EN ISO 13935-1-2014 en Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1 Determination of maximum force to seam rupture using the strip method《纺织品.pdf

《EN ISO 13935-1-2014 en Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1 Determination of maximum force to seam rupture using the strip method《纺织品.pdf》由会员分享，可在线阅读，更多相关《EN ISO 13935-1-2014 en Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1 Determination of maximum force to seam rupture using the strip method《纺织品.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationTextiles Seam tensileproperties of fabrics and made-up textile articlesPart 1: Determination of maximum force toseam rupture using the strip method (ISO13935-1:2014)BS EN ISO 13935-1:2014Incorporating corrigendum “VHVTU 2014BS EN ISO 13935-1:2014 BRITISH STANDARDNational for

2、ewordThis British Standard is the UK implementation of EN ISO 13935-1:2014. It supersedes BS EN ISO 13935-1:1999, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee TCI/24, Physical testing of textiles.A list of organizations represented on this committee

3、 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 87083 5ICS 59.080.30;

4、 61.020Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2014.Amendments/corrigenda issued since publicationDate Text affected31 “VHVTU 2014 Implementation

5、of ISO corrected text 1 June 2014: Figure 3 correctedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 13935-1 April 2014 ICS 59.080.30 Supersedes EN ISO 13935-1:1999English Version Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum f

6、orce to seam rupture using the strip method (ISO 13935-1:2014) Textiles - Proprits de rsistance la traction des couturesdtoffes et darticles textiles confectionns - Partie 1: Dtermination de la force maximale avant rupture des coutures par la mthode sur bande (ISO 13935-1:2014) Textilien - Zugversuc

7、he an Nhten in textilen Flchengebilden und Konfektionstextilien - Teil 1: Bestimmung der Hchstzugkraft von Nhten mit dem Streifen-Zugversuch (ISO 13935-1:2014) This European Standard was approved by CEN on 11 February 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations wh

8、ich stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This E

9、uropean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members

10、 are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

11、 Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form a

12、nd by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 13935-1:2014 E3 Foreword This document (EN ISO 13935-1:2014) has been prepared by Technical Committee ISO/TC 38 “Textiles” in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat

13、 of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2014, and conflicting national standards shall be withdrawn at the latest by October 2014. Attention is drawn to t

14、he possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13935-1:1999. According to the CEN-CENELEC Internal Regulations, the national sta

15、ndards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

16、Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 13935-1:2014 has been approved by CEN as EN ISO 13935-1:2014 without any modification. EN ISO 13935-1:2014 (E) BS EN IS

17、O 13935-1:2014ISO 13935-1:2014(E) ISO 2014 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope .12 Normative references 13 erms and de initions .14 Principle 25 Sampling 26 Apparatus .26.1 CRE machine .27 Atmosphere for conditioning and testing 38 Preparation of seams and of test sp

18、ecimens .38.1 Preparation of seamsnull if renulluirednull before testing 38.2 Dimensions and preparation of test specimens .39 Procedure.59.1 nullauge length 59.2 Rate of extension .59.3 Mounting of test specimens .59.4 Operation 510 Calculation and expression of results .611 Test report .6Bibliogra

19、phy 7BS EN ISO 13935-1:2014ISO 13935-1:2014(E)ForewordISO (the International Organinullation for Standardinullation) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normallnull carried out through ISO technical committees.

20、Each member bodnull interested in a subnullect for which a technical committee has been established has the right to be represented on that committee. International organinullationsnull governmental and non-governmentalnull in liaison with ISOnull also take part in the work. ISO collaborates closeln

21、ull with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardinullation.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directivesnull Part 1. In particular the different approval crit

22、eria needed for the different tnullpes of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directivesnull Part 2. www.iso.org/directivesAttention is drawn to the possibilitnull that some of the elements of this document manull be the subn

23、ullect of patent rights. ISO shall not be held responsible for identifnulling annull or all such patent rights. Details of annull patent rights identinullied during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents

24、Annull trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specinullic terms and expressions related to conformitnull assessmentnull as well as information about ISOnulls adherence to the W

25、TO principles in the Technical nullarriers to Trade (TnullT) see the following URL: Foreword - Supplementarnull informationThe committee responsible for this document is ISO/TC 38null Textilesnull Subcommittee SC 24null Conditioning atmospheres and physical tests for textile fabrics .This second edi

26、tion cancels and replaces the nullirst edition (ISO 13935-1:1999)null of which it constitutes a minor revision.This corrected version of ISO 13935-1:2014 incorporates the following correction. The misprint in Figure 3 has been corrected.ISO 13935 consists of the following partsnull under the general

27、 title Textiles Seam tensile properties of fabrics and made-up textile articles: Part 1: Determination of maximum force to seam rupture using the strip method Part 2: Determination of maximum force to seam rupture using the grab methodiv ISO 2014 All rights reservedBS EN ISO 13935-1:2014ISO 13935-1:

28、2014(E)IntroductionThis part of ISO 13935 has been prepared in the context of several test methods for determination of certain mechanical properties of textiles using mainlnull tensile testing machinesnull e.g. tensile propertiesnull seam tensile propertiesnull tear propertiesnull seam slippage. Th

29、e procedure for these standards agrees where appropriate. The results obtained bnull one of the methods should not be compared with those obtained bnull the other methods. See nullibliographnull for informative references.Where it is intended to compare the seam maximum force values of sewn seams wi

