) .561 (14.25) .625-24 UNEF 3.41 ( 86.61) 3.78 ( 96.01) 5 .734 (18.64) .561 (14.25) .750-20 UNEF 3.05 ( 77.47) 3.42 ( 86.87) 6 .858 (21.79) .625 (15.88) .625-24 UNEF 3.52 ( 89.41) 3.89 ( 98.81) 7 .858 (21.79) .625 (15.88) .750-20 UNEF 3.58 ( 90.93) 3.95 (100.33) 8 .858

20、 (21.79) .625 (15.88) 1.000-20 UNEF 3.86 ( 98.04) 4.23 (107.44) 9 .984 (24.99) .688 (17.48) .750-20 UNEF 3.71 ( 94.23) 4.08 (103.63) 10 .984 (24.99) .688 (17.48) 1.000-20 UNEF 3.74 ( 95.00) 4.11 (104.39) 11 1.112 (28.24) .781 (19.84) .750-20 UNEF 3.88 ( 98.55) 4.25 (107.95) 12 1.112 (28.24) .781 (19

21、.84) 1.1875-18 UNEF 4.03 (102.36) 4.40 (111.76) 13 1.218 (30.94) .968 (24.59) 1.000-20 UNEF 4.48 (113.79) 4.85 (123.19) 14 1.218 (30.94) .968 (24.59) 1.4375-18 UNEF 4.49 (114.05) 4.86 (123.44) 15 1.345 (34.16) .968 (24.59) 1.000-20 UNEF 4.48 (113.79) 4.85 (123.19) 16 1.345 (34.16) .968 (24.59) 1.437

22、5-18 UNEF 4.49 (114.05) 4.86 (123.44) Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS85049/6SHEET 4 OF 9REV. BCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE

23、SEALING, 45, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)TABLE 1 - DIMENSIONS (CONTINUED) DASHNO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 17 1.468 (37.29) 1.063 (27.00) 1.1875-18 UNEF 4.81 (122

24、.17) 5.18 (131.57) 18 1.468 (37.29) 1.063 (27.00) 1.750-18 UNS 4.98 (126.49) 5.35 (135.89) 19 1.593 (40.46) 1.063 (27.00) 1.1875-18 UNEF 4.81 (122.17) 5.18 (131.57) 20 1.593 (40.46) 1.063 (27.00) 1.750-18 UNS 4.98 (126.49) 5.35 (135.89) 21 1.969 (50.01) 1.188 (30.18) 1.4375-18 UNEF 5.11 (129.79) 5.6

25、4 (143.26) 22 1.969 (50.01) 1.188 (30.18) 2.000-18 UNS 5.09 (129.29) 5.62 (142.75) 23 2.219 (56.36) 1.250 (31.75) 1.4375-18 UNEF 5.24 (133.10) 5.77 (146.56) 24 2.219 (56.36) 1.250 (31.75) 1.750-18 UNS 5.52 (140.21) 6.05 (153.67) 25 2.219 (56.36) 1.250 (31.75) 2.250-16 UN 5.73 (145.54) 6.26 (159.00)

26、26 2.469 (62.71) 1.281 (32.54) 1.4375-18 UNEF 5.33 (135.38) 5.86 (148.84) 27 2.469 (62.71) 1.281 (32.54) 2.000-18 UNS 5.56 (141.22) 6.09 (154.69) 28 2.469 (62.71) 1.281 (32.54) 2.500-16 UN 5.95 (151.13) 6.48 (164.59) 29 2.719 (69.06) 2.031 (51.59) 1.4375-18 UNEF 6.08 (154.43) 6.61 (167.89) 30 2.719

27、(69.06) 2.031 (51.59) 2.000-18 UNS 6.31 (160.27) 6.84 (173.74) 31 2.719 (69.06) 2.031 (51.59) 2.500-16 UN 6.70 (170.18) 7.23 (183.64) TABLE 1 - DIMENSIONS (CONTINUED) DASHNO. CONNECTOR SHELL SIZE CLAMPSIZEA (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES3MIL-DTL-26482 SERIES2AS50151 CRIMP MIL-DTL-837

28、23 SERIESIIIWIRE BUNDLE ACCOMMODATION RANGE MIN MAX 32N/AN/A44N/A16 .625 (15.88) .937 (23.80) 1 2.690 (68.33) 2.000 (50.80) 33 24 1.000 (25.40) 1.375 (34.93) 1 2.690 (68.33) 2.024 (51.41) 34 32 1.437 (36.50) 1.875 (47.63) 1 2.344 (59.54) 2.600 (66.04) 354816 .625 (15.88) .937 (23.80) 1 2.690 (68.33)

