ETSI ES 202 388-4-2005 Open Service Access (OSA) Application Programming Interface (API) Test Suite Structure and Test Purposes (TSS&TP) Part 4 Call control SCF《开放业务接入(OSA) 应用编程接口(_1.pdf

《ETSI ES 202 388-4-2005 Open Service Access (OSA) Application Programming Interface (API) Test Suite Structure and Test Purposes (TSS&TP) Part 4 Call control SCF《开放业务接入(OSA) 应用编程接口(_1.pdf》由会员分享，可在线阅读，更多相关《ETSI ES 202 388-4-2005 Open Service Access (OSA) Application Programming Interface (API) Test Suite Structure and Test Purposes (TSS&TP) Part 4 Call control SCF《开放业务接入(OSA) 应用编程接口(_1.pdf（531页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI ES 202 388-4 V1.1.1 (2005-03)ETSI Standard Open Service Access (OSA);Application Programming Interface (API);Test Suite Structure and Test Purposes (TSSPart 4: Call control SCF(Parlay 4)ETSI ETSI ES 202 388-4 V1.1.1 (2005-03) 2 Reference DES/TISPAN-06004-04-OSA Keywords API, OSA, TSS Essential

2、, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been

3、 carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This ETSI Standard (ES) has been produced by ETSI Technical Com

4、mittee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). The present document is part 4 of a multi-part deliverable. Full details of the entire series can be found in part 1 10. To evaluate conformance of a particular implementation, it is necessary t

5、o have a set of test purposes to evaluate the dynamic behaviour of the Implementation Under Test (IUT). The specification containing those test purposes is called a Test Suite Structure and Test Purposes (TSS Application Programming Interface (API); Part 4: Call Control; Sub-part 1: Call Control Com

6、mon Definitions (Parlay 4)“. 2 ETSI ES 202 915-4-2: “Open Service Access (OSA); Application Programming Interface (API); Part 4: Call Control; Sub-part 2: Generic Call Control SCF (Parlay 4)“. 3 ETSI ES 202 915-4-3: “Open Service Access (OSA); Application Programming Interface (API); Part 4: Call Co

7、ntrol; Sub-part 3: Multi-Party Call Control SCF (Parlay 4)“. 4 ETSI ES 202 915-4-4: “Open Service Access (OSA); Application Programming Interface (API); Part 4: Call Control; Sub-part 4: Multi-Media Call Control SCF (Parlay 4)“. 5 ETSI ES 202 915-4-5: “Open Service Access (OSA); Application Programm

8、ing Interface (API); Part 4: Call Control; Sub-part 5: Conference Call Control SCF (Parlay 4)“. 6 ETSI ES 202 363: “Open Service Access (OSA); Application Programming Interface (API); Implementation Conformance Statement (ICS) proforma specification; (Parlay 4)“. 7 ISO/IEC 9646-1: “Information techn

9、ology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 8 ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite specification“. 9 ETSI ETS 300 406:

10、 “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 10 ETSI ES 202 388-1: “Open Service Access (OSA); Application Programming Interface (API); Test Suite Structure and Test Purposes (TSS Part 1: Overview (Parlay 4)“. E

11、TSI ETSI ES 202 388-4 V1.1.1 (2005-03) 8 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ES 202 915-4-1 1, ES 202 915-4-2 2, ES 202 915-4-3 3, ES 202 915-4-4 4, ES 202 915-4-5 5, ISO/IEC 9646-1 7, ISO/IEC 9646-2 8 and the f

12、ollowing apply: abstract test case: Refer to ISO/IEC 9646-1 7. Abstract Test Method (ATM): Refer to ISO/IEC 9646-1 7. Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 7. Implementation Conformance Statement (ICS): Refer to ISO/IEC 9646-1 7. ICS proforma: Refer to ISO/IEC 9646-1 7. Implementation U

13、nder Test (IUT): Refer to ISO/IEC 9646-1 7. Implementation eXtra Information for Testing (IXIT): Refer to ISO/IEC 9646-1 7. IXIT proforma: Refer to ISO/IEC 9646-1 7. Lower Tester (LT): Refer to ISO/IEC 9646-1 7. Test Purpose (TP): Refer to ISO/IEC 9646-1 7. 3.2 Abbreviations For the purposes of the

