ITU-T X 733-1992 Information Technology - Open Systems Interconnection - Systems Management Alarm Reporting Function (Study Group VII) 24 pp《信息技术 开放系统互连 系统管理 告警报告功能》.pdf

《ITU-T X 733-1992 Information Technology - Open Systems Interconnection - Systems Management Alarm Reporting Function (Study Group VII) 24 pp《信息技术 开放系统互连 系统管理 告警报告功能》.pdf》由会员分享，可在线阅读，更多相关《ITU-T X 733-1992 Information Technology - Open Systems Interconnection - Systems Management Alarm Reporting Function (Study Group VII) 24 pp《信息技术 开放系统互连 系统管理 告警报告功能》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、CCITT RECMNrX.733 92 4862571 0574305 789 W INTERNATIONAL TELECOMMUNICATION UNION CCITT THE INTERNATIONAL TELEGRAPH AND TELEPHONE CONSULTATIVE COMMITTEE DATA COMMUNICATION NETWORKS x.733 INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEMS MANAGEMENT: ALARM REPORTING FUNCTION Recommendatio

2、n X.733 Geneva, 1992 CCITT RECMN*Xe733 72 m 4862571 O574306 bL5 m INTERNATIONAL TELECOMMUNICATION UNION CCITT TH E INTERNATIONAL TELEGRAPH AND TELEPHONE CONSULTATIVE COMMITTEE DATA COMMUNICATION NETWORKS x.733 INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEMS MANAGEMNT: ALARM REPORTING

3、 FUNCTION Recommendation X.733 Geneva, 1992 _ _ _ _ _- - -. _ - CCITT RECMN*X.733 92 m 48b259L 0574307 551 Foreword ITU (International Telecommunication Union) is the United Nations Specialized Agency in the field of telecommunications. The CCIT (the International Telegraph and Telephone Consultativ

4、e Committee) is a permanent organ of the ITU. Some 166 member countries, 68 telecom operating entities, 163 scientific and industrial organizations and 39 international organizations participate in CCITT which is the body which sets world telecommunications standards (Recommendations). The approval

5、of Recommendations by the members of CCITT is covered by the procedure laid down in CCITT Resolution No. 2 (Melbourne, 1988). In addition, the Plenary Assembly of CCITT, which meets every four years, approves Recommendations submitted to it and establishes the study programme for the following perio

6、d. In some areas of information technology, which fall within CCITTs purview, the necessary standards are prepared on a collaborative basis with IS0 and IEC. The text of CCITT Recommendation X.733 was approved on 10th of February 1992. The identical text is also published as ISO/IEC International St

7、andard 10164-4. CCIT” NOTE In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized private operating agency. O ITU 1992 All rights reserved. No part of this publication may be reproduced or utilized in any f

8、orm or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU. 1 2 3 4 5 6 7 8 9 10 11 Contents Scope . Normative references . 2.1 Identical CCIT Recommendations I International Standards . 2.2 Paired CCITT Recommendations I Internati

9、onal Standards equivalent in technical content . 2.3 Additional references Definitions . 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Basic reference model definitions . Management framework definitions CMIS definitions . Systems management overview definitions . Event report management function definitions OS1 conf

10、ormance testing definitions . Additional definitions . Symbols and abbreviations Conventions . Requuemen ts . Model Generic Definitions 8.1 Generic notifications . 8.2 Managed objects . 8.3 Compliance . Service definition 9.2 Alarm reporting service Functional units . Protocol . 11.1 Elements of pro

11、cedure 11.2 Abstract syntax . 11.3 Negotiation of the alarm reporting functional unit . Page 1 2 2 2 3 3 3 3 3 3 3 4 4 4 4 4 5 5 5 11 11 11 11 11 12 12 13 16 _ _._ . CCITT RECMNzX.733 92 = 4862593 0574309 324 12 Relationships with other functions . 13 Conformance . 13.1 General conformance class req

12、uirements 13.2 Dependent conformance class requirements Annex A - Example Probable cause usage . 16 16 16 17 18 CCITT RECMN*X.733 92 m 4862593 057Ll330 046 m X.701 I10040 X.710 I9595 X.711 I 9596-1 X.712 19596-2 I CCT Recommendation I Short Title I System Management Overview Common Management Inform

13、ation Service Definition Common Management Information Protocol Specification cm PICS I ISOiEC International Standard 1 I X.721 110165-2 X.700 17498-4 (Note) I Management Framework I Definition of Management Information X.730 I 10164-1 I X.720 I 10165-1 I Management Information Model Object Manageme

14、nt Function X.733 I 10164-4 I X.722 I 10165-4 I Guidelines for the Definition of Managed Objects l Alarm Reporting Function X.735 110164-6 X.736 I 10164-7 X.740 I 10164-8 I X.731 110164-2 I State Management Function I Log Control Function Security Alarm Reporting Function Security Audit Trail Functi

