EN ISO 10256-4-2018 en Protective equipment for use in ice hockey - Part 4 Head and face protection for goalkeepers.pdf

《EN ISO 10256-4-2018 en Protective equipment for use in ice hockey - Part 4 Head and face protection for goalkeepers.pdf》由会员分享，可在线阅读，更多相关《EN ISO 10256-4-2018 en Protective equipment for use in ice hockey - Part 4 Head and face protection for goalkeepers.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Protective equipment for use in ice hockeyPart 4: Head and face protection for goalkeepersBS EN ISO 102564:2018National forewordThis British Standard is the UK implementation of EN ISO 102564:2018. It is identical to IS

2、O 102564:2016. Together with BS EN ISO 102561:2016, BS EN ISO 102562:2018, BS EN ISO 102563:2018, BS ISO 102565:2017 and BS ISO 102566, it supersedes BS EN ISO 10256:2003, which will be withdrawn upon publication of the rest of the series.The UK participation in its preparation was entrusted to Tech

3、nical Committee SW/136, Sports, playground and other recreational equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct

4、 application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 85732 4ICS 13.340.20; 97.220.20Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy

5、and Strategy Committee on 31 May 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 102564:2018EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 102564April 2018ICS 97.220.20; 13.340.20EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIO

6、NEUROPISCHES KOMITEE FR NORMUNGCENCENELEC Management Centre: Avenue Marnix 17, B1000 Brussels 2018 CEN Ref. No. EN ISO 102564:2018: EAll rights of exploitation in any form and by any means reserved worldwide for CEN national MembersProtective equipment for use in ice hockey Part 4: Head and face pro

7、tection for goalkeepers (ISO 102564:2016)quipements de protection destins tre utiliss en hockey sur glace Partie 4: Protections de tte et de visage pour les gardiens de but (ISO 102564:2016)Schutzausrstung zum Gebrauch beim Eishockey Teil 4: Kopf und Gesichtsschutz fr Torhter (ISO 102564:2016)This E

8、uropean Standard was approved by CEN on 17 September 2016.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Uptodate lists and bibliographical references

9、 concerning such national standards may be obtained on application to the CENCENELEC Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member

10、 into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France

11、, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.English VersionEN ISO 102564:2018 (E)European forewordThis document (EN ISO 102

12、564:2018) has been prepared by Technical Committee ISO/TC 83 “Sports and other recreational facilities and equipment“ in collaboration with Technical Committee CEN/TC 158 “Head protection” the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard

13、, either by publication of an identical text or by endorsement, at the latest by October 2018, and conflicting national standards shall be withdrawn at the latest by October 2018.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN

14、 shall not be held responsible for identifying any or all such patent rights.According to the CENCENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, D

15、enmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.Endo

16、rsement noticeThe text of ISO 102564:2016 has been approved by CEN as EN ISO 102564:2018 without any modification.2BS EN ISO 102564:2018ISO 102564:2016Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Requirements 24.1 General . 24.2 Design . 24.2.1 Padding 24.

17、2.2 Loadbearing area . 24.2.3 Welded wire components 24.2.4 Overlap . 24.2.5 Minimum distance (headform to face protector) 34.2.6 Maximum distance (headform to face protector) . 34.3 Protected areas (coverage) . 34.3.1 Protected area of the head . 34.3.2 Protected area of the face . 34.4 Penetration

18、 resistance 34.4.1 General 34.4.2 Types D1 and D2 34.4.3 Type D3 34.5 Shockabsorbing capacity 34.6 Puck impact resistance 34.6.1 Contact test . 34.6.2 Toughness test . 44.7 Retention system . 44.8 Field of vision . 45 Test methods . 45.1 General . 45.1.1 Tolerances and uncertainty estimations . 45.1

19、.2 Samples 45.1.3 Component assemblies 55.2 Conditioning 55.3 Protector positioning . 55.4 Protected area (coverage) test 55.4.1 Protected area of the head . 55.4.2 Protected area of the face . 55.4.3 Coverage test . 55.5 Penetration test 55.5.1 Test apparatus 55.5.2 Procedures 65.6 Shock absorbing

20、capacity test 65.7 Puck impact resistance test 66 Test report . 67 Permanent marking 68 Information for users 7 ISO 2016 All rights reserved iiiContents PageBS EN ISO 102564:2018ISO 102564:2016ForewordISO (the International Organization for Standardization) is a worldwide federation of national stan

21、dards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International org

22、anizations, governmental and nongovernmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its

23、further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/dire

24、ctives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the

25、 Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related

26、 to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 83, Sports and other recreationa

27、l facilities and equipment, Subcommittee SC 5, Ice hockey equipment and facilities.This first edition of ISO 10256-4, together with ISO 10256-1, ISO 10256-2, ISO 10256-3, ISO 10526-5, and ISO 102566, cancels and replaces ISO 10256:2003, which has been technically revised.ISO 10256 consists of the fo

28、llowing parts, under the general title Protective equipment for use in ice hockey: Part 1: General requirements Part 2: Head protection for skaters Part 3: Face protectors for skaters Part 4: Head and face protection for goalkeepers Part 5: Neck laceration protectors for ice hockey players The follo

29、wing parts are under preparation: Part 6: Lower leg protectors for ice hockey players iv ISO 2016 All rights reservedBS EN ISO 102564:2018ISO 102564:2016IntroductionIce hockey is a contact sport with intrinsic hazards. The use of protective equipment will not eliminate all injuries but is intended t

