GMKOREA EDS-T-7039-2010 Test Method of the Gear Shifting and Selector Lever Heads (Version 3 English Korean This standard may be applied only for current project (incl 200 Series) re.pdf

《GMKOREA EDS-T-7039-2010 Test Method of the Gear Shifting and Selector Lever Heads (Version 3 English Korean This standard may be applied only for current project (incl 200 Series) re.pdf》由会员分享，可在线阅读，更多相关《GMKOREA EDS-T-7039-2010 Test Method of the Gear Shifting and Selector Lever Heads (Version 3 English Korean This standard may be applied only for current project (incl 200 Series) re.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、 GMDAT ENGINEERING STANDARDS General Specification Powertrain Integration SUPERCEDED EDS-T-7039 Test Method of the Gear Shifting and Selector Lever Heads This standard may be applied only for current project (incl. 200 Series). It is Superceded for all future projects and replaced by GMW15607. d64F8

2、C -C 2t)=Bd)8 88x 7 , F6* 72T8p) F$ . 1.1 +95 . 8 4G 8t d64F8C -C 2t)=Bd )07 38%P E:48x 957F$ . 2.1 17 E:4 / . F$-1F 68 . 2.2 GM E:4 / . EDS-T-7415 EDS-T-7603 EDS-T-7619 EDS-T-7641 EDS-T-7602 EDS-T-7618 EDS-T-7620 GMW3059 3 4G D 3.1 7x9PE D# F .8x 4G D8p) 17F%L 384G 8t 3 P , E:B -C 3L81# 1P 818p) F$

3、 . 3.2 9PE8x )=Fd 98 )=8# d3T 7$ 2).Bd ., 8 7 ?* +9F# :8 7 .7 $4F7 4G 8x 38 -O6x6 F$ . GMDAT ENGINEERING STANDARDS EDS-T-7039 Copyright 2010 General Motors Company All Rights Reserved November 2010 Page 2 of 4 Version : 3 3.3 Any changes in materials, processing etc. subsequently made require reappr

4、oval by GMDAT technical center. It is the sole responsibility of the supplier to inform the purchaser of any such changes and to resubmit samples for approval. 3.4 Deviations from the requirements of this specification shall have been agreed upon shall be specified on the individual component drawin

5、gs, material specifications etc. and shall be notes on all test certificates, reports etc. 4 Conditioning Test pieces shall not be tested within 72 hours of manufacture. 5 Apparatus 5.1 Apparatus as required by paragraph 7. 5.2 Drying oven capable of maintaining the specified temperatures within the

6、 specified tolerances. 5.3 Humidity cabinet capable of maintaining the specified conditions within the specified tolerances. 5.4 Refrigerator or cold box capable of maintaining (-25) E to within 3K. 6 Types Two types are specified according to core material and material of coating surface. 6.1 Type

7、A. Core is made of solid polyamide or fine zinc alloy for die casting and cover is made of soft polyvinylchloride (PVC) or polyurethane-integral foam. 6.2 Type B. Cover is wood-grained gloss treated or painted. 7 Test Methods and Requirements 7.1 General Requirements. Supplied products shall be free

8、 from crack, split or other harmful defects. 7.2 Detailed Requirements. 7.2.1 Abrasion Resistance (applicable only to Type B). 7.2.1.1 The test shall be performed to EDS-T-7619-Y-A. But, in case of printing part, the requirements for printing part shall be separately indicated on the drawing. When n

9、ot specified, the requirements are excluded 7.2.1.2 Surface of test piece shall no sign of marked abrasion. (No marked abrasion in printing part) 3.3 2 72 48 81 0F 9PE72P =x?F7 4G F$ . 5 4G d -C 46 5.1 79) 9P9I / -PF%L6$ Issue / P9I8)Y Publication Date / 38 88 Description (Organization) / 9P /P9I 76 (:04.2P ) 3 NOV 2010 Superceded (Thermal/ICE Subsystem Validation Team) / F9I957 =* (Thermal/ICE .ED4D4 )