FORD WSS-M1C262-A-2008 GREASE FLUOROSILICONE PTFE TO BE USED WITH FORD WSS-M99P1111-A 《聚四氟乙烯（PTFE）氟硅橡胶润滑脂 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M13P12-A FORD WSS-M13P12-A FOR.pdf

《FORD WSS-M1C262-A-2008 GREASE FLUOROSILICONE PTFE TO BE USED WITH FORD WSS-M99P1111-A 《聚四氟乙烯（PTFE）氟硅橡胶润滑脂 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M13P12-A FORD WSS-M13P12-A FOR.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M1C262-A-2008 GREASE FLUOROSILICONE PTFE TO BE USED WITH FORD WSS-M99P1111-A 《聚四氟乙烯（PTFE）氟硅橡胶润滑脂 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M13P12-A FORD WSS-M13P12-A FOR.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 10 20 N-STATUS Replaced by WSS-M13P12-A L. Schmalz, FNA 2004 05 20 Revised Para 3.0 inserted; para 3.1, 3.2, 3.3, 3.6 & 4 deleted 2000 01 06 Activated L. Mastrofrancesco Printed copies are uncontrolled Copyright 2008, Ford Global Technolo

2、gies, LLC Page 1 of 5 GREASE, FLUOROSILICONE, PTFE WSS-M1C262-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is an NLGI Grade 2 synthetic lubricating grease consisting of a fluorosilicone base oil thickened with a fluorinated polymer (PTFE). 2. APPLICATION This s

3、pecification was released originally for a lubricant to be used on vehicle interiors to prevent squeaks between soft materials (e.g., PVC, TPE, Leather, etc.), hard thermoplastics, (e.g., ABS, PA, PC, etc.), ferrous and non-ferrous metals (both painted and unpainted), and combinations thereof. The l

4、ubricant is suitable for operating temperatures between -40 and + 204 C. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1.1 Initial Qualifications

5、 The supplier must furnish to the affected Materials Engineering activity a completed and certified copy of the attached Supplement A and test reports demonstrating the capability of the process for the listed critical properties. 3.1.2 Ongoing Verification Plan In addition to the control plan, the

6、supplier and affected Materials Engineering activity shall establish a mutually agreed upon ongoing product verification plan which will be listed on Supplement B. 3.4 CONSISTENCY Material shall be a smooth homogenous product free from abrasive particles, it shall be consistent in color and texture,

7、 and free from objectionable odors during normal storage. It shall be suitable for the intended application. 3.5 FUNCTIONAL APPROVAL Materials being evaluated for initial approval may be subjected to a functional trial. Functional trial results shall be evaluated by the responsible Systems Engineeri

8、ng and Materials Engineering activities prior to material approval and release. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. ENGINEERING MATERIAL SPECIFICATIONWSS-M1C262-APrinted copies are uncontro

9、lled Copyright 2008, Ford Global Technologies, LLC Page 2 of 5 5.1 TYPICAL PROPERTIES The information shown is to provide data on products which have been qualified to this specification. The values shown do not constitute part of the requirements for initial qualification. 5.1.1 PENETRATION, worked

10、 60 strokes 265 - 295 (ASTM D 217) 5.1.2 BLEED, max 2.5% (MIL-S-791b, Method 321.2, 24 h. at 150 C) 5.1.3 EVAPORATION, max 1.0% (MIL-S-791b, Method 321.2, 24 h. at 150 C) 5.1.4 DROPPING POINT, min 260 C (ASTM D 566) 5.1.5 OXIDATION STABILITY, max 21 kPa (ASTM D 942, pressure drop in 100 h) 5.1.6 WAT

11、ER SPRAY-OFF, max 1.0% (ASTM D 4049, 5 min. at 38 C) 5.1.7 SWELL OF EPDM RUBBER, max 0.1% (ASTM D 471, 168 h. at 75 C) 5.1.8 CORROSION, max 5.0% (ASTM B 117, 500 h) (CRS Q-Panel, 0.23 +/- 0.04 mm thickness) 5.1.9 DIELECTRIC CONSTANT 5.5 (ASTM D 150) 5.1.10 LOW TEMPERATURE TORQUE (ASTM D 1478, -34 C)

12、 starting 3,600 gfcm running 2,360 gfcm 5.1.11 COMPATIBILITY WITH PLASTICS (FLTM BO 127-03) 14 days, 23 C Polycarbonate (PC) No Cracking or Crazing Acrylonitrile-Butadiene-Styrene (ABS) No Cracking or Crazing 50:50 PC/ABS Blend No Cracking or Crazing 14 days, 85 C Polycarbonate (PC) No Cracking or C

