ETSI TS 100 394-4-14-2000 Terrestrial Trunked Radio (TETRA) Conformance Testing Specification Part 4 Protocol Testing Specification for Direct Mode Operation (DMO) Sub-Part 14 Abst_1.pdf

《ETSI TS 100 394-4-14-2000 Terrestrial Trunked Radio (TETRA) Conformance Testing Specification Part 4 Protocol Testing Specification for Direct Mode Operation (DMO) Sub-Part 14 Abst_1.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 100 394-4-14-2000 Terrestrial Trunked Radio (TETRA) Conformance Testing Specification Part 4 Protocol Testing Specification for Direct Mode Operation (DMO) Sub-Part 14 Abst_1.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、- c PLEASE NOTE This document is normally accompanied by a disk/dish wnen purchased in hardcopy. The dislddisks contain information which would be of no value as a hardcopy document. If you require a copy of the diskldisb, please use the contact information below for your request. When submitting yo

2、ur request, please have the following irzfonnation vuiizble: Your company name/account number Originating orsanisacion Document number USMCanada Enformation Handling Services E-mail Te!: 800-U$-3352 Outside USAiCanada Except the United I(ingdom) Information Handling Services E-mai Te!: i 1-303-790

3、-0600 Technic3 Tz!: (O Fax: (O United Kingdom Indexes Ltd 344) 404409, Custoinet Support 34.1) 40442 I, Ccistoiner Suppori In formation Handing Senices and Teclinicai Indexer - Cortitiziad to Service Excellence ETSI TS 100 394-4-14 1.1.1 (2000-11) Technical Specification Terrestrial Trunked Radio (T

4、ETRA); Conformance testing specification; Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 14: Abstract Test Suite (ATS) for Repeater type 2 2 ETSI TS 1 O0 394-4-1 4 V1.l.l (2000-1 1) Th Reference DTSnETRA-02009-4- 1 4 Keywords ATS, DMO, PIXIT, protocol, radio, testin

5、g, TETRA, TCN ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the presen

6、t document can be downloaded from: http:/iwww. etsi I oq present document may be made available in more than one electronic version or in print. I any cas Df existing perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispu

7、te, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ET

8、SI documents is available at If you find errors in the present document, send your comment to: editor etsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. 8 European Telec

9、ommunications Standards Institute 2000. All rights reserved. ETSI 3 ETSI TS 1 O0 394-4-1 4 V1.l.l (2000-1 1) Contents Intellectual Property Rights 5 Foreword 5 1 2 3 3.1 3.2 3.3 3.4 4 4.1 4.1.1 4.1.2 4.1.3 4.1.4 4.2 4.2.1 4.2.2 4.2.3 4.2.4 4.3 5 5.1 5.1.1 Scope 6 References 6 Definitions and abbrevi

10、ations 7 TETRA definitions 7 TETRA abbreviations 7 IS0 9646 definitions 7 IS0 9646 abbreviations . 7 Abstract Test Method (ATM) 8 Single PCO testing 8 Upper Tester (UT) 8 Point of Control and Observation (PCO) . 9 Multiple PCO testing . 9 Upper Tester (UT) 9 Point of Control and Observation (PCO) .

11、9 Test configurations and use of concurrent TTCN . 10 ATS conventions 11 Lower Tester (LT) 8 Test Coordination Procedures (TCP) 8 Lower Testers (LT) 9 Test Coordination Procedures (TCP) 9 5.1.1.1 5.1.1.2 5.1.1.3 5.1.1.4 5.1.1.5 5.1.1.6 5.1.1.7 5.1.1.8 5.1.1.9 5.1.1.10 5.1.1.11 5.1.1.12 5.1.2 5.1.3 5

12、.1.3.1 5.1.3.2 5.1.3.3 5.2 5.3 Naming conventions 11 Declarations part 11 Test suite type and structured type definitions . 11 Test suite operations definitions 11 Test case selection expression definitions 11 Test suite parameter declarations . 11 Test suite constant declarations . 12 Test suite va

13、riable declarations 12 Test case variable declarations 12 PCO declarations 12 Timer declarations 12 ASP type definitions . 12 PDU type definitions 13 Alias definitions . 13 Constraints part 13 Test case identifier 13 Test step identifier 14 Dynamic part . 13 Default identifier 14 Implementation conv

14、entions 14 TC and TP naming 14 ETSI 4 ETSI TS 1 O0 394-4-1 4 V1.l.l (2000-1 1) Annex A (normative): A.l A.2 ATS for DMO Repeater type 2 (DM-REP2) MAC layer 15 The TTCN Graphical form (TTCN.GR) 15 The TTCN Machine Processable form (TTCN.MP) 15 Annex B (normative): B . 1 B.2 ATS summary 16 Partial PIX

