ETSI EN 301 598-2018 White Space Devices (WSD) Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band Harmonised Standard covering the essential requirements_1.pdf

《ETSI EN 301 598-2018 White Space Devices (WSD) Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band Harmonised Standard covering the essential requirements_1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 301 598-2018 White Space Devices (WSD) Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band Harmonised Standard covering the essential requirements_1.pdf（77页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 301 598 V2.1.1 (2018-01) White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 598 V2.1.1 (2018-01

2、) 2 Reference REN/BRAN-60019 Keywords access, broadband, CRS, FWA, LAN, M2M, mobile, radio ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfectur

3、e de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be mod

4、ified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.

5、Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please s

6、end your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permissi

7、on of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered

8、for the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI

9、 EN 301 598 V2.1.1 (2018-01) 3 Contents Intellectual Property Rights 7g3Foreword . 7g3Modal verbs terminology 7g3Introduction 8g31 Scope 9g32 References 9g32.1 Normative references . 9g32.2 Informative references 9g33 Definitions, symbols and abbreviations . 10g33.1 Definitions 10g33.2 Symbols 12g33

10、.3 Abbreviations . 13g34 Technical requirements specifications . 13g34.1 Environmental profile . 13g34.2 Conformance requirements 14g34.2.1 Meeting the Directive requirements 14g34.2.2 Equipment types . 14g34.2.2.1 Definition 14g34.2.2.2 Equipment Type A 14g34.2.2.3 Equipment Type B 14g34.2.3 Nomina

11、l Channel Bandwidth and Total Nominal Channel Bandwidth 14g34.2.3.1 Definitions . 14g34.2.3.2 Requirements 14g34.2.3.3 Conformance . 15g34.2.4 RF power and RF power spectral density . 15g34.2.4.1 Definitions . 15g34.2.4.1.1 RF power . 15g34.2.4.1.2 RF power spectral density . 15g34.2.4.2 Limits 15g3

12、4.2.4.3 Conformance . 15g34.2.5 Transmitter unwanted emissions . 15g34.2.5.1 Transmitter unwanted emissions outside the 470 MHz to 790 MHz band 15g34.2.5.1.1 Definition. 15g34.2.5.1.2 Limits 16g34.2.5.1.3 Conformance . 16g34.2.5.2 Transmitter unwanted emissions within the 470 MHz to 790 MHz band . 1

13、6g34.2.5.2.1 Definition. 16g34.2.5.2.2 Limits 16g34.2.5.2.3 Conformance . 16g34.2.6 Transmitter Reverse Intermodulation Attenuation 17g34.2.6.1 Definition 17g34.2.6.2 Limits 17g34.2.6.3 Conformance . 17g34.2.7 Control and monitoring . 17g34.2.7.1 Control and monitoring mechanisms 17g34.2.7.2 TVWSDB

14、identification 18g34.2.7.2.1 Applicability 18g34.2.7.2.2 Definition. 18g34.2.7.2.3 Requirements . 18g34.2.7.2.4 Conformance . 18g34.2.7.3 Data exchange and compliance with parameters . 18g34.2.7.3.1 Applicability 18g34.2.7.3.2 Device parameters, operational parameters and channel usage . 18g34.2.7.3

15、.3 Transmission in compliance with parameters 21g3ETSI ETSI EN 301 598 V2.1.1 (2018-01) 4 4.2.7.3.4 Reporting of device parameters . 22g34.2.7.3.5 Reporting of channel usage parameters . 22g34.2.7.3.6 Functionality of a master TVWSD to support slave TVWSDs . 22g34.2.7.3.7 Conformance . 23g34.2.7.4 M

16、aster TVWSD update . 23g34.2.7.4.1 Definition. 23g34.2.7.4.2 Requirements . 23g34.2.7.4.3 Conformance . 24g34.2.7.5 Slave TVWSD update . 24g34.2.7.5.1 Applicability 24g34.2.7.5.2 Definition. 24g34.2.7.5.3 Requirements . 24g34.2.7.5.4 Conformance . 24g34.2.8 Receiver Blocking 24g34.2.8.1 Applicabilit

