FORD WSS-M10A85-B-2003 SINTERED IRON PHOSPHORUS ALLOY TO BE USED WITH FORD WSS-M99P1111-A (REPLACES ESE-M10A85-A)《烧结铁磷合金 与标准FORD WSS-M99P1111-A一起使用 替代ESE-M10A85-A》.pdf

《FORD WSS-M10A85-B-2003 SINTERED IRON PHOSPHORUS ALLOY TO BE USED WITH FORD WSS-M99P1111-A (REPLACES ESE-M10A85-A)《烧结铁磷合金 与标准FORD WSS-M99P1111-A一起使用 替代ESE-M10A85-A》.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M10A85-B-2003 SINTERED IRON PHOSPHORUS ALLOY TO BE USED WITH FORD WSS-M99P1111-A (REPLACES ESE-M10A85-A)《烧结铁磷合金 与标准FORD WSS-M99P1111-A一起使用 替代ESE-M10A85-A》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2003 10 15 Revised Para 3.0 inserted; para 3.1, 3.6 and 4 deleted 1998 05 11 Activated K. Thurgood Printed copies are uncontrolled Copyright 2003, Ford Global Technologies, Inc. Page 1 of 1 SINTERED IRON, PHOSPHORUS ALLOY WSS-M10A85-B 1. SCOPE

2、 The material defined by this specification is a sintered iron base powder metal. 2. APPLICATION This specification was released originally for material used for a magnetic sensor. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform t

3、o the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). Part producers using this material in their products, must use Ford approved materials and must conform to a process control plan which has been approved by STA and/or the relevant Materials Activity. 3.2 CHEMICAL COMPOSITION (Weight %) Total Carbon, max 0.15 Manganese, max 0.60 Phosphorus 0.35 - 0.55 Sulfur, max 0.75 Iron, min 97.0 3.3 DENSITY 7.0 - 7.5 Mg/M3 (ASTM B 311) 3.4 HARDNESS As per Engineering (ASTM E 18) Drawing 3.5 PROOF LOAD As per Engineering Drawing