NEMA C136 1-2004 For Roadway and Area Lighting Equipment C Filament Lamps C A Guide for Selection《道路和地区照明设备 白热丝灯 选择指南》.pdf

《NEMA C136 1-2004 For Roadway and Area Lighting Equipment C Filament Lamps C A Guide for Selection《道路和地区照明设备 白热丝灯 选择指南》.pdf》由会员分享，可在线阅读，更多相关《NEMA C136 1-2004 For Roadway and Area Lighting Equipment C Filament Lamps C A Guide for Selection《道路和地区照明设备 白热丝灯 选择指南》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、 ANSI C136.1-2012 American National Standard For Roadway and Area Lighting Equipment Filament Lamps A Guide for Selection Copyright 2012 by National Electrical Manufacturers Association ANSI C136.1-2012 Revision of ANSI C136.1-2004 (R2009) American National Standard For Roadway and Area Lighting Equ

2、ipment Filament LampsA Guide for Selection Secretariat: National Electrical Manufacturers Association Approved August 27, 2012 Published August 30, 2012 American National Standards Institute, Inc. ANSI C136.1-2012 Page ii Copyright 2012 by National Electrical Manufacturers Association NOTICE AND DIS

3、CLAIMER The information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the

4、 development of this document. American National Standards Institute (ANSI) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the vie

5、ws of persons who have an interest in the topic covered by this publication. While NEMA administers the process and establishes rules to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completene

6、ss of any information or the soundness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resu

7、lting from the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will

8、fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional

9、or other services for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in deter

10、mining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power,

11、nor does it undertake to police or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safetyrelated information in this

12、 document shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the statement. ANSI C136.1-2012 Page iii Copyright 2012 by National Electrical Manufacturers Association Published by: National Electrical Manufacturers Association 1300 North 17th Street, Rossl

13、yn, VA 22209 g164 Copyright 2012 by National Electrical Manufacturers Association. All rights reserved including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan

14、American Copyright Conventions. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, and without the prior written permission of the publisher. Printed in the United States of America. AMERICAN NATIONAL STANDARD Approval of an American National S

15、tandard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly a

16、nd materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is comple

17、tely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop st

18、andards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations shou

19、ld be addressed to the secretariat or sponsor whose name appears on the title page of this standard. This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or

20、withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. ANSI C136.1-2012 Page iv Copyright 2012 by National Electrical Manufacturers Association ANSI C136.1-2012 Page v Copyrig

21、ht 2012 by National Electrical Manufacturers Association TABLE OF CONTENTS Forward vi 1 SCOPE 1 2 INFORMATIVE REFERENCES 1 3 GENERAL . 1 ANSI C136.1-2012 Page vi Copyright 2012 by National Electrical Manufacturers Association FOREWORD At the time this standard was approved, the ANSI C136 Committee w

22、as composed of the following members: Acuity Brands Lighting Alabama Power American Electric Lighting City of Kansas City, Missouri City of Los Angeles, Bureau of Street Lighting Cooper Lighting Duke Energy Edison Electric Institute EPRI Florida Power and Light FRE Composites Inc. GE Lighting Georgi

23、a Power Company Gulf Power Company Hapco Aluminum Pole Products Holophane An Acuity Brands Company Hubbell Lighting, Inc. Intelligent Illuminations Inc. Kauffman Consulting, LLC LITES National Grid Pacific Northwest National Laboratory Philips HADCO Philips LUMEC Progress Energy Puget Sound Energy S

24、hakespeare Composite Structures South Carolina Electric ” ANY means “base any position.” TABLE 2 MULTIPLE LAMPS* Rated Initial Lumens Rated Watts Clear Lamp Screw Base Brass Light Center Length mm (in.) 3000 Hours 6000 Hours 1,000 92 103 A-23 Medium 113 (4-7/16) 2,500 189 202 PS-25 Medium 133 (5-1/4) 4,000 295 327 PS-35 Mogul 178 (7) 6,000 405 448 PS-40 Mogul 178 (7) 10,000 - 690 PS-40 Mogul 178 (7) *Voltage ratings: 120, 125, and 130 Volts. Burning position: ANY.