EN ISO 10961-2012 en Gas cylinders - Cylinder bundles - Design manufacture testing and inspection《煤气罐 气瓶捆绑 设计 制造 测试和检验》.pdf

《EN ISO 10961-2012 en Gas cylinders - Cylinder bundles - Design manufacture testing and inspection《煤气罐 气瓶捆绑 设计 制造 测试和检验》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 10961-2012 en Gas cylinders - Cylinder bundles - Design manufacture testing and inspection《煤气罐 气瓶捆绑 设计 制造 测试和检验》.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 10961:2012Gas cylinders Cylinderbundles Design,manufacture, testing andinspectionIncorporating corrigendum March 2011BRITISH STANDARDNational forewordThis British Stand

2、ard is the UK implementation of EN ISO 10961:2012. It is identical to ISO 10961:2010. It supersedes BS EN 13769:2003 and BS ISO 10961:2010, which are withdrawn.The UK participation in its preparation was entrusted by Technical Committee PVE/3, Gas containers, to Subcommittee, PVE/3/7, Gas containers

3、 - Gas cylinder (receptacle) operations.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.ISBN 978 0 580 7 551

4、4 9ICS 23.020.30 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2010 Amendments/corrigenda issued since publicationDate Text affecte31 March 2011 Replac

5、ement of ISO text with a revised English language text.EN ISO 10961:2012 as BS EN ISO 10961:2012, and addition of supersession information3 2012 This corrigendum renumbers BS ISO 10961:2010 BS0 Juned The British Standards Institution 2012. Published by BSI Standards Limited 2012EUROPEAN STANDARD NOR

6、ME EUROPENNE EUROPISCHE NORM EN ISO 10961 April 2012 ICS 23.020.30 Supersedes EN 13769:2003English Version Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010) Bouteilles gaz - Cadres de bouteilles - Conception, fabrication, essais et inspection (ISO 10961:

7、2010) Gasflaschen - Flaschenbndel - Auslegung, Herstellung, Prfung und Inspektion (ISO 10961:2010) This European Standard was approved by CEN on 9 March 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard th

8、e status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, Fren

9、ch, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria,

10、 Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE

11、FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10961:2012: E3 Foreword The text of ISO

12、 10961:2010 has been prepared by Technical Committee ISO/TC 58 “Gas cylinders” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 10961:2012 by Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat of which is held by BSI. This Europea

13、n Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2012, and conflicting national standards shall be withdrawn at the latest by October 2012. Attention is drawn to the possibility that some of the elemen

14、ts of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13769:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following co

15、untries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sl

16、ovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10961:2010 has been approved by CEN as a EN ISO 10961:2012 without any modification. BS EN ISO 10961:2012 EN ISO 10961:2012 (E)iiiContents Page Foreword iv Introduction.v 1 Scope1 2 Normative refere

17、nces1 3 Terms and definitions .2 4 Design.4 4.1 General .4 4.2 Material .4 4.3 Frame4 4.4 Cylinders 6 4.5 Cylinder valves and cylinder fittings.6 4.6 Manifold6 4.7 Main connection(s)/main valve(s)7 4.8 Assembled bundle.7 5 Manufacturing7 6 Identification 7 6.1 General .7 6.2 Product and hazard ident

18、ification .8 6.2.1 Precautionary labels .8 6.2.2 Colour coding 8 6.3 Bundle identification for filling 8 6.3.1 General .8 6.3.2 Grouping and size of marks .8 6.3.3 Manufacturing marks 8 6.3.4 Operational marks.9 6.3.5 Certification marks9 6.4 Other useful information.9 7 Testing and inspection .9 7.

19、1 General .9 7.2 Prototype testing of the frame, the manifold and the fully assembled bundle.10 7.2.1 Approvals .10 7.2.2 Tests .10 7.3 Test and inspection at time of manufacture.11 7.3.1 Frame11 7.3.2 Manifold12 7.3.3 Bundle.12 8 Documentation 12 Annex A (normative) Special requirements for design,

20、 manufacture and testing of bundles disassembled at the time of filling, including acetylene cylinders 14 Annex B (normative) Specific requirements for acetylene cylinder bundles.15 Bibliography20 ISO 2011BS EN ISO 10961:2012 EN ISO 10961:2012 (E)Foreword ISO (the International Organization for Stan

21、dardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right

22、 to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International S

23、tandards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an

24、International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10

25、961 was prepared by Technical Committee ISO/TC 58, Gas cylinders, Subcommittee SC 4, Operational requirements for gas cylinders. This second edition cancels and replaces the first edition (ISO 10961:2010), of which it constitutes a minor revision. ISO 2011BS EN ISO 10961:2012 EN ISO 10961:2012 (E)vI

26、ntroduction For some applications, the contents of an individual gas cylinder may not satisfy the gas demand, in which case assemblies of cylinders can be used to supply larger volumes of gas in a single unit. The single unit, which contains a number of cylinders, is known as a cylinder bundle. A cy

27、linder bundle is a portable assembly which is designed to be routinely lifted and which consists of a frame and two or more cylinders connected to a manifold by cylinder valves or fittings so that the cylinders can be filled, transported and emptied without disassembly. A cylinder bundle can be subj

28、ected to rough handling in the course of normal operations. There are types of gas cylinder assemblies which use cylinder bundle components, but which are designed to be disassembled at each filling to enable the cylinders to be filled individually. Although these assemblies do not conform to the ba

