NAVY MIL-STD-1322-94-1989 UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT PACK PARACHUTE UMN MK 35 OR PACK PARACHUTE SUBASSEMBLY FOR MINE MK 52 CONTAINER SHIPPING DL 5990531《配给MK 52型水.pdf

《NAVY MIL-STD-1322-94-1989 UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT PACK PARACHUTE UMN MK 35 OR PACK PARACHUTE SUBASSEMBLY FOR MINE MK 52 CONTAINER SHIPPING DL 5990531《配给MK 52型水.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-STD-1322-94-1989 UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT PACK PARACHUTE UMN MK 35 OR PACK PARACHUTE SUBASSEMBLY FOR MINE MK 52 CONTAINER SHIPPING DL 5990531《配给MK 52型水.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-STD-1322 -94 1 9979911 007LL4L 4 s-37-03 MILlTARY STANDARD MIL-STD-1322-94 UNIT LOAD CNAWI 13 APRIL 1989 FOR DOMESTIC AND OVERSEAS SHIPMENT PACK. PARACHUTE, UMN. MK 35 OR PACK PARACHUTE, SUBASSEMBLY FOR MINE MK 52 IN CONTAINER, SHIPPING. DL 5990531 LW 94 O I 8 0 8 98 6 UNIT LOAD DATA DODWNALC NO

2、. NUMBER OF PARACHUTE PACKS PER CONTAINER . NUMBER OF SUBASSEMBLIES PER CONTAINER . NUMBER OF CONTAINERS PER UNIT LOAD, . NUMBER OF PARACHUTE PACKS PER UNIT LOAD . NUMBER OF SUBASSEMBLIES PER UNIT LOAD. GROSS WEIGHT OF ONE CONTAINER LBS WEIGHT OF STEEL STRAPPING LBC YIEIGHT OF WOOD BATTENS 8 LBS WEI

3、GHT OF PALLET 90 LBS GROSS WEIGHT OF UNIT LOAD. . 888 LBS A CUBE 79.2 CU FT A DO NOT USE FOR SHIPPING WEIGHT DO NOT 4 UNIT STACK LOADS MORE THAN R 495 I O 8 8 O 86 LBS 6 LBS 8 LBS 90 LBS 792 LBS A 79.2 CU FT SHIPPING (PACKING1 CONDITION DRAWING 53711-5990531 NOTES: AMSC NO. - N/A DISTRIBUTION STATEM

4、ENT A APPROVED FOR PUBLIC RELEASE: DISTRIBUTION IS UNLIMITED. I. 2. UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. FOR CROSS REFERENCE TO ASSOCIATED TRUCKLOAD!NG, CONTAlNERLOADlNG AND CARLOADING M!L ITARY hi IL -HDBK -236 INAVYI. IEV TDA SYSCOM STANDARDS, REFER TO INDEX TO STANDARDS, REVISION

5、 DESCRIPTION TR APPROVAL I FSC 8140 DATE THIS UNIT LOAD IS AUTHORIZED AND RELEASED FOR DEPOT HANDLING AND STORAGE AND FOR SHIPMENT BY COMMON CARRIER. REQUIREMENT FOR CONSTRUCTION OF THIS UNIT LOAD SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF MIL-STD-1322 NAWI. Provided by IHSNot for Resale

6、No reproduction or networking permitted without license from IHS-,-,-MIL-STD-1322-94 (NAWI PALLETIZING PROCEDURE IA) THREAD STRAPPING, ITEM 2, THROUGH SLOTS IN PALLET DECK, ITEM I, AS SHOWN IN DETAIL A. (BI POSITION THE CONTAINERS ON THE PALLET WITH EQUAL OVERHANG AT BOTH ENDS AND EQUAL IC) ID1 IEi

7、MARKING: OVERHANG ON BOTH SIDES. POSITION STRAPPING, ITEM 3, UNDER THE PALLET DECK AND OVER THE UNIT LOAD WITH THE BATTENS, ITEM 5, UNDER THE STRAPPING. TENSION AND DOUBLE NOTCH THE SEALS, ITEM 4. POSITION STRAPPINO, ITEM 2, OVER THE UNIT LOAD. TENSION AND DOUBLE NOTCH THE SEALS, ITEM 4. SECURE STRA

8、PPING TO THE BATTENS WITH STAPLES.ITEM 6. IN ADDITION TO ANY SPECIAL MARKING REQUIRED BY CONTRACT OR ORDER, THE UNIT LOAD SHALL BE MAKED IN ACCORDANCE WITH MIL-STD-I322 (NAVY). DETAIL DEPALLETIZING PROCEDURE IA) REMOVE STAPLES. (BI CUT AND REMOVE STRAPPING. LC) REMOVE BATTENS. IO1 REMOVE CONTAINERS. I LIST OF MATERIALS REV!EW ACTIVITY i NAVY -OS PAGE 2 PREPARING ACTIV!TY: NAVY - OS IPROJECT NO. 8140-N754) *U.S. GOVERNMENT PRINTING OFFICE 1909: - C14-033/13853 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-