17、y 24g34.2.8.2 Definition 25g34.2.8.3 Performance Criteria . 25g34.2.8.4 Limits 25g34.2.8.5 Conformance . 25g34.2.9 Receiver spurious emissions . 25g34.2.9.1 Definition 25g34.2.9.2 Limits 25g34.2.9.3 Conformance . 26g34.2.10 Geo-Location capability . 26g34.2.10.1 Definition 26g34.2.10.2 Requirements

18、26g34.2.10.3 Conformance . 26g34.2.11 Software, Firmware and User Access Restrictions . 26g34.2.11.1 Definition 26g34.2.11.2 Requirement 27g34.2.11.3 Conformance . 27g34.2.12 Security . 27g34.2.12.1 Applicability 27g34.2.12.2 Definition 27g34.2.12.3 Requirements 27g34.2.12.4 Conformance . 28g35 Test

19、ing for compliance with technical requirements 28g35.1 Introduction 28g35.2 Conditions for testing . 28g35.2.1 Normal and extreme test conditions 28g35.2.2 Antennas . 28g35.2.3 Transmit operating modes 28g35.2.4 Requirements for the test modulation . 29g35.2.5 Communication between test TVWSDB, mast

20、er and slave UUT. 29g35.2.6 Operational Parameter set . 30g35.3 Interpretation of measurement results 30g35.4 Essential test suites . 31g35.4.1 Product Information 31g35.4.2 RF output power . 32g35.4.2.1 Test conditions 32g35.4.2.2 Test method . 32g35.4.2.2.1 Conducted measurements 32g35.4.2.2.2 Rad

21、iated measurements . 33g35.4.3 Power Spectral Density and Transmitter unwanted emissions within the 470 MHz to 790 MHz band . 34g35.4.3.1 Test conditions 34g35.4.3.2 Test method . 34g35.4.3.2.1 Conducted measurement 34g35.4.3.2.2 Radiated measurement . 36g35.4.4 Transmitter unwanted emissions outsid

22、e the 470 MHz to 790 MHz bands 36g35.4.4.1 Purpose 36g35.4.4.2 Test conditions 37g3ETSI ETSI EN 301 598 V2.1.1 (2018-01) 5 5.4.4.3 Test method . 37g35.4.4.3.1 Conducted measurements 37g35.4.4.3.2 Radiated measurements . 39g35.4.5 Transmitter Intermodulation . 39g35.4.5.1 Objective and Measurement Ar

23、rangement 39g35.4.5.2 Test Method 39g35.4.6 Master TVWSD update 40g35.4.6.1 Introduction and Test conditions . 40g35.4.6.2 Test method . 40g35.4.7 Lost connection between the master TVWSD and the TVWSDB 41g35.4.7.1 Test conditions 41g35.4.7.2 Test method . 42g35.4.8 Slave TVWSD update - specific par

24、ameters invalidated 42g35.4.8.1 Test conditions 42g35.4.8.2 Test method . 42g35.4.9 Slave TVWSD update - loss of communication with master TVWSD 43g35.4.9.1 Test conditions 43g35.4.9.2 Test method . 43g35.4.10 Receiver Blocking 43g35.4.10.1 Test conditions 43g35.4.10.2 Test Method 44g35.4.10.2.1 Con

25、ducted measurements 44g35.4.11 Receiver spurious emission 45g35.4.11.1 Purpose 45g35.4.11.2 Test conditions 45g35.4.11.3 Test method . 45g35.4.11.3.1 Conducted measurements 45g35.3.11.3.2 Radiated measurements . 46g35.4.12 Control and monitoring functions . 47g35.4.12.1 TVWSDB identification 47g35.4

26、.12.1.1 Test condition 47g35.4.12.1.2 Test method 1 48g35.4.12.1.3 Test method 2 48g35.4.12.1.4 Test method 3 48g35.4.12.1.5 Test method 4 49g35.4.12.1.6 Test method 5 49g35.4.12.2 Transmission in compliance with parameters, provision of device parameters, provision of channel usage parameters and m

27、aster TVWSD functionality in support of slave TVWSDs 50g35.4.12.2.1 Test condition 50g35.4.12.2.2 Test method 1 50g35.4.12.2.3 Test method 2 51g35.4.12.2.4 Test method 3 51g35.4.12.2.5 Test method 4 52g35.4.12.2.6 Test method 5 52g35.4.12.2.7 Test method 6 53g35.4.13 Geo-location capability . 53g35.