30、o substantially reduce the severity and frequency of many injuries. Participation in the sport of ice hockey by a player implies acceptance of some risk of injury. The goal is to reduce the risk.Performance requirements were determined after consideration of the state of the art of head and face pro

31、tective design and manufacture. This specification was developed to address the unique demands and hazards associated with the position of ice hockey goalkeeper.Three types of protectors are designated. All types are subject to impact resistance and shock attenuation requirements. Types D1 and D2 pr

32、otectors are subject to hockey stick blade penetration resistance requirements over their entire area of coverage. Type D3 protectors are subject to hockey puck penetration resistance requirements within the protected area of the face and hockey stick blade penetration resistance requirements over t

33、he protected area of the head. It is recommended that Type D3 protectors be used only by players 18 years of age and older. ISO 2016 All rights reserved vBS EN ISO 102564:2018This page deliberately left blankProtective equipment for use in ice hockey Part 4: Head and face protection for goalkeepers1

34、 ScopeThis part of ISO 10256 covers performance requirements for head and face protectors to be used by ice hockey goalkeepers. It is intended to be read in conjunction with ISO 102561, ISO 102562 and ISO 102563.Performance requirements are established, where appropriate for the following:a) materia

35、ls, assembly, and design;b) protected areas (coverage) and penetration resistance;c) shock absorption;d) puck impact resistance;e) retention;f) optical quality.NOTE 1 The requirements of a clause take precedent over a figure.NOTE 2 The intent of this part of ISO 10256 is to reduce the risk of injury

36、 to the head and face of ice hockey goalkeepers without compromising the form and appeal of the game.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited

37、 applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 102561:2016, Protective equipment for use in ice hockeyPart 1: General requirementsISO 102562:2016, Protective equipment for use in ice hockeyPart 2: Head protection for skatersISO

38、102563:2016, Protective equipment for use in ice hockeyPart 3: Face protectors for skatersCSA Z262.614, Specifications for Facially Featured Headforms3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 10256-1, ISO 10256-2 and ISO 102563 and the following

39、 apply.INTERNATIONAL STANDARD ISO 102564:2016 ISO 2016 All rights reserved 1BS EN ISO 102564:2018ISO 102564:20163.1goalkeeper head and face protectorgoalkeeper protectordevice intended to protect the head and face of an ice hockey goalkeeperNote 1 to entry: Examples can include but are not limited t

40、o the following: a) skater helmet in combination with a fullface protector; or b) mask that consists of 1) a front portion to cover part of the head, face and jaw, 2) a covering (e.g. cage) for the eyes and face, and 3) a moveable backplate that covers the back of the goalkeepers head.3.2Type D1goal

41、keeper head and face protectors meeting the requirement for ice hockey stick blade penetration resistance within the protected areas of the head and face3.3Type D2goalkeeper head and face protectors meeting the requirement for ice hockey stick blade penetration resistance within the protected areas

42、of the head and face and are intended for use by goalkeepers, 10 years of age or younger3.4Type D3goalkeeper head and face protectors meeting the requirement for ice hockey stick blade penetration resistance within the protected area of the head and puck penetration resistance within the protected a

43、rea of the face4 Requirements4.1 GeneralIn addition to meeting this part of ISO 10256, a goalkeeper head and face protector shall meet the requirements according to ISO 102562:2016, 4.1 to 4.3 throughout their full range of adjustment.4.2 Design4.2.1 PaddingPadding or cushioning material shall be us

44、ed to cover all hard surfaces of the protector that could otherwise come into contact with the wearers head and shall remain in position under normal conditions of use.4.2.2 Loadbearing areaProtectors shall have a minimum padded load-bearing area as specified in ISO 10256-3:2016, Figure 5.4.2.3 Weld

45、ed wire componentsAll wire ends shall terminate at the perimeter of the wire cage.4.2.4 Overlap4.2.4.1 The wire cage portion of the face protector shall overlap all edges of the head protector within the protected area (see 4.3.2) by at least 6 mm.2 ISO 2016 All rights reservedBS EN ISO 102564:2018I

46、SO 102564:20164.2.4.2 For a face protector/skater helmet combination, the face protector shall overlap the lower edge of the helmet (forehead area) by at least 6 mm in the horizontal plane and follow the helmet backwards at least to the midfrontal plane down to the basic plane (see Figure 2, GHHZZHH

47、G).4.2.5 Minimum distance (headform to face protector)Except where it is covered by padding, no part of the protector shall be closer than 10 mm to the surface of the facially featured headform within the area of protection outside of the nocontact zone.4.2.6 Maximum distance (headform to face prote

48、ctor)The horizontal distance measured on the median plane, between the inside of the face protector and points g and Sn on the facially featured headform shall not exceed 60 mm (see Figure 1).4.3 Protected areas (coverage)4.3.1 Protected area of the headThe protected area of the head shall comply wi

49、th ISO 102562:2016, 4.4.4.3.2 Protected area of the faceThe protected area shall include the front portion extending to at least the line GHLHLZZHRHRG (where L is left and R is right) in Figure 2 as viewed perpendicular to the median plane and when the protector is tested according to 5.4.2.4.4 Penetration resistance4.4.1 GeneralWith the exception of the ear apertures (ear openings) and when tested according to 5.5, the following shall apply.4.4.2 Types D1 an