FORD FLTM BO 061-01-2015 DETERMINING THE TACKINESS OF INTERIOR MATERIALS.pdf

《FORD FLTM BO 061-01-2015 DETERMINING THE TACKINESS OF INTERIOR MATERIALS.pdf》由会员分享，可在线阅读，更多相关《FORD FLTM BO 061-01-2015 DETERMINING THE TACKINESS OF INTERIOR MATERIALS.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 FORD LABORATORY TEST METHOD BO 061-01 Date Action Revisions Rev 00 2015 10 09 Released L. Soreide, NA Controlled document at www.MATS Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 DETERMINING THE TACKINESS OF INTERIOR MATERIALS Application This procedure is used to determine the tackine

2、ss of interior trim materials using environmental exposure. Evaluation 1. Two assessors should evaluate the test specimens. 2. Wash your hands with an unscented mild soap and water before handling any of the test specimens. 3. Remove the test specimens from the conditioning equipment (as required in

3、 the applicable material specification). If evaluating more than one test specimen best results are obtained evaluating no more than four specimens at a time. Note: If the samples are in Xenon stop the chamber during the light cycle. Leave the samples in the holders. 4. Close the conditioning equipm

4、ent door to prevent heat or moisture from escaping. 5. Let the test specimens stand at ambient temperature for no more than 3 minutes before evaluation. 6. Drag your index finger down the center of the test specimen, forward and backward one time evaluating for tackiness. Length of the drag should b

5、e 90% of the test specimen. Note: Pressure will vary depending on the exudation on the test specimen. 7. Visually evaluate the test specimen for exudation or spewing. 8. If any test specimen has a Rating of 1, 2 or 3 wash your hands again before the next evaluation. 9. Repeat with second assessor. R

6、ating Scale Rating 5 No tackiness finger easily slides on the sample. No exudation. Rating 4 No tackiness, the test specimen is rubbery or soft, the sample may grab your finger but if you press on the sample your finger easily moves away. No exudation. Rating 3 Slightly tacky, finger sticks occasion

7、ally along the length of the panel. Exudation is visible on any part of the test specimen. Rating 2 - Tacky, finger sticks, exudation does not migrate to your finger but finger sticks to the sample. Exudation is more visible. Rating 1 Tacky, exudation migrates to your finger. Exudation covers 90% or

8、 greater of the test specimen. FORD LABORATORY TEST METHOD BO 061-01 Copyright 2015, Ford Global Technologies, LLC Page 2 of 2 The test report shall include: A reference to this standard. All necessary details for identifying the test samples. Exposure condition(s). Individual and Average Ratings. Notes regarding special observations.