15、IT proforma for TETRA DMO Repeater type 2 MAC layer protocol . 16 Identification summary . 16 B.3 Test laboratory 16 B.4 Client identification 16 B.5 SUT 17 B.6 Protocol layer information 17 B.6.1 Protocol identification . 17 B.6.2 IUT information 17 B.6.2.1 Implicit send events . 17 B.6.2.2 Paramet

16、er values 17 Annex C (normative): C . 1 C.l.l C . 1.2 C.1.3 Testing environment 18 C.1.4 C.1.5 Comments . 19 C.2 C.3 C.4 C.5 Static conformance review report 20 C.6 Test campaign report 20 C.7 Observations . 21 Protocol Conformance Test Report (PCTR) proforma for TETRA DMO Repeater type 2 MAC layer

17、protocol 18 Identification summary . 18 Protocol conformance test report 18 IUT identification 18 Limits and reservation . 19 IUT conformance status 19 Static conformance summary 19 Dynamic conformance summary . 20 Annex D (informative): Bibliography . 22 History . 23 ETSI 5 ETSI TS 1 O0 394-4-1 4 V

18、1.l.l (2000-1 1) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 314: “Inte

19、llectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server -). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches,

20、has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by

21、ETSI Project Terrestrial Trunked Radio (TETRA). The present document consists of the following parts: Part 1: “Radio“; Part 2: Part 4: Part 5: “Security“. “Protocol testing specification for Voice plus Data (V+D)“; “Protocol testing specification for Direct Mode Operation (DMO)“; ETSI 6 ETSI TS 1 O0

22、 394-4-1 4 V1.l.l (2000-1 1) 1 Scope The present document contains the Abstract Test Suite (ATS) to test the TETRA Direct Mode Operation (DMO) Repeater type 2 (DM-REP2) protocol at layer 2, the Medium Access Control (MAC) protocol. The MAC protocol is specified in ETS 300 396-3 lo and in EN 300 396-

23、7 i. The Test Suite Structure (TSS) and Test Purposes (TPs) for this ATS are defined in ETS 300 394-4-12 3. The objective of this test specification is to provide a basis for approval tests for TETRA equipment giving a high probability of air interface inter-operability between different manufacture

24、rs TETRA equipment. The IS0 standard for the methodology of conformance testing, ISO/IEC 9646-1 4, ISO/IEC 9646-2 5, ISO/IEC 9646-3 6 and ISO/IEC 9646-5 7, as well as the ETSI rules for conformance testing, ETS 300 406 8 and ETR 141 9 are used as a basis for the test methodology. Annex A provides th

25、e Tree and Tabular Combined Notation (TTCN) part of this ATS. Annex B provides the partial Protocol Implementation extra Information for Testing (PIXIT) Proforma of this ATS. Annex C provides the Protocol Conformance Test Report (PCTR) Proforma of this ATS. 2 References The following documents conta

26、in provisions which, through reference in this text, constitute provisions of the present documen t. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specif

27、ic reference, the latest version applies. u1 ETSI EN 300 396-7: “Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 7: Type 2 repeater air interface“. ETSI EN 300 396-8-4: “Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operatio

28、n (DMO); Part 8: Protocol Implementation Conformance Statement (PICS) proforma specification; Sub-part 4: Type 2 repeater Air Interface (AI)“. ETSI ETS 300 394-4-12: “Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 4: Protocol testing specification for Direct Mode Operatio

29、n (DMO); Sub-part 12: Test Suite Structure and Test Purposes (TSS Protocol and profile conformance testing specifications; Standardization methodology“. 121 131 141 151 161 171 181 ETSI 7 ETSI TS 1 O0 394-4-1 4 V1.l.l (2000-1 1) ETSI ETR 141: “Methods for Testing and Specification (MTS); Protocol an

30、d profile conformance testing specifications; The Tree and Tabular Combined Notation (TTCN) style guide“. ETSI ETS 300 396-3: “Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 3: Mobile Station to Mobile Station (MS-MS) Air Interface (AI) protocol“. 3 D

31、efinitions and abbreviations 3.1 TETRA d ef i nit ions For the purposes of the present document, the terms and definitions given in EN 300 396-7 i apply. 3.2 TETRA abbreviations For the purposes of the present document the following TETRA abbreviations apply: DM-REP2 MAC Medium Access Control MS Mob

32、ile Station SDS Short Data Service SDU Service Data Unit Direct Mode Repeater Type 2 3.3 IS0 9646 definitions For the purposes of the present document the following ISOAEC 9646 definitions apply: TTCN.GR TTCN.MP PCTR Protocol Conformance Test Report (PCTR proforma) 3.4 IS0 9646 abbreviations For the

33、 purposes of the present document the following ISOAEC 9646-1 4 abbreviations apply: ASP ATM ATS ICs IUT IXIT LT PCO PCTR PDU PICS PIXIT SAP SPyT SUT TC TP TSS TTCN UT Abstract Service Primitive Abstract Test Method Abstract Test Suite Implementation Conformance Statement Implementation Under Test I