15、on INFORMATION NOTE The following table gives a list of X.700 Series Recommendations which were developed in collaboration with the ISOIEC aiid are identical to the corresponding International Standard. Cross-references to the corresponding ISO/IEC International Standard number and the short titie o

16、f the Recommendation I International Standard are provided. I X.732 I 10164-3 I Attributes for Representing Relationships I I Event Management Function I I X.734 I 10164-5 CCITT RECNN8X.733 92 W 4862593 0574333 T82 W ISO/IEC 10164-4 : 1992 (E) INTERNATIONAL STANDARD CCIT RECOMMENDATION INFORMATION T

17、ECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEMS MANAGEMENT: ALARM REPORTING FUNCTION 1 Scope This Recommendation I International Standard defines a Systems Management Function that may be used by an application process in a centralized or decentralized management environment to interact for the p

18、urpose of systems management, as defined by CCIT Rec. X.700 I ISO/IEC 7498-4. This Recommendation I International Standard defines a function which consists of generic definitions, services and functional units. This function is positioned in the application layer of the OS1 reference model (CCrrYr

19、Rec. X.200 I IS0 7498) and is defined according to the model provided by ISO/IEC 9545. The role of systems management functions is described by CCIIIT Rec. X.701 I ISO/IEC 10040. The alarm notifications defined by this function provides information that a manager may need to act upon pertaining to a

20、 systems operational condition and quality of service. This Recommendation I International Standard establishes user requirements for the darm reporting function; establishes a model that relates the service and generic definitions provided by this function to user requirements; defines the service

21、provided by the function; defines generic notification types and parameters documented in accordance with CCITT Rec. X.722 I specifies the protocol that is necessary in order to provide the service; specifies the abstract syntax necessary to identify and negotiate the functional unit in protocol; de

22、fines the relationship between this service and SMI notifications; specifies compliance requirements placed on other standards that make use of these generic definitions; defines relationships with other systems management functions; specifies conformance requirements. ISO/IEC 10165-4; This Recommen

23、dation I International Standard does not - - - - define the nature of any implementation intended to provide the Alarm Reporting function; specify the manner in which management is accomplished by the user of the Alarm Reporting function; define the nature of any interactions which result in the use

24、 of the Alarm Reporting function; specify the services necessary for the establishment, normal and abnormal release of a management association; preclude the definition of further notification types; - - define managed objects. CCI“ Rec. X.733 (1992 E) 1 CCITT RECMN*X.733 92 m 4862591 0574332 939 M

25、2 Normative references The following CCIT Recommendations and International Standards contain provisions which, through reference in this text, constitute provisions of this Recommendation I International Standard. At the time of publication, the editions indicated were valid. Ail Recommendations an

26、d Standards are subject to revision, and parties to agreements based on this Recommendation I Internationai Standard are encouraged to investigate the possibility of applying the most recent editions of the Recommendations and Standards indicated below. Members of IEC and IS0 maintain registers of c

27、urrently valid International Standards. The CCITT Secretariat maintains a list of the currently valid CCITT Recommendations. 2.1 Identical CCITT Recommendations I International Standards - CCITT Recommendation X.701 (1992) I ISO/IEC 10040 : 1992, Information technology - Open Systems Interconnection

28、 - Systems management overview. CCIT Recommendation X.731 (1992) I ISOKEC 10164-2 : 1992, Information technology - Open Systems Interconnection - Systems Management - State management fitnetion. CCIT Recommendation X.732 (1992) I ISOLEC 10164-3 : 1992, Information technology - Open Systems Interconn

29、ection - Systems Management - Attributes for representing relationships. CCITT Recommendation X.734l) I ISO/IEC 10164-5 : 1992, Information technology - Open Systems Interconnection - Systems Management - Event report management function. CCIT Recommendation X.720 (1992) I ISO/IEC 10165-1 : 1992, In

30、formation technology - Open Systems Interconnection - Structure of management information - Management injormation model, CCIT Recommendation X.721 (1992) I ISOKEC 10165-2 : 1992, Information technology - Open Systems Interconnection - Structure of management informatio? - Definition of management i

31、nformation. CCITT Recommendation X.722 (1992) I ISOLEC 10165-4 : 1992, Information technology - Open Systems Interconnection - Structure of Management Information - Guidelines for the definition of managed objects. - - - - - - 2.2 Paired CCITT Recommendations I International Standards equivalent in

32、technical content - CCIT Recommendation X.7OO1) , Management framework for Open systems Interconnection (OSI) for CCIT applications. ISO/IEC 7498-4 : 1989, Information processing systems - Open Systems Interconnection - Basic Reference Model - Part 4 .- Managementflamework. CCIT Recommendation X.200