14、present document, the following abbreviations apply: API Application Programming Interface ATM Abstract Test Method ATS Abstract Test Suite CC Call Control CCC Conference Call Control service GCC Generic Call Control service ICS Implementation Conformance Statement IUT Implementation Under Test IXIT

15、 Implementation eXtra Information for Testing LT Lower Tester MMCC MultiMedia Call Control service MPCC MultiParty Call Control service OSA Open Service Access TP Test Purpose TSS Test Suite Structure 4 Test Suite Structure (TSS) - SCF Call Control (CC): Generic Call Control Service (GCC). MultiPart

16、y Call Control Service (MPCC). MultiMedia Call Control Service (MMCC). Conference Call Control Service (CCC). ETSI ETSI ES 202 388-4 V1.1.1 (2005-03) 9 5 Test Purposes (TP) - SCF 5.1 Introduction For each test requirement a TP is defined. 5.1.1 TP naming convention TPs are numbered, starting at 01,

17、within each group. Groups are organized according to the TSS. Additional references are added to identify the actual test suite (see table 1). Table 1: TP identifier naming convention scheme Identifier: _ = SCG name: “CC“ for Call Control part of Call Control SCF = group number: field representing t

18、he group reference according to TSS = sequential number: (01-99) 5.1.2 Source of TP definition The TPs are based on ES 202 915-4-1 1, ES 202 915-4-2 2, ES 202 915-4-3 3, ES 202 915-4-4 4 and ES 202 915-4-5 5. 5.1.3 Test strategy As the base standards ES 202 915-4-1 1, ES 202 915-4-2 2, ES 202 915-4-

19、3 3, ES 202 915-4-4 4 and ES 202 915-4-5 5 contain no explicit requirements for testing, the TPs were generated as a result of an analysis of the base standards and the ICS specification ES 202 363 6. The TPs are only based on conformance requirements related to the externally observable behaviour o

20、f the IUT and are limited to conceivable situations to which a real implementation is likely to be faced (see ETS 300 406 9). 5.2 TPs for the Call Control SCF All ICS items referred to in this clause are as specified in ES 202 363 6 unless indicated otherwise by another numbered reference. All param

21、eters specified in method calls are valid unless specified. The procedures to trigger the SCF to call methods in the application are dependant on the underlying network architecture and are out of the scope of the present document. Those method calls are preceded by the words “Triggered action“. 5.2

22、.1 Generic Call Control The TPs in this clause are based on ES 202 915-4-2 2. ETSI ETSI ES 202 388-4 V1.1.1 (2005-03) 105.2.1.1 IpCallControlManager 5.2.1.1.1 Mandatory, valid behaviour Test GCC_IPCALLCONTROLMANAGER _01 Summary: IpCallControlManager, all mandatory methods, successful Reference: ES 2

23、02 915-4-2 2, clause 6.1 Condition: createCall method is supported. Test Sequence: 1. Method call setCallback() on IpCallControlManager Parameters: valid, not null, value of appInterface parameter Check: no exception is returned 2. Method call createCall() Parameters: valid appCall Check: valid valu

24、e of TpCallIdentifier is returned : IpCallControlManager: (Logical View:IpAppLogic)2. createCall(appCall)1. setCallback(appInterface)callReferenceETSI ETSI ES 202 388-4 V1.1.1 (2005-03) 11Test GCC_IPCALLCONTROLMANAGER _02 Summary: IpCallControlManager, all mandatory methods, successful Reference: ES

25、 202 915-4-2 2, clause 6.1 Condition: enableCallNotification method is supported. Test Sequence: 1. Method call enableCallNotification() Parameters: appCallControlManager with valid, not null, value, valid eventCriteria Check: valid value of TpAssignmentID is returned 2 Triggered action: cause IUT t