28、4.13.1 Purpose 53g35.4.13.2 Test conditions 53g35.4.13.3 Test method . 54g3Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 56g3Annex B (normative): Test sites and arrangements for radiated measurement 58g3B.1 Introduction 58g3

29、B.2 Radiation test sites 58g3B.2.1 Open Area Test Site (OATS) . 58g3B.2.2 Semi Anechoic Room . 59g3B.2.3 Fully Anechoic Room (FAR) . 60g3B.2.4 Measurement Distance . 61g3ETSI ETSI EN 301 598 V2.1.1 (2018-01) 6 B.3 Antennas . 62g3B.3.1 Antenna types . 62g3B.3.2 Measurement antenna . 62g3B.3.3 Substit

30、ution antenna . 62g3B.4 Test fixture . 63g3B.4.1 Conducted measurements and use of test fixture . 63g3B.4.2 Description of the test fixture . 63g3B.4.3 Using the test fixture for relative measurements 63g3B.5 Guidance on the use of radiation test sites . 63g3B.5.1 Test procedures, equipment and veri

31、fication 63g3B.5.2 Power supplies for the battery powered UUT 64g3B.5.3 Site preparation 64g3B.6 Coupling of signals . 64g3B.6.1 General . 64g3B.6.2 Data Signals 65g3Annex C (normative): General description of measurement . 66g3C.1 Introduction 66g3C.2 Conducted measurements . 66g3C.3 Radiated measu

32、rements 66g3C.4 Substitution measurement 67g3Annex D: Void 68g3Annex E (informative): Nominal Channel Bandwidth and Total Bandwidth 69g3Annex F (informative): Application form for testing 71g3F.1 Introduction 71g3F.2 Information as required by ETSI EN 301 598 V2.1.1 71g3Annex G (informative): Biblio

33、graphy . 75g3Annex H (informative): Change History 76g3History 77g3ETSI ETSI EN 301 598 V2.1.1 (2018-01) 7 Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs

34、, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are avai

35、lable on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which ar

36、e, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conve

37、ys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Harmonised European Standard (EN) has been produced by

38、 ETSI Technical Committee Broadband Radio Access Networks (BRAN). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.13 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of th

39、e laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.3. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document gi

40、ven in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. National transposition dates Date of adoption of this EN: 8 January 2018 Date of latest anno

41、uncement of this EN (doa): 30 April 2018 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 October 2018 Date of withdrawal of any conflicting National Standard (dow): 31 October 2019 Modal verbs terminology In the present document “shall“, “shall not“, “should

42、“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI

43、 ETSI EN 301 598 V2.1.1 (2018-01) 8 Introduction The present document covers TV band high performance wireless access systems (WAS) including RLAN equipment which is used in wireless local area networks. Such networks provide high speed data communications in between devices connected to the wireles

44、s infrastructure. The present document also covers ad-hoc networking where devices communicate directly with each other, without the use of a wireless infrastructure. The methods and principles used in the present document for the operation of TV White Space devices in the band 470 MHz to 790 MHz ar

45、e taken from the ECC Report 186 i.6, which explains the regulatory principles under which it is envisaged such devices will be permitted to operate in Europe. This approach is also explained in further detail in chapter 9 of “Dynamic White Space Spectrum Access“ i.12. A requirement to facilitate coe

46、xistence between TVWSDs is not considered essential with respect to compliance with article 3.2 of Directive 2014/53/EU i.3 and therefore is not included in the current version of the present document. This may change in the future, resulting in the inclusion of mitigation techniques in a revision o

47、f the present document, to improve the coexistence among TVWSDs, if considered essential in order to comply with article 3.2 of Directive 2014/53/EU i.3. ETSI ETSI EN 301 598 V2.1.1 (2018-01) 9 1 Scope The present document specifies technical characteristics and methods of measurements for TV white

48、space devices (TVWSDs) controlled by a TV white space database (TVWSDB) and which operate in the TV broadcast band 470 MHz to 790 MHz. The present document applies to the following radio equipment types: 1) Master TV white space device (TVWSD) 2) Slave TV white space device (TVWSD) The present docum

49、ent applies to TVWSDs with integral, dedicated or external antennas, where TVWSDs using external antennas are intended only for fixed use. The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU i.3 under the conditions identified in annex A. 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number or version number. Only the cited version applies. Referenced documents which are not found to be publicly available in the expected location might be found at https:/