NAVY MIL-C-19002 D-1985 CLOTH COATED AND STRIP COATED CLOTH-POLYCHLOROPRENE ON NYLON《涂层布-氯丁对尼龙带涂层布》.pdf

《NAVY MIL-C-19002 D-1985 CLOTH COATED AND STRIP COATED CLOTH-POLYCHLOROPRENE ON NYLON《涂层布-氯丁对尼龙带涂层布》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-C-19002 D-1985 CLOTH COATED AND STRIP COATED CLOTH-POLYCHLOROPRENE ON NYLON《涂层布-氯丁对尼龙带涂层布》.pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、27- 70 MIL-C-17002D 83 7797706 0381317 2 mF Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Engineering and Standardization Department (Code 931, Naval Air Engineering Center, Lakehurst, NJ 0873

2、3, by using the self-addressed standardization Document Improve- -ment Proposal (DD Form 1426) appearing at the end of this document or by letter. Systems MIL-C-19002D 30 June 1985 SUPERSEDING MI L-C- 1 9002C 17 July 1968 MILITARY SPECIFICATION CLOTH, COATED, AND STRIP, COATED CLOTH - POLYCHLOROPREN

3、E ON NYLON This specification is approved for usa by all Departments and Agencies of the Department of-Defense. 1. SCOPE 1.1 Scope. The specification covers the requirements for nylon base polychloroprene coated cloth and coated cloth strip for use in the manufacture of pneumatic life preservers and

4、 waterproof garments. in the following types and classes, as specified (see 6.2.1). 1.2 Classification. The polychloroprene coated nylon shall be furnished Type I - Coated cloth (coated on one side) Type II - Coated cloth strip (coated on both sides - uncured on one side) Class I - Light weight stri

5、p Class 2 - Medium weight strip side) sides) Type III - Coated cloth strip (coated on one side - uncured on coated Type IV - Coated cloth strip (coated on both sides - uncured on both 2. APPLICABLE WCUMENTS 2.1 Government documents. 2.1.1 Specifications, standards, and handbooks. Unless otherwise sp

6、ecified, the following specifications, standards, and handbooks of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DODISSI specified in the solicitation form a part of this Specification to the extent specified herein. FSC 8305 DISTRIBUTION STATEMEN

7、T A, Approved for public release; distribution is unlimited. r THIS DOCUMENT CONTAINS / 504 1 f Table III i ! I 5100 i 5850/5100 I “58M:lOO 1 Table III , Table III i 4.6.5 I I i Table III i 4.6.6 i i Table III 4.6.7 I , - 11 - 2/ - 3/ Exposed for 96 hours at 70“ Exposed for 50 hours with uncoated si

8、de exposed to light source and spray heads shut off. Test method nos are FED-STD-191. 1C (158“ $r 2F). 14 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-L7002D 83 7779706 0381333 7 _ MIL-C-190020 OR STUD FIGURE 1. Air leakage inspection apparatus. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-