29、 2.000 (50.80) 36 24 1.000 (25.40) 1.375 (34.93) 1 2.690 (68.33) 2.024 (51.41) 37 32 1.437 (36.50) 1.875 (47.63) 1 2.344 (59.54) 2.600 (66.04) 3861 N/A 12 .500 (12.70) .750 (19.05) 1 2.450 (62.23) 1.916 (48.67) 39 20 .875 (22.23) 1.184 (30.07) 1 2.093 (53.16) 2.230 (56.64) 40 19 16 16, 16S 16 10 .35

30、0 ( 8.89) .625 (15.88) 1 2.110 (53.59) 1.844 (46.84) 4127 18 18 18 4 .125 ( 3.18) .312 ( 7.92) 1 2.300 (58.42) 1.544 (39.22) 42 6 .250 ( 6.35) .437 (11.10) 1 2.300 (58.42) 1.544 (39.22) 43 37 20 20 20 6 .250 ( 6.35) .437 (11.10) 1 2.300 (58.42) 1.544 (39.22) 44N/A22 22 22 4 .125 ( 3.18) .312 ( 7.92)

31、 1 2.450 (62.23) 1.544 (39.22) 45 6 .250 ( 6.35) .437 (11.10) 1 2.450 (62.23) 1.544 (39.22) 46 24 24 24 10 .350 ( 8.89) .625 (15.88) 1 2.450 (62.23) 1.844 (46.84) Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license f

32、rom IHS-,-,-AEROSPACE STANDARD AS85049/6SHEET 5 OF 9REV. BCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)TABLE 1 - DIMENSIONS (CONTIN

33、UED) DASHNO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 32 2.969 (75.41) 2.031 (51.59) 1.437-18 UNEF 6.08 (154.43) 6.61 (167.89) 33 2.969 (75.41) 2.031 (51.59) 2.000-18 UNS 6.31 (160.27) 6.84 (173.74) 34 2.969 (75.41) 2.031 (51.59) 2.500-16 UN 6.70 (170.18) 7.23 (183.64) 35 3.219 (81.7

34、6) 2.031 (51.59) 1.437-18 UNEF 6.08 (154.43) 6.61 (167.89) 36 3.219 (81.76) 2.031 (51.59) 2.000-18 UNS 6.31 (160.27) 6.84 (173.74) 37 3.219 (81.76) 2.031 (51.59) 2.500-16 UN 6.70 (170.18) 7.23 (183.64) 38 1.653 (41.99) 1.063 (27.00) 1.1875-18 UNEF 4.81 (122.17) 5.18 (131.57) 39 1.653 (41.99) 1.063 (

35、27.00) 1.750-18 UNS 4.98 (126.49) 5.35 (135.89) 40 1.112 (28.24) .781 (19.84) 1.000-20 UNEF 4.16 (105.66) 4.53 (115.06) 41 1.218 (30.94) .968 (24.59) .625-24 UNEF 4.13 (104.90) 4.50 (114.30) 42 1.218 (30.94) .968 (24.59) .750-20 UNEF 4.20 (106.68) 4.57 (116.08) 43 1.345 (34.16) .968 (24.59) .750-20

36、UNEF 4.20 (106.68) 4.57 (116.08) 44 1.468 (37.29) 1.063 (27.00) .625-24 UNEF 4.34 (110.24) 4.71 (119.63) 45 1.468 (37.29) 1.063 (27.00) .750-20 UNEF 4.40 (111.76) 4.77 (121.16) 46 1.593 (40.46) 1.063 (27.00) 1.000-20 UNEF 4.68 (118.87) 5.05 (128.27) TABLE 1 - DIMENSIONS (CONTINUED) DASHNO. CONNECTOR

37、 SHELL SIZE CLAMPSIZEA (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES3MIL-DTL-26482 SERIES2AS50151 CRIMP MIL-DTL-83723 SERIESIIIWIRE BUNDLE ACCOMMODATION RANGE MIN MAX 47N/AN/A36N/A12 .500 (12.70) .750 (19.05) 1 2.690 (68.33) 1.916 (48.67) 48 40 12 .500 (12.70) .750 (19.05) 1 2.690 (68.33) 1.916 (48

38、.67) 49 10 10S,10SL10 6 .250 ( 6.35) .437 (11.10) 2 1.910 (48.51) 1.544 (39.22) 50 12 14 14, 14S 14 12 .500 (12.70) .750 (19.05) 2 2.300 (58.42) 1.916 (48.67) 51 19 16 16, 16S 16 16 .625 (15.88) .937 (23.80) 2 2.450 (62.23) 2.000 (50.80) 52 27 18 18 18 12 .500 (12.70) .750 (19.05) 1 2.300 (58.42) 1.