33、 (1988), Reference Model of Open Systems Interconnection for CCIT Applications. IS0 7498 : 1984, Information processing systems - Open Systems Interconnection - Basic Reference Model. CCIT Recommendation X.208 (1988), SpecQcation of abstract syntax notation one (ASN.1). ISOLEC 8824 : 1990, Informati

34、on technology - Open Systems Interconnection - Specification of Abstract Syntax Notation One (ASN.1). CCIT Recommendation X.210 (1988), Reference Model of Open Systems Interconnection (OSI) Layer Service Definition Conventions for CCITT Applications. ISOR 8509 : 1987, Information processing systems

35、- Open Systems Interconnection - Service conventions. CCIT Recommendation X.710 (1991), Common Management Information Service Definition for CCK Applications. ISOEC 9595 : 1991, Information technology - Open Systems Interconnection - Common management information service definition. - - - - Presentl

36、y at state of draft Recommendation. 2 CCI“ Rec. X.733 (1992 E) ISO/JEC 10164-4 : 1992 (E) I 3.4 Systems management overview definitions - CCITT Recommendation X.290 (1992), OSI Conformance Testing Methodology and Framework for Protocol Recommendationsfor CCIIT Applications - General Concepts. ISOAEC

37、 9646- 1 : 199 1, Information technology - Open Systems Interconnection coafonnance testing methodology and framework - Part 1: General concepts. 2.3 Additional references - ISOLEC 9545 : 1989, Information processing systems - Open Systems Interconnection - Application Layer structure. 3 Definitions

38、 For the purposes of this Recommendation I International Standard, the following definitions apply. 3.1 Basic reference model definitions This Recommendation I International Standard makes use of the following terms defined in CCITT Rec. X.200 I IS0 7498. a) open system; b) systems management. 3.2 M

39、anagement framework definitions This Recommendation I International Standard makes use of the following terms defined in CCIIIT Rec. X.700 I ISOEC 7498-4. managed object 3.3 CMIS definitions This Recommendation I International Standard makes use of the following terms defined in CCITT Rec. X.710 I I

40、SOAEC 9595. attribute This Recommendation I International Standard makes use of the following terms defined in CCm Rec. X.701 I ISOEC 10040. a) agent; b) agent role; c) dependent conformance; d) general conformance; e) generic definitions; f) manager: g) manager role; h) notification; i) systems man

41、agement application protocol; j) systems management functional unit. 3.5 This Recommendation I International Standard makes use of the following terms defined in CCIIIT Rec. X.734 I Event report management function definitions ISOEC 10164-5. event forwarding discriminator CCK Rec. X.733 (1992 E) 3 -

42、 - - CCITT RECMN*X.733 92 m 4862591 057i33i 793 m 3.6 OS1 conformance testing definitions This Recommendation I International Standard makes use of the following terms defined in CCITT Rec. X.290 I ISO/IEC 9646-1. system conformance statement 3.7 Additional definitions For the purposes of this Recom

43、mendation I International Standard, the following definitions apply. 3.7.1 error: A deviation of a system from normal operation. 3.7.2 fault: The physical or algorithmic cause of a malfunction. Faults manifest themselves as errors. 3.7.3 represent an error. alarm: A notification, of the form defined

44、 by this function, of a specific event. An alarm may or may not 3.7.4 alarm report: A specific type of event report used to convey alarm information. 4 Abbreviations ASN. 1 Abstract Syntax Notation One CMIS Common Management Information Service Conf Confm Ind Indication MAPDU Req Request RSP Respons

45、e SMAPM Management Application Protocol Data Unit Systems Management Application Protocol Machine 5 Conventions This Recommendation I International Standard defines services following the descriptive conventions defined in CCITT Rec. X.210 I ISOR 8509. In clause 9, the definition of each service inc

46、ludes a table that lists the parameters of its primitives. For a given primitive, the presence of each parameter is described by one of the following values M the parameter is mandatory (=I the value of the parameter is equal to the value of the parameter in the column to the left U the use of the p

47、arameter is a service-user option. - the parameter is not present in the interaction described by the primitive concerned. C the parameter is conditional. The condition(s) are defined by the text which describes the parameter. P subject to the constraints imposed on the parameter by CCIT Rec. X.710

48、I ISO/iEC 9595. NOTE - The parameters which are marked “P“ in service tables of this Recommendation I International Standard are mapped directly onto the corresponding parameters of the CMIS service primitive, without changing the semantics or syntax of the parameters. The remaining parameters are u

49、sed to construct an MAPDU. 6 Requirements The requirements satisfied by this function are the reporting of alarms, errors and related information, in a standard fashion. 4 CC“ Rec. X.733 (1992 E) I CCITT RECflN*X.733 92 m 4862591 0574335 628 m ISO/IEC 10164-4 : 1992 (E) 7 Model Early detection of faults before significant effects have been felt by the user is a desirable requirement of communicating systems. Degradation of service may be detected by monitoring of error rates. Threshold mechanisms on counters and gauges are a method of det