EN ISO TR 52019-2-2017 en Energy performance of buildings - Hygrothermal performance of building components and building elements - Part 2 Explanation and justification.pdf

《EN ISO TR 52019-2-2017 en Energy performance of buildings - Hygrothermal performance of building components and building elements - Part 2 Explanation and justification.pdf》由会员分享，可在线阅读，更多相关《EN ISO TR 52019-2-2017 en Energy performance of buildings - Hygrothermal performance of building components and building elements - Part 2 Explanation and justification.pdf（72页珍藏版）》请在麦多课文档分享上搜索。

1、Energy performance of buildings - Hygrothermal performance of building components and building elementsPart 2: Explanation and justification (ISO/TR 52019-2:2017)PD CEN ISO/TR 52019-2:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis Published

2、 Document is the UK implementation of CEN ISO/TR 52019-2:2017. It is identical to ISO/TR 52019-2:2017.The UK participation in its preparation was entrusted to Technical Committee B/540/2, Building performance - Moisture.A list of organizations represented on this committee can be obtained on request

3、 to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 91586 4ICS 91.120.10Compliance with a British Sta

4、ndard cannot confer immunity from legal obligations.This Published Document was published under the authority of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedPUBLISHED DOCUMENTPD CEN ISO/TR 52019-2:2017TECHNICAL REPOR

5、TRAPPORT TECHNIQUETECHNISCHER BERICHTCEN ISO/TR 52019-2July 2017ICS 91.120.10EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN Ref. No. CEN ISO/TR 52019-2:2017: EAll rights of ex

6、ploitation in any form and by any means reserved worldwide for CEN national MembersEnergy performance of buildings - Hygrothermal performance of building components and building elements - Part 2: Explanation and justification (ISO/TR 52019-2:2017)Performance nergtique des btiments - Performances hy

7、grothermiques des composants et parois de btiments - Partie 2: Explication et justification (ISO/TR 52019-2:2017)This Technical Report was approved by CEN on 24 February 2017. It has been drawn up by the Technical Committee CEN/TC 89.CEN members are the national standards bodies of Austria, Belgium,

8、 Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Sw

9、itzerland, Turkey and United Kingdom.English VersionISO 52019-2:2017(E)Foreword vIntroduction vi1 Scope .12 Normative references 13 Terms and definitions .14 Symbols and subscripts .25 Description of the methods .25.1 Outputs 25.2 General description . 26 ISO 6946 37 ISO 10211 48 ISO 13370 48.1 Gene

10、ral .48.2 Thermal properties of the ground .48.3 The influence of flowing ground water 48.4 Application to dynamic simulation programmes 48.5 Embedded heating or cooling systems 48.6 Cold stores 49 ISO 13786 410 ISO 13789 511 ISO 14683 5Annex A (informative) ISO 13370: Thermal properties of the grou

11、nd 6Annex B (informative) ISO 13370: The influence of flowing ground water 8Annex C (informative) ISO 13370: Application to dynamic simulation programmes .10Annex D (informative) ISO 13370: Slab-on-ground floor with an embedded heating or cooling system 18Annex E (informative) ISO 13370: Cold stores

12、 .19Annex F (informative) ISO 13370: Worked examples .20Annex G (informative) ISO 13786: Principle of the method and examples of applications 29Annex H (informative) ISO 13786: Information for computer programming .33Annex I (informative) ISO 13786: Examples 35Annex J (informative) ISO 13789: Inform

13、ation on type of dimensions 38Annex K (informative) ISO 13789: Ventilation airflow rates 40Annex L (informative) ISO 14683: Example of the use of default values of linear thermal transmittance in calculating the heat transfer coefficient 45Annex M (informative) Detailed worked examples for ISO 6946,

14、 ISO 13370 and ISO 13789 49Bibliography 58ii ISO 2017 All rights reservedContents PagePD CEN ISO/TR 52019-2:2017ISO 52019-2:2017(E)European forewordThis document (CEN ISO/TR 52019-2:2017) has been prepared by Technical Committee ISO/TC 163 “Thermal performance and energy use in the built environment

15、“ in collaboration with Technical Committee CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of which is held by SIS.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held respons

16、ible for identifying any or all such patent rights.This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association.This document is part of the set of standards and accompanying technical reports on the energy performance of buildings a

17、nd has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association (Mandate M/480, see reference EF3 below).Directive 2010/31/EU recasting the Directive 2002/91/EC on energy performance of buildings (EPBD, EF4) promotes the improvement of the energy

18、performance of buildings within the European Union, taking into account all types of energy uses (heating, lighting, cooling, air conditioning, ventilation) and outdoor climatic and local conditions, as well as indoor climate requirements and cost effectiveness (Article 1).The directive requires Mem

19、ber States to adopt measures and tools to achieve the prudent and rational use of energy resources. In order to achieve those goals, the EPBD requires increasing energy efficiency and the enhanced use of renewable energies in both new and existing buildings. One tool for this is the application by M

20、ember States of minimum requirements on the energy performance of new buildings and for existing buildings that are subject to major renovation, as well as for minimum performance requirements for the building envelope if energy-relevant parts are replaced or retrofitted. Other tools are energy cert

21、ification of buildings, inspection of boilers and air-conditioning systems.The use of European standards increases the accessibility, transparency and objectivity of the energy performance assessment in the Member States facilitating the comparison of best practices and supporting the internal marke