13、razing Acrylonitrile-Butadiene-Styrene (ABS) No Cracking or Crazing 50:50 PC/ABS Blend No Cracking or Crazing 5.2 SUPPLEMENT C This is to be used for additional information required for initial qualification. ENGINEERING MATERIAL SPECIFICATIONWSS-M1C262-APrinted copies are uncontrolled Copyright 200

14、8, Ford Global Technologies, LLC Page 3 of 5 Supplement A INITIAL QUALIFICATION Supplier_ Date_ Product Name_ NLGI Grade_ Product Code_ Batch No._ Manufacturing Plant Location(s)_ Physical/Chemical/Performance Properties Test Results Mfg. Limits (Mean, Std. Dev., (of 99.994% Base Oil Sample Size) of

15、 Production) Viscosity at 100 C mm2/s ASTM D 445 _ _ Viscosity at 40 C mm2/s ASTM D 445 _ _ Viscosity at -40 C mm2/s ASTM D 2983 _ _ Viscosity Index ASTM D 2270 _ _ Flash Point, C ASTM D 92 _ _ Pour Point, C ASTM D 97 _ _ Specific Gravity ASTM D 1298 _ _ ASTM D 4052 _ _ Grease Penetration mm/10 ASTM

16、 D 217 _ _ Worked after 60 strokes _ _ Worked after 100,000 strokes _ _ Moisture Content % ASTM D 95 _ _ Soap Content % ASTM D 128 _ _ Water Washout at 80 C ASTM D 1264 _ _ Dropping Point, C ASTM D 2265 _ _ Oxidation Stability ASTM D 942 _ _ Pressure Drop after 50 h Oil Separation ASTM D 1742 _ _ Co

17、pper Strip Corrosion ASTM D 130 _ _ Specific Gravity ASTM D 4052 _ _ Four Ball 0K Load ASTM D 2266 _ _ Corrosion IP 220 _ _ (DIN 51802) Refractive Index ASTM D 1218 _ _ Evaporation, 22 h, 100 C ASTM D 972 _ _ Others (Elementals, etc.) _ _ Signature_ Title_ ENGINEERING MATERIAL SPECIFICATIONWSS-M1C26

18、2-APrinted copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 4 of 5 Supplement B ONGOING PRODUCT VERIFICATION PLAN Supplier_ Date_ Product Name_ NLGI Grade_ Product Code_ Batch No._ Manufacturing Plant Location(s)_ Approved Physical/Chemical/Performance Properties Manufactur

19、ing Sample Size/ Limits Frequency Penetration after ASTM D 217 _ _ 60 strokes _ _ 100,000 strokes _ _ Four Ball, 0K load ASTM D 2266 _ _ Timken, 0K load ASTM D 2509 _ _ Wheel Bearing Leakage ASTM D 4290 _ _ Oil Separation % ASTM D 1742 _ _ Dropping Point ASTM D 566 _ _ Oxidation Stability ASTM D 942

20、 _ _ Pressure Drop after 1,000 h Water Washout at 38 C ASTM D 1264 At 38 C _ _ At 80 C _ _ Corrosion IP 220 _ _ (DIN 51802) Low Temperature Properties Low Temperature Torque ASTM D 4693 At -40 C Start (IP 186) _ _ Or Run _ _ Flow Pressure at -20 C DIN 51805 _ _ Remarks_ Signature_ Title_ Material En

21、gineering Concurrence_ ENGINEERING MATERIAL SPECIFICATIONWSS-M1C262-APrinted copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 5 of 5 Supplement C Supplier_ Date_ Product Name_ NLGI Grade_ Product Code_ Manufacturing Plant Location(s)_ Base Oil Manufacturing Limits Nominal V

22、iscosity Range, mm2/s Type Vol. % 100 C 40 C A _ _ _ _ B _ _ _ _ C _ _ _ _ D _ _ _ _ Thickener Filler/Structure Modifier/Solid Lubricant Type/Function Supplier Name Code Description A _ _ _ _ B _ _ _ _ C _ _ _ _ D _ _ _ _ Additives Additive Type/ Supplier Carrier/ in Final Function Name Code Description Type % Product % A _ _ _ B _ _ _ C _ _ _ D _ _ _ Signature_ Title_