29、sic definition of a cylinder bundle, they are commonly referred to as bundles. Their special requirements are included in Annex A. Acetylene cylinder bundles are often filled without disassembly. However, in order to confirm their solvent content, they are disassembled after a defined number of fill

30、ings. In International Standards, weight is equivalent to a force, expressed in newtons. However, in common parlance (as used in terms defined in this International Standard), the word “weight” continues to be used to mean “mass”, even though this practice is deprecated (see ISO 80000-4). ISO 2011BS

31、 EN ISO 10961:2012 EN ISO 10961:2012 (E)INTERNATIONAL STANDARD1Gas cylinders Cylinder bundles Design, manufacture, testing and inspection 1 Scope This International Standard specifies the requirements for the design, construction, testing and initial inspection of a transportable cylinder bundle. It

32、 is applicable to cylinder bundles containing compressed gas, liquefied gas and mixtures thereof. It is also applicable to cylinder bundles for acetylene. This International Standard does not apply to packages in which cylinders are manifolded together in a support frame which is designed to be fixe

33、d permanently to a road vehicle, to a railway wagon or to the ground as a customer storage vessel. It does not apply to cylinder bundles which are designed for use in extreme environmental or operational conditions when additional and extraordinary requirements are imposed to maintain safety standar

34、ds, reliability and performance, e.g. offshore cylinder bundles. Some special applications (e.g. electronics) require an alternative design approach. With the agreement of the inspection body, the manifold and its piping components may be designed and tested at a pressure which is appropriate to the

35、 service conditions. Specific requirements for acetylene cylinder bundles containing acetylene in a solvent are included in Annex B. This International Standard does not, however, cover acetylene cylinder bundles with solvent-free acetylene cylinders. This International Standard is intended primaril

36、y for industrial gases other than liquefied petroleum gases (LPGs), but it may also be used for LPGs. Unless otherwise stated, individual cylinders within cylinder bundles will have to conform to applicable standards for single cylinders. This International Standard specifies the additional requirem

37、ents that apply when individual cylinders are assembled into a bundle. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced

38、document (including any amendments) applies. ISO 7225, Gas cylinders Precautionary labels ISO 10297, Transportable gas cylinders Cylinder valves Specification and type testing ISO 13769, Gas cylinders Stamp marking ISO 14113, Gas welding equipment Rubber and plastics hose and hose assemblies for use

39、 with industrial gases up to 450 bar (45 MPa) ISO 2011BS EN ISO 10961:2012 EN ISO 10961:2012 (E)2 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 cylinder bundle bundle portable assembly which consists of a frame and two or more cylinders, ea

40、ch of a capacity up to 150 l and with a combined capacity of not more than 3 000 l, or 1 000 l in the case of toxic gases, connected to a manifold by cylinder valves or fittings such that the cylinders are filled, transported and emptied without disassembly 3.2 frame structural and non-structural me

41、mbers of a bundle which combine all other components together, whilst providing protection for the bundles cylinders, valves and manifold and which enable the bundle to be transported 3.3 cylinder valve valve which is fitted into a cylinder and to which a manifold is connected in a bundle 3.4 cylind

42、er fitting component, with no gas shut-off capability, which serves as a method for connecting a bundles manifold to its individual cylinders when cylinder valves are not fitted to the cylinders 3.5 manifold piping system for connecting cylinder valves or cylinder fittings to the main valve(s) or ma

43、in connection(s) 3.6 main valve valve which is fitted to the manifold and which is used for the isolation of the bundle 3.7 main connection means of making a gas connection to a bundle 3.8 tare weight weight of the bundle when empty of gas product 3.9 maximum gross weight sum of the tare weight of t

44、he bundle and the maximum permissible filling weight 3.10 compressed gas gas which, when packaged under pressure, is entirely gaseous at 50 C (including all gases with a critical temperature u 50 C) GHS ISO 2011BS EN ISO 10961:2012 EN ISO 10961:2012 (E)33.11 liquefied gas gas which, when packaged un

45、der pressure, is partially liquid at temperatures above 50 C GHS NOTE A distinction is made between a) high-pressure liquefied gas: a gas with a critical temperature between 50 C and +65 C, and b) low-pressure liquefied gas: a gas with a critical temperature above +65 C. 3.12 proof test pressure hyd

46、raulic pressure which demonstrates the structural integrity of the manifold 3.13 burst pressure gas cylinder bundles highest pressure reached in a cylinder or the bundle manifold during a burst test NOTE Adapted from ISO 10286. 3.14 working pressure settled pressure for a compressed or dissolved gas

47、 at a uniform temperature of 288 K (15 C) for a full bundle 3.15 bundle test pressure test pressure of the cylinder and manifold assembled together 3.16 maximum permissible filling weight product of the minimum guaranteed water capacity of the cylinders of the bundle and the filling ratio of the gas

48、 contained 3.17 very toxic gas gas with an LC50of less than or equal to 200 ppm (V/V), where the LC50value corresponds to one hour of exposure to gas and ppm (V/V) indicates parts per million, by volume NOTE Adapted from ISO 10298. 3.18 toxic gas gas with an LC50of more than 200 ppm but less than or

49、 equal to 5 000 ppm, where the LC50value corresponds to one hour of exposure to gas and ppm (V/V) indicates parts per million, by volume NOTE Adapted from ISO 10298. 3.19 filling pressure pressure to which a bundle is filled at the time of filling 3.20 bundle manufacturer entity that assembles the various components of the bundle into its final configuration ISO 2011BS EN ISO 10961:2012 EN ISO 10961:2012 (E)4 3.21 inspection body independent inspection and testing body approved by the competent authori