22、t for construction products. The use of EPB standards for calculating energy performance, as well as for energy performance certification and the inspection of heating systems and boilers, ventilation and air-conditioning systems will reduce costs compared to developing different standards at nation

23、al level.The first mandate to CEN to develop a set of CEN EPBD standards (M/343, EF1), to support the first edition of the EPBD (EF2) resulted in the successful publication of all EPBD related CEN standards in 2007-2008. Mandate M/480 was issued to review the mandate M/343 as the recast of the EPBD

24、raised the need to revisit the standards and reformulate and add standards so that they become on the one hand unambiguous and compatible, and on the other hand a clear and explicit overview of the choices, boundary conditions and input data that need to be defined at national or regional level. Suc

25、h national or regional choices remain necessary, due to differences in climate, culture and building tradition, policy and legal frameworks. Consequently, the set of CEN EPBD standards published in 2007-2008 had to be improved and expanded on the basis of the recast of the EPBD. The EPB standards ar

26、e flexible enough to allow for necessary national and regional differentiation and facilitate Member States implementation and the setting of requirements by the Member States.Further target groups are users of the voluntary common European Union certification scheme for the energy performance of no

27、n-residential buildings (EPBD article 11.9) and any other regional (e.g. pan European) parties wanting to motivate their assumptions by classifying the building energy performance for a dedicated building stock.References: ISO 2017 All rights reserved iiiPD CEN ISO/TR 52019-2:2017ISO 52019-2:2017(E)

28、EF1 EPBD, Directive 2002/91/EC of the European Parliament and of the Council of 16 December 2002 on the energy performance of buildingsEF2 EPBD Mandate M/343, Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performanc

29、e of buildings and estimating the environmental impact, in accordance with the terms set forth in Directive 2002/91/EC , 30 January 2004EF3 Mandate M/480, Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of

30、 buildings and promoting the energy efficiency of buildings, in accordance with the terms set in the recast of the Directive on the energy performance of buildings (2010/31/EU), 14 December 2010EF4 EPBD, Recast of the Directive on the energy performance of buildings (2010/31/EU). 14 December 2010iv

31、ISO 2017 All rights reservedPD CEN ISO/TR 52019-2:2017ISO 52019-2:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO tech

32、nical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely

33、 with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria need

34、ed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent r

35、ights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in t

36、his document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World

37、Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.ISO/TR 52019-2 was prepared by ISO Technical Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 2, Calculation methods,in

38、collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 89, Thermal performance of buildings and building components, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).A list of all parts in the ISO 52019 series ca

39、n be found on the ISO website. ISO 2017 All rights reserved vPD CEN ISO/TR 52019-2:2017ISO 52019-2:2017(E)IntroductionThe set of EPB standards, technical reports and supporting tools In order to facilitate the necessary overall consistency and coherence, in terminology, approach, input/output relati

40、ons and formats, for the whole set of EPB-standards, the following documents and tools are available:a) a document with basic principles to be followed in drafting EPB-standards:CEN/TS 16628:2014, Energy Performance of Buildings - Basic Principles for the set of EPB standards 8;b) a document with de

41、tailed technical rules to be followed in drafting EPB-standards;CEN/TS 16629:2014, Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards 9.The detailed technical rules are the basis for the following tools:1) a common template for each EPB-standard, including specif

42、ic drafting instructions for therelevant clauses;2) a common template for each technical report that accompanies an EPB standard or a cluster of EPBstandards, including specific drafting instructions for the relevant clauses;3) a common template for the spreadsheet that accompanies each EPB standard

43、, to demonstrate thecorrectness of the EPB calculation procedures.Each EPB-standards follows the basic principles and the detailed technical rules and relates to the overarching EPB-standard, ISO 52000-1 5.One of the main purposes of the revision of the EPB-standards is to enable that laws and regul

44、ations directly refer to the EPB-standards and make compliance with them compulsory. This requires that the set of EPB-standards consists of a systematic, clear, comprehensive and unambiguous set of energy performance procedures. The number of options provided is kept as low as possible, taking into

45、 account national and regional differences in climate, culture and building tradition, policy and legal frameworks (subsidiarity principle). For each option, an informative default option is provided (Annex B).Rationale behind the EPB technical reports There is a risk that the purpose and limitation

46、s of the EPB standards will be misunderstood, unless the background and context to their contents and the thinking behind them is explained in some detail to readers of the standards. Consequently, various types of informative contents are recorded and made available for users to properly understand

47、, apply and nationally or regionally implement the EPB standards.If this explanation would have been attempted in the standards themselves, the result is likely to be confusing and cumbersome, especially if the standards are implemented or referenced in national or regional building codes.Therefore

48、each EPB standard is accompanied by an informative technical report, like this one, where all informative content is collected, to ensure a clear separation between normative and informative contents (see CEN/TS 16629 9): to avoid flooding and confusing the actual normative part with informative con

49、tent, to reduce the page count of the actual standard, and to facilitate understanding of the set of EPB standards.This was also one of the main recommendations from the European CENSE project5that laid the foundation for the preparation of the set of EPB standards.vi ISO 2017 All rights reservedPD CEN ISO/TR 52019-2:2017ISO 52019-2:2017(E)This document This technical report accompanies the suite of EPB standards on thermal transmission properties of building elements. It relates to ISO 6946, ISO 10211, ISO 13370, ISO 13786, ISO 1