26、o call callEventNotify()method on the testers (Application) IpAppCallControlManager interface Parameters: valid callReference, valid eventInfo, assignmentID returned in 1 3. Method call disableCallNotification() Parameters: assignmentID returned in 1 Check: no exception is returned : IpCallControlMa

27、nager: (Logical View:IpAppLogic)3. disableCallNotification(assignmentID)1. enableCallNotification(appCallControlManager, eventCriteria): IpAppCallControlManager2. callEventNotify(callReference, eventInfo, assignmentID)assignmentIDappCallETSI ETSI ES 202 388-4 V1.1.1 (2005-03) 12Test GCC_IPCALLCONTRO

28、LMANAGER _03 Summary: IpCallControlManager, all mandatory methods, successful Reference: ES 202 915-4-2 2, clause 6.1 Condition: enableCallNotification method is supported. Test Sequence: 1. Method call setCallback() on IpCallControlManager Parameters: valid, non-null, value of appInterface paramete

29、r Check: no exception is returned 2. Method call enableCallNotification() Parameters: appCallControlManager with null, value, valid eventCriteria Check: valid value of TpAssignmentID is returned 3. Triggered action: cause IUT to call callEventNotify()method on the testers (Application) IpAppCallCont

30、rolManager interface. Parameters: valid callReference, valid eventInfo, assignmentID returned in 2. 4. Method call disableCallNotification() Parameters: assignmentID returned in 2. Check: no exception is returned : IpCallControlManager: (Logical View:IpAppLogic)4. disableCallNotification(assignmentI

31、D)1. changeCallNotification(assignmentID, eventCriteria): IpAppCallControlManager2. enableCallNotification(appCallControlManager, eventCriteria)3. callEventNotify(callReference, eventInfo, assignmentID)assignmentIDappCallsetCallback(appInterface)ETSI ETSI ES 202 388-4 V1.1.1 (2005-03) 135.2.1.1.2 Ma

32、ndatory, invalid behaviour Test GCC_IPCALLCONTROLMANAGER _04 Summary: IpCallControlManager, enableCallNotification, P_INVALID_CRITERIA Reference: ES 202 915-4-2 2, clause 6.1 Condition: enableCallNotification method is supported. Test Sequence: 1. Method call enableCallNotification() Parameters: val

33、id appCallControlManager, invalid eventCriteria but with a valid event type Check: P_INVALID_CRITERIA is returned. : IpCallControlManager: (Logical View:IpAppLogic)1. enableCallNotification(appCallControlManager, invalid eventCriteria)P_INVALID_CRITERIATest GCC_IPCALLCONTROLMANAGER _05 Summary: IpCa

34、llControlManager, enableCallNotification, P_INVALID_INTERFACE_TYPE Reference: ES 202 915-4-2 2, clause 6.1 Condition: enableCallNotification method is supported. Test Sequence: 1. Method call enableCallNotification() Parameters: invalid appCallControlManager, valid eventCriteria Check: P_INVALID_INT

35、ERFACE_TYPE is returned : IpCallControlManager: (Logical View:IpAppLogic)1. enableCallNotification(invalid appCallControlManager, eventCriteria)P_INVALID_INTERFACE_TYPEETSI ETSI ES 202 388-4 V1.1.1 (2005-03) 14Test GCC_IPCALLCONTROLMANAGER _06 Summary: IpCallControlManager, disableCallNotification,

36、P_INVALID_ASSIGNMENT_ID Reference: ES 202 915-4-2 2, clause 6.1 Condition: disableCallNotification is supported. Test Sequence: 1. Method call enableCallNotification() Parameters: appCallControlManager with valid, not null, value, valid eventCriteria Check: valid value of TpAssignmentID is returned

37、2. Method call disableCallNotification() Parameters: invalid assignmentID Check: P_INVALID_ASSIGNMENT_ID is returned : IpCallControlManager: (Logical View:IpAppLogic)2. disableCallNotification(invalid assignmentID)P_INVALID_ASSIGNMENT_ID1. enableCallNotification(appCallControlManager, eventCriteria)

