GEIA-STD-0003-2006 Long Term Storage of Electronic Devices《电子器件的长期储存》.pdf

《GEIA-STD-0003-2006 Long Term Storage of Electronic Devices《电子器件的长期储存》.pdf》由会员分享，可在线阅读，更多相关《GEIA-STD-0003-2006 Long Term Storage of Electronic Devices《电子器件的长期储存》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、GEIA STANDARD Long Term Storage of Electronic Devices GEIA-STD-0003 January 2006 GOVERNMENT ELECTRONICS AND INFORNIATION TECHNOLOGY ASSOCIATION A Sector of the Electronic Industries Allianc Copyright Government Electronics & Information Technology Association Provided by IHS under license with GEIA

2、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE GEIA Engineering Standards and Publications are designed to serve the public interest by eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of pr

3、oducts, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of GEIA from manufacturing or selling products not conforming to such S

4、tandards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than GEIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by GEIA in accordance with the Americ

5、an National Standards Institute (ANSI) patent policy. By such action, GEIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This GEIA Standard is considered to have International Standardization implication

6、s, but the ISO/IEC activity has not progressed to the point where a valid comparison between the GEIA Standard and the ISO/IEC document can be made. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibili

7、ty of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (Formulated under the cognizance of the GEIA G-12 Solid State Devices Committee.) Published by O 2006 Government Electronics and Informati

8、on Technology Association Standards & Technology Department 2500 Wilson Boulevard Arlington, VA 2220 1 All rights reserved Printed in U.S.A. Copyright Government Electronics & Information Technology Association Provided by IHS under license with GEIA Not for ResaleNo reproduction or networking permi

9、tted without license from IHS-,-,-Copyright Government Electronics & Information Technology Association Provided by IHS under license with GEIA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-Government Elect ron i cs and I n fo rma t io n Tech no logy Association

10、(GEIA) Long Term Storage of Electronic Devices GEIA-STD-0003 Revision I Description of change I Date I Initial Release I Jan 06 Copyright Government Electronics & Information Technology Association Provided by IHS under license with GEIA Not for ResaleNo reproduction or networking permitted without

11、license from IHS-,-,-GEIA- STD-0003 CONTENTS ACKNOWLEDGMENTS ii FOREWORD ii 1 PURPOSE . 1 1.1 Scope 1 2 REFERENCE DOCUMENTS 1 3 REQUIREMENTS 1 3.1 Storage Conditions . 1 3.2 Storage containers 2 3.3 Levels . 2 3.4 Storage Elements . 2 3.5 Long Term Storage Control . 3 i Copyright Government Electron

12、ics & Information Technology Association Provided by IHS under license with GEIA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-GEIA- STD-0003 ACKNOWLEDGMENTS Members of Task Group GTG03-03 of the GEIA G-12 Solid State Devices Committee developed this document. Th

13、e Task Group and Committee would like to recognize the principle contributors shown below and to extend gratitude to the many others who assisted in the evolution of this Standard. Ken Finney - Boeing Wes Hubbell - Raytheon Sharron Peek - Avnet Ed Sullivan Textron Gene Gomez, White Sands Missile Ran

14、ge Anduin Touw - Boeing Satellite Systems John Nirschl Rockwell Collins Laurie Ruiz , White Sands Missile Range Jeff Jarvis, ARMY Redstone Arsenal Ken Lannan, NAVY - Crane Roger Sloan , White Sands Missile Range Jim Erickson - Boeing Satellite Systems FOREWORD Some electronic device users have the n

15、eed to store electronic devices for long periods of time. Lifetime buys are commonly made to support production runs of assemblies that well exceed the production timeframe of its individual parts. This puts the user in a situation requiring careful and adequate storage of such parts to maintain the

16、 as-received solderability and minimize any degradation effects to the part over time. Major degradation concerns are Moisture, Electrostatic Fields, Ultra- Violet Light, Large variations in temperature, Air-Borne Contaminants, and outgassing. Warranties and sparing also present a challenge for the

17、user or repair agency as some systems have been designated to be used for long periods of time, in some cases for up to 40 years or more. Some of the devices needed for repair of these systems will not be available from the original supplier for the lifetime of the system or the spare assembly may b

18、e built with the original production run but then require long term storage This document was developed to provide a standard for storing electronic devices for long periods of time. For storage of devices that are moisture sensitive but that do not need to be stored for long periods of time, refer

19、to JESD-033. 11 Copyright Government Electronics & Information Technology Association Provided by IHS under license with GEIA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-GEIA- STD-0003 1 PURPOSE This document is generated to provide an industry standard for Lon

