NAVY MIL-I-22768-1961 INDICATORS FREQUENCY CHANNEL ID-808( ) ASQ AND ID-1311( ) ASQ《ID-808( ) ASQ 及 ID-1311( ) ASQ型频道指示器》.pdf

《NAVY MIL-I-22768-1961 INDICATORS FREQUENCY CHANNEL ID-808( ) ASQ AND ID-1311( ) ASQ《ID-808( ) ASQ 及 ID-1311( ) ASQ型频道指示器》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-I-22768-1961 INDICATORS FREQUENCY CHANNEL ID-808( ) ASQ AND ID-1311( ) ASQ《ID-808( ) ASQ 及 ID-1311( ) ASQ型频道指示器》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、/I MIL-1-22768 58 m 79777Ob OL5Lbb7 Lt m M IL-1-22768 (WEP) 15 FEBRUARY 1961 MILITARY SPECIFICATION INDICATOR, FREQUENCY CHANNEL Io-808(*)/ASQ This specification has been approved by the Bureau of Naval Weapons, . Department of the Navy. 1. SCOPE 1.1 Scope - The equipment covered by this specificati

2、on shall provide remote digital indication of the UHF communications preset channels when operated with Receiver-Transmitter, Radio RT- 546/ASQ-19 or equivalent equipments. Associated Equipment - The equipment shall operate with the following associated equipment which shall not be supplied as part

3、of the equipment. Control, Central C-3076/AS 3 excpt 4.5 Life Test - Life test of the equipment shail consist of 50,000 operations with performance checks at approximately 10,000 cycle intervals, 5. PREPARATION FOR DELIVERY 54 1 General - Preparation for delivery shall be in accordance with Specific

4、ation MIL-1-18309, 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-I-227b8 58 m 7797706 0151671 b W =-I- 22768wEP) 6. NOTES 6.1 Use - This equipment is mainly intended to be used as part of the integrated Electronic Central AVASQ-19. in this ce

5、ntral it provides a visual, digital display of the channel to which the RT-546/ASQ-19 is tuned. at input voltages of 27.5 f O. 5 volts dc and 5 i O. 1 volts ac. These data are to be used in testing the equipment at installation points for compliance with minimum acceptable standards of performance,

6、6.2 Test Values - Normal and limiting values of performance data shall be determined 6.3 Precedence - When the requirements of the contract, this specification, or (i) Contract - The contract shall have precedence over any specification. (2) Central Specification - Integrated Electronic Central AN/A

7、SQ-19, applicable subsidiary specifications are in conflict, the following precedence shall apply: Specification MIL-1-18309 shall have precedence over this specification. (3) This Specification - This specification shall haue precedence over ali applicable subsidiary specifications. Any deviation f

8、rom this specification, or from subsidiary specifications where applicable, shall be approved in writing by the procuring activity. (4) Referenced Specifications - Any referenced specification shall have preference over all applicable subsidiary specifications referenced therein, Ail referenced spec

9、ifications shqli apply to the extent specified. 6.4 The parentheses (*), when used in the type designation, shall be replaced by either a number or letter furnished by the procuring activity upon application by the contractor for assignment of nomenclature in accordance with 3.2.10 of Specification

10、MIL-1-18309. The complete type number shall be used on nameplates, shipping records and instruction books, as applicable. NOTICE - When government drawings, specifications, or other data are used for any purpose other than in connection with a definitely related Government procurement operation, the

11、 United States Government thereby incurs no responsibility nor any obligation whatsoever; and the fact that the Government may have formulated, furnished or in any way supplied the said drawings, specifications or other data is not to be regarded by implication or otherwise as in any manner licensing the holder or any other person or corporation, or conveying any rights or permission to manufacture, use or sell any patented invention that may in any way be related thereto. r- - I- 5 H33122 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-