39、916 (48.67) 53 61 N/A N/A N/A 16 .625 (15.88) .937 (23.80) 1 2.450 (62.23) 2.000 (50.80) 5437 20 20 20 12 .500 (12.70) .750 (19.05) 1 2.300 (58.42) 1.916 (48.67) 55 20 .875 (22.23) 1.250 (31.75) 2 2.500 (63.50) 2.230 (56.64) 56N/A22 22 22 10 .350 ( 8.89) .625 (15.88) 1 2.450 (62.23) 1.844 (46.84) 57

40、 16 .625 (15.88) .937 (23.80) 1 2.450 (62.23) 2.000 (50.80) 58 20 .875 (22.23) 1.250 (31.75) 2 2.500 (63.50) 2.230 (56.64) 59 24 24 24 16 .625 (15.88) .937 (23.80) 1 2.450 (62.23) 2.000 (50.80) 60 N/A 28 N/A 12 .500 (12.70) .750 (19.05) 1 2.500 (63.50) 1.916 (48.67) Copyright SAE International Provi

41、ded by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS85049/6SHEET 6 OF 9REV. BCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DT

42、L-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)TABLE 1 - DIMENSIONS (CONTINUED) DASHNO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 47 2.469 (62.71) 1.281 (32.54) 1.1875-18 UNEF 5.20 (132.08) 5.73 (145.54) 48 2.719 (69.06) 2.031 (51.59) 1.1875-18 UNEF 5.95 (

43、151.13) 6.48 (164.59) 49 .734 (18.64) 1.375 (34.93) .750-20 UNEF 4.33 (109.98) .858 (21.79) 4.70 (119.38) 50 .984 (24.99) 1.717 (43.61) 1.1875-18 UNEF 5.36 (136.14) 1.218 (30.94) 5.73 (145.54) 51 1.112 (28.24) 1.812 (46.02) 1.4375-18 UNEF 5.70 (144.78) 1.468 (37.29) 6.07 (154.18) 52 1.218 (30.94) .9

44、68 (24.59) 1.1875-18 UNEF 4.61 (117.09) 4.98 (126.49) 53 1.653 (41.99) 1.063 (27.00) 1.4375-18 UNEF 4.95 (125.73) 5.32 (135.13) 54 1.345 (34.16) .968 (24.59) 1.1875-18 UNEF 4.61 (117.09) 4.98 (126.49) 55 1.345 (34.16) 1.963 (49.86) 1.750-18 UNS 6.14 (155.96) 1.969 (50.01) 6.51 (165.35) 56 1.468 (37.

45、29) 1.063 (27.00) 1.000-20 UNEF 4.68 (118.87) 5.05 (128.27) 57 1.468 (37.29) 1.063 (27.00) 1.4375-18 UNEF 4.95 (125.73) 5.32 (135.13) 58 1.468 (37.29) 1.936 (49.17) 1.750-18 UNS 6.14 (155.96) 1.969 (50.01) 6.51 (165.35) 59 1.593 (40.46) 1.063 (27.00) 1.4375-18 UNEF 4.95 (125.73) 5.32 (135.13) 60 1.9

46、69 (50.01) 1.188 (30.18) 1.1875-18 UNEF 4.97 (126.24) 5.50 (139.70) TABLE 1 - DIMENSIONS (CONTINUED) DASHNO. CONNECTOR SHELL SIZE CLAMPSIZEA (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES3MIL-DTL-26482 SERIES2AS50151 CRIMP MIL-DTL-83723 SERIESIIIWIRE BUNDLE ACCOMMODATION RANGE MIN MAX 61N/A N/A 28N/

47、A20 .875 (22.23) 1.250 (31.75) 1 2.500 (63.50) 2.230 (56.64) 62 32 24 1.000 (25.40) 1.375 (34.93) 1 2.600 (66.04) 2.024 (51.41) 633620 .875 (22.23) 1.250 (31.75) 1 2.690 (68.33) 2.230 (56.64) 64 28 1.250 (31.75) 1.625 (41.28) 1 2.690 (68.33) 2.550 (64.77) 654020 .875 (22.23) 1.250 (31.75) 1 2.690 (6

48、8.33) 2.230 (56.64) 66 28 1.250 (31.75) 1.625 (41.28) 1 2.690 (68.33) 2.550 (64.77) 674420 .875 (22.23) 1.250 (31.75) 1 2.690 (68.33) 2.230 (56.64) 68 28 1.250 (31.75) 1.625 (41.28) 1 2.690 (68.33) 2.550 (64.77) 694820 .875 (22.23) 1.250 (31.75) 1 2.690 (68.33) 2.230 (56.64) 70 28 1.250 (31.75) 1.625 (41.28) 1 2.690 (68.33) 2.550 (64.77) 71 7 12 12, 12S 12 10 .350 ( 8.89) .625 (15.88) 2 2.110 (53.59) 1.844 (46.84) 72 27 18 18 18 16 .625 (15.88) .937 (23.80) 2 2.450 (62.23) 2.000 (50.80) 73 N/A 24 24 24 20 .875 (22.23) 1.250 (31.75) 2 2