20、g Term Storage (LTS) of electronic devices by drawing from the best long term storage practices currently known. For the purposes of this document, LTS is defined as any device storage for more than 12 months but typically much longer. While intended to address the storage of unpackaged semiconducto

21、rs and packaged electronic devices, nothing in this standard precludes the storage of other items under the storage levels defined herein. 1.1 Scope 1.1.1 electronic, electro-mechanical (EEE) item, or assemblies using such items. This standard is intended to ensure that adequate reliability is achie

22、ved for devices in user applications after long term storage. Users are encouraged to request data from suppliers to this specification that demonstrates a successful storage life requested by the user. This standard is not intended to address built-in failure mechanisms that would take place regard

23、less of storage conditions. Packaged Electronic Devices. Electronic Devices are defined as any packaged electrical, 1.1.2 Unpackaged semiconductors. Unpackaged semiconductors are semiconductor wafer or dice. 1.2.3 would store electronic devices or unpackaged semiconductors. m. The user of this long

24、term storage standard may be any organization or entity who 2 REFERENCE DOCUMENTS MILITARY MIL-PRF-2740 1 MIL-PRF-8 1705 Propellant Pressurizing Agent, Nitrogen Barrier Materials, Flexible, Electrostatic Protective, Heat-Sealable INDUSTRY Electronic Industries Alliance, JEDEC Solid State Technology

25、Association JESD 625 Requirements for Handling Electrostatic-Discharge-Sensitive (ESDS) Devices JESD-033 Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices 3 REQUIREMENTS 3.1 Storage Conditions When this Standard is invoked, it is intended that specific storage le

26、vel(s) per SecLkw 3.3 be specified. When invoked without specifying a level, Level 2 shall apply. When Level 2 is specified, it may be satisfied either with a portable storage container per S.:.or a fixed storage location per Yectioii 3.2.1. Level 4 may be used to meet Level 3 requirements. Level 3

27、may be used to meet Level 1 andor Level 2 requirements. 1 Copyright Government Electronics & Information Technology Association Provided by IHS under license with GEIA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-GEIA- STD-0003 3.2 Storage Containers 3.2.1 in ac

28、cordance with Se.?,.T. Parts shall be exposed to ambient air for as limited a time as possible, and shall be re-packaged or stored in 8 hours or less. Type A containers may be reused, so long as they are visibly inspected and show no damage. New desiccant shall be used for initial storage, and for e

29、very subsequent re packaging (if type A container). 3.5.3.1 Materials allowed inside Type A containers. No material shall be placed inside the container that is associated with outgassing (e.g. paper, cardboard, adhesives), even if this material was delivered as original packaging material from the

30、supplier. 3.5.4 is maintained. 3.5.5 handled in accordance with the manufacturers recommendations and in accordance with Section 3.5.1. Upon completion, parts shall be returned to storage per Seclim 3.5.3. Inventon, Control Process. A tracking system must be established to ensure that traceability S

31、torage Assessment - Optional. If surveillance is performed, the exposed parts shall be 3.5.6 accordance with Sctijr.3.J.I. Remaining parts shall be returned to storage per Sectiori 3.5.3. 3.5.7 labeled with the following minimum information: a. part number andor user identification traceable by the

32、user to the part number b. date/lot code c. quantity d. Long Term Storage “LTS” and Level. (i.e., LTS-1) e. Seal/Reseal Date f. ESDS, if applicable per JESD 625 Marking shall be permanent and legible to the extent that the marking shall not become illegible during normal handling over the storage li

33、fe of the part. Partial Removal from Storage. If a partial removal is performed, parts shall be handled in Marking. The exterior packaging for “Type A Containers” that the part is stored in shall be 4 Copyright Government Electronics & Information Technology Association Provided by IHS under license

34、 with GEIA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-GEIA Document Improvement Proposal Submitters Name: If, in the review or use of this document, a potential change is made evident for safety, health, or technical reasons please fill in the appropriate info

35、rmation below and mail or FAX to: Telephone No.: FAX No.: E-mail: Government Electronics and Information Technology Association (GEIA) Standards & Technology Department 2500 Wilson Blvd. Arlington, VA 2220 1 FAX: (703) 907-7968 Urgency - of Change: Immediate : Document No. - At next revision: I Docu

36、ment Title: b. Recommended Changes: c. ReasodRationale for Recommendation: Additional Remarks: Signature: I Date: FOR GEIA USE ONLY Responsible Committee: Chairman: Date comments forwarded to Committee Chairman: Copyright Government Electronics & Information Technology Association Provided by IHS under license with GEIA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Government Electronics & Information Technology Association Provided by IHS under license with GEIA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-