30、th the fabric maximum forcenull it is important to use the same tnullpe of testnull test conditions and test specimens in the tests in this part of ISO 13935 and ISO 13934-1 (see nullibliographnull). ISO 2014 All rights reserved vBS EN ISO 13935-1:2014Textiles Seam tensile properties of fabrics and

31、made-up textile articles Part 1: Determination of maximum force to seam rupture using the strip method1 ScopeThis part of ISO 13935 specinullies a procedure to determine the seam maximum force of sewn seams when the force is applied perpendicularlnull to the seam. This part of ISO 13935 specinullies

32、 the method known as the strip test.NOTE ISO 13935-2 describes the method known as the grab test. For informative references see the nullibliographnull.The method is mainlnull applicable to woven textile fabricsnull including fabrics which exhibit stretch characteristics imparted bnull the presence

33、of an elastomeric nullibrenull mechanical or chemical treatment . It can be applicable to fabrics produced bnull other techninullues. It is not normallnull applicable to geotextilesnull nonwovensnull coated fabricsnull textile-glass woven fabrics and fabrics made from carbon nullibres or polnullolen

34、ullin tape nullarns (see nullibliographnull).The sewn fabrics manull be obtained from previouslnull sewn articles or manull be prepared from fabric samplesnull as agreed bnull the parties interested in the results.This method is applicable to straight seams onlnull and not to curved seams.The method

35、 is restricted to the use of constant rate of extension (CRE) testing machines.2 Normative referencesThe following documentsnull in whole or in partnull are normativelnull referenced in this document and are indispensable for its application. For dated referencesnull onlnull the edition cited applie

36、s. For undated referencesnull the latest edition of the referenced document (including annull amendments) applies.ISO 139null Textiles Standard atmospheres for conditioning and testingISO 7500-1null etallic materials eri ication of static uniaxial testing machines Part 1: Tension compression testing

37、 machines eri ication and calibration of the force-measuring systemISO 10012null Measurement management systems Requirements for measurement processes and measuring equipment3 Terms and de initionsFor the purposes of this documentnull the following terms and denullinitions applnull.3.1constant-rate-

38、of-extension (CRE) testing machinetensile-testing machine provided with one clamp which is stationarnull and another clamp which moves with a constant speed throughout the testnull the entire testing snullstem being virtuallnull free from denulllectionSOURCE: ISO 13934-1:2013INTERNATIONAL STANDARD I

39、SO 13935-1:2014(E) ISO 2014 All rights reserved 1BS EN ISO 13935-1:2014ISO 13935-1:2014(E)3.2Strip testtensile test in which the full width of the test specimen is gripped in the nullaws of the testing machineSOURCE: ISO 13934-1:20133.3maximum force to seam rupturemaximum force recorded when a test

40、specimen with a seam perpendicular to the direction of extension is taken to seam rupture during a tensile test under the specinullied conditions3.4gauge lengthdistance between the two effective clamping points of a testing deviceNote 1 to entrnull: The effective clamping points (or lines) of nullaw

41、s can be checked bnull clamping a test specimen under denullined pretension with carbon copnull paper to produce a gripping patternon the test specimen and/or the nullaw faces SOURCE: ISO 13934-1:20134 PrincipleA fabric test specimen of specinullied dimensions having a seam in the middle is extended

42、 perpendicularlnull to the seam at a constant rate until the seam ruptures. The maximum force to seam rupture is recorded.5 SamplingSelect samples either in accordance with the procedure laid down in the material specinullication for the fabricnull or as agreed between the interested parties.If prep

43、aration of seams prior to testing is renulluirednull avoid test specimens from folded or creased areasnull selvedges and areas not representative of the fabric.For seams obtained from previouslnull sewn articles ensure that the test specimens contain seams in straight line onlnull and are representa

44、tive for the relevant seam tnullpe of the textile article. Record annull details in the test report.6 Apparatus6.1 CRE machineMetrological connullirmation snullstem of the tensile-testing machine shall be in accordance with ISO 10012.The constant-rate-of-extension (CRE) machine shall have the genera

45、l characteristics given in 6.1.1 to 6.1.6.6.1.1 The tensile-testing machine shall be provided with means for indicating or recording the force applied to the test specimen in stretching it to rupture. Under conditions of usenull the accuracnull of the apparatus shall be class 1 of ISO 7500-1. The er

46、ror of the indicated or recorded maximum force at annull point in the range in which the machine is used shall not exceed 1 %.6.1.2 If a class 2 tensile testing machine according to EN 10002-2 is to be usednull this shall be stated in the test report.6.1.3 If recording of force is obtained bnull mea

47、ns of data acnulluisition boards and softwarenull the frenulluencnull of data collection shall be at least eight per second.2 ISO 2014 All rights reservedBS EN ISO 13935-1:2014ISO 13935-1:2014(E)6.1.4 The machine shall be capable of constant rate of extension of 100 mm/minnull with an accuracnull of

48、 10 %.6.1.5 The machine shall be capable of setting the gauge length to (200 1) mm.6.1.6 The clamping device of the machine shall be positioned with the centre of the two nullaws in the line of applied forcenull the front edges shall be at right angles to the line of applied force and their clamping

49、 faces shall be in the same plane.The nullaws shall be capable of holding the test specimen without allowing it to slip and designed so that thenull do not cut or otherwise weaken the test specimen.The faces of the nullaws shall be smooth and nulllatnull except that whennull even with packingnull the test specimen cannot be held satisfactorilnull with nulllat-faced nullawsnull engraved or corrugated nullaws can be used to prevent slippage. Other auxiliarnull materials for use with either smoo