GMKOREA EDS-M-6808-2003 POLYURETHANE FOAM FOR MOLDED PARTS (VERSION 3).pdf

《GMKOREA EDS-M-6808-2003 POLYURETHANE FOAM FOR MOLDED PARTS (VERSION 3).pdf》由会员分享，可在线阅读，更多相关《GMKOREA EDS-M-6808-2003 POLYURETHANE FOAM FOR MOLDED PARTS (VERSION 3).pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、GM DAEWOO Auto EDS-M-0102). 7. AUTOMOTIVE RESTRICTED HAZARDOUS SUBSTANCES Materials and components of parts must comply with EDS-A-0101. EDS-M-6808POLYURETHANE FOAM FOR MOLDED PARTS PAGE: 3/3 ISSUED DATE: 1995. 08. 08 REVISED DATE: 2003. 06. 24 VERSION: 3 GM DAEWOO Auto & Technology 8. CODING SYSTEM

2、 This material specification shall be indicated in drawings or other specifications as follows. “EDS-M-6808” 9. RELATED STANDARDS EDS-A-0101 Automotive restricted hazardous substances for parts EDS-M-0102 Procedures for approval of chemical raw material and quality control EDS-T-7607 Test method for

3、 determining the compatibility of upholstery trims material in contact EDS-T-7613 Test method for determining the air permeability of trims materials EDS-T-7618 The test method for the resistance to cleaning agents of automotive components EDS-T-7668 Test method for determining the deflection of cel

4、lular and related materials under compression load EDS-T-7669 Test method for tensile strength and elongation of cellular materials EDS-T-7670 Test method for compression set of cellular material EDS-T-7673 Test method for apparent density of cellular materials EDS-T-7677 Determination of tear propagation strength EDS-T-7678 Test for hardness number of foam components EDS-T-7694 Test method for determining fogging characteristics of automotive interior trims materials