34、mplementation extra Information for Testing Lower Tester Point of Control and Observation Protocol Conformance Test Report Protocol Data Unit Protocol Implementation Conformance Statements Protocol Implementation extra Information for Testing Service Access Point Single Party Testing System Under Te

35、st Test Case Test Purpose Test Suite Structure Tree and Tabular Combined Notation Upper Tester ETSI 8 ETSI TS 1 O0 394-4-1 4 V1.l.l (2000-1 1) 4 Abstract Test Method (ATM) This clause describes the ATM used for testing the DM-REP2 MAC layer protocol. The selected method is the remote method, as defi

36、ned in ISO/IEC 9646-2 5, clause 11. This test method has been selected, because: - - - this test method implies no specific requirements from the Implementation Under Test (IUT); the upper Service Access Point (SAP) of the IUT cannot be directly observed; the variety of the possible TETRA implementa

37、tions is a serious technical obstacle for the adoption of a different ATM; - this test method places minimum limitations in the realization of conformance testing. The DM-REP2 MAC protocol defines the operation of a DM-REP2 serving two air interfaces, the master and the slave link. To test the repea

38、ter operation in some cases both interfaces need to be controlled and observed simultaneously. This implies that two testing methods are used: the remote single-party test method (with one PCO) and the remote multiparty test method with two PCOs. 4.1 Single PCO testing The remote Single Party test m

39、ethod with a single PCO is illustrated in figure 1. , PCO GASPS TCP MAC- PDUS lu1 Figure 1 : Remote SPyT test method for TETRA DM-REP2 MAC layer 4.1 .I Lower Tester (LT) A LT is located in a remote TETRA test system. It controls and observes the behaviour of the IUT. 4.1.2 Upper Tester (UT) There is

40、 no explicit UT in the remote test method, but the DM-REP2 MAC layer and the layers above inside the System Under Test (SUT) are used implicitly for testing the MAC layer. 4.1.3 Test Coordination Procedures (TCP) The implicit send events defined by the provider of an implementation in annex B serve

41、the purpose of the TCP. They are used as an input to the IUT communicating with the UT to initiate test events at the DMO MAC layer. ETSI 9 ETSI TS 1 O0 394-4-1 4 V1.l.l (2000-1 1) 4.1.4 Point of Control and Observation (PCO) All test events at the PCO carrying service user data are specified in ter

42、ms of MAC layer PDUs. Only few Abstract Service Primitives (ASPS) are defined for control or observation purposes. The mapping of the MAC PDUs into the physical layer frame structure is left to the test implementation. 4.2 Multiple PCO testing The selected test method is illustrated in figure 2. Tes

43、t system LOWER TESTER CONTROL FUNCTION I JIAC- PDUS Figure 2: Remote multi party test method for TETRA DM-REP2 MAC protocol 4.2.1 Lower Testers (LT) Two LTs: LT1 and LT2 are located in a remote TETRA test system. They observe the behaviour of the IUT. They are controlled and synchronized by the lowe

44、r tester control function. 4.2.2 Upper Tester (UT) There is no explicit UT in the remote test method, but the layers above inside the System Under Test (SUT) are used implicitly for testing the DM-REP2 MAC layer. 4.2.3 Test Coordination Procedures (TCP) The implicit send events defined by the provid

45、er of an implementation in annex B serve the purpose of the TCP. They are used as an input to the IUT communicating with the UT to initiate test events at the MAC protocol layer. 4.2.4 Point of Control and Observation (PCO) The PCOs are located inside the protocol. ETSI 10 ETSI TS 1 O0 394-4-1 4 V1.

46、l.l (2000-1 1) All test events at the PCOs carrying service user data are specified in terms of MAC PDUs. The mapping of the PDUs to possible physical layer service primitives is left to the test implementation. 4.3 Test configurations and use of concurrent TTCN As this ATS covers both single-party

47、testing using non-concurrent TTCN, and multi-party testing using concurrent TTCN, the notation chosen for the complete ATS is concurrent TTCN syntax. Therefore, tests components are defined to describe the two configurations: the “single-party“ configuration and the “multi-party“ configuration, as s

48、hown in figures 3 and 4. The single-party configuration is used in case of single-party testing, i.e. for testing a single air interface only, a master link or slave link interface. In this case only a single test component is needed. It is the Main Test Component (MTC) MTC-SINGLE connected to the I

49、UT via the PCO LMAC. MTC-S I NG LE LMAC I UT Figure 3: Single-party configuration The Multi-party configuration is used when testing the DM-REP2 MAC layer protocol involves both the master link and slave link interface. In this case, three test components are needed. These are the Main Test Component (MTC) MTC-REP2, and the two Parallel Test Components (PTCs) PTCMSML and PTCMS-SL. The two PTCs are connected to the MTC via the coordination points CP-ML and CP-SL. The PTCMSML and PTCMS-SL are further connected to the IUT vi