38、Test GCC_IPCALLCONTROLMANAGER _07 Summary: IpCallControlManager, createCall, P_INVALID_INTERFACE_TYPE Reference: ES 202 915-4-2 2, clause 6.1 Condition: createCall method is supported. Test Sequence: 1. Method call createCall() Parameters: invalid value of appCall Check: P_INVALID_INTERFACE_TYPE is

39、returned ETSI ETSI ES 202 388-4 V1.1.1 (2005-03) 15: IpCallControlManager: (Logical View:IpAppLogic)1. createCall(invalid appCall)P_INVALID_INTERFACE_TYPE5.2.1.1.3 Optional, valid behaviour Test GCC_IPCALLCONTROLMANAGER _08 Summary: IpCallControlManager, getCriteria, successful Reference: ES 202 915

40、-4-2 2, clause 6.1 Condition: enableCallNotification and getCriteria methods are supported. Test Sequence: 1. Method call setCallback() on IpCallControlManager Parameters: valid, non-null, value of appInterface parameter Check: no exception is returned 2. Method call enableCallNotification() Paramet

41、ers: appCallControlManager with null value, valid eventCriteria Check: valid value of TpAssignmentID is returned 3. Method call getCriteria() Parameters: None Check: valid value of TpCallEventCriteriaResultSet is returned where eventCriteria given in 1. is included as a value of this TpCallEventCrit

42、eriaResultSet 4. Method call disableCallNotification() Parameters: assignmentID returned in 1. Check: no exception is returned ETSI ETSI ES 202 388-4 V1.1.1 (2005-03) 16: IpCallControlManager: (Logical View:IpAppLogic)4. disableCallNotification(assignmentID)1. setCallback(appInterface)2. enableCallN

43、otification(appCallControlManager, eventCriteria)assignmentID3. getCriteria( )eventCriteriaTest GCC_IPCALLCONTROLMANAGER _09 Summary: IpCallControlManager, changeCallNotification, successful Reference: ES 202 915-4-2 2 clause 6.1 Condition: enableCallNotification, getCriteria and changeCallNotificat

44、ion methods are supported. Preamble: Application has a reference interface used for callbacks. Test Sequence: 1. Method call enableCallNotification() Parameters: appCallControlManager with valid, not null, value, valid eventCriteria Check: valid value of TpAssignmentID is returned 2. Method call get

45、Criteria() Parameters: None Check: valid value of TpCallEventCriteriaResultSet is returned where eventCriteria given in 1. is included as a value of this TpCallEventCriteriaResultSet 3. Method call changeCallNotification() Parameters: assignmentID returned in 1., valid eventCriteria different from t

46、his given in 1. Check: no exception is returned 4. Method call getCriteria() Parameters: None Check: valid value of TpCallEventCriteriaResultSet is returned where eventCriteria given in 3. is included as a value of this TpCallEventCriteriaResultSet 5. Triggered action: cause IUT to call callEventNot

47、ify() method on the testers (Application) IpAppCallControlManager interface. Parameters: valid callReference, valid eventInfo, assignmentID returned in 1. ETSI ETSI ES 202 388-4 V1.1.1 (2005-03) 176. Method call disableCallNotification() Parameters: assignmentID returned in 1. Check: no exception is

48、 returned : (Logical View:IpAppLogic): IpCallControlManager3. changeCallNotification(assignmentID, eventCriteria)4. getCriteria( )eventCriteria: IpAppCallControlManager5. callEventNotify(callReference, eventInfo, assignmentID)appCall1. enableCallNotification(appCallControlManager, eventCriteria)assi

49、gnmentID6. disableCallNotification(assignmentID)2. getCriteria( )eventCriteriaETSI ETSI ES 202 388-4 V1.1.1 (2005-03) 18Test GCC_IPCALLCONTROLMANAGER _10 Summary: IpCallControlManager, all methods, successful Reference: ES 202 915-4-2 2 clause 6.1 Condition: enableCallNotification, setCallLoadControl, callOverLoadEncountered and callOverLoadCeased methods are supported. Test Sequence: 1. Method call enableCallNotification() Parameters: appCallControlManager with valid, no