EN 62952-1-2016 en Power sources for a wireless communication device - Part 1 General requirements of power modules.pdf

《EN 62952-1-2016 en Power sources for a wireless communication device - Part 1 General requirements of power modules.pdf》由会员分享，可在线阅读，更多相关《EN 62952-1-2016 en Power sources for a wireless communication device - Part 1 General requirements of power modules.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、Power sources for a wireless communication devicePart 1: General requirements of power modulesBS EN 62952-1:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62952-1:2016. It isidentical to IEC 6

2、2952-1:2016.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/65, Measurement and control, to Subcommittee GEL/65/2,Elements of systems.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to

3、include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 88957 8ICS 29.220.10; 33.040.40Compliance with a British Standard cannot confer immunity fromlegal obliga

4、tions.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62952-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62952-1 December 2016

5、 ICS 29.220.10; 33.040.40 English Version Power sources for a wireless communication device - Part 1: General requirements of power modules (IEC 62952-1:2016) Sources dnergie pour un appareil de communication sans fil - Partie 1: Exigences gnrales relatives aux modules dalimentation (IEC 62952-1:201

6、6) Energiequellen fr ein Funkkommunikationsgert - Teil 1: Allgemeine Anforderungen an Energiemodule (IEC 62952-1:2016) This European Standard was approved by CENELEC on 2016-11-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving

7、 this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three of

8、ficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrote

9、chnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania

10、, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2

11、016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62952-1:2016 E BS EN 62952-1:2016EN 62952-1:2016 2 European foreword The text of document 65B/1053/FDIS, future edition 1 of IEC 62952-1, prepared by SC 65B “Measurement and contro

12、l devices” of IEC/TC 65 “Industrial process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62952-1:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an id

13、entical national standard or by endorsement (dop) 2017-08-09 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-11-09 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC a

14、nd/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62952-1:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has

15、 to be added for the standard indicated: IEC 60086-2 NOTE Harmonized as EN 60086-2. BS EN 62952-1:2016EN 62952-1:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively

16、 referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common

17、 modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60079-0 (mod) 2011 Explosive atmospheres - Part 0: Equipment -

18、General requirements EN 60079-0 2012 - - + A11 2013 IEC 60079-11 2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety “i“ EN 60079-11 2012 IEC 60086-1 - Primary batteries - Part 1: General EN 60086-1 - IEC 60654-3 - Operating conditions for industrial-process measurement an

19、d control equipment - Part 3: Mechanical influences EN 60654-3 - IEC 60721-3-4 1995 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weatherprotected locations EN 60721-3-4 1995 IEC 61326

20、 series Electrical equipment for measurement, control and laboratory use - EMC requirements - series IEC 62952-2 2016 Power sources for a wireless communication device - Part 2: profile for power modules with batteriess - - IEC 62952-3 - Power sources for a wireless communication device - Part 3: En

21、ergy harvesting specification - - BS EN 62952-1:2016 2 IEC 62952-1:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references. 6 3 Terms, definitions, abbreviated terms, acronyms and conventions 7 3.1 Terms and definitions 7 3.2 Abbreviated terms and acronyms . 7 3.3 Conve

22、ntion for capitalizations 8 4 General requirements 8 4.1 General . 8 4.2 Compliance . 9 4.3 Design 10 4.4 Logistics . 10 4.4.1 Storage and marking 10 4.4.2 Maintenance 10 4.4.3 Transportation in a plant 10 4.4.4 Disposal 10 4.5 Protection for explosive atmospheres 10 4.5.1 General . 10 4.5.2 Transpo

23、rtation and replacement . 10 4.5.3 Battery requirements 11 4.5.4 Temperature 11 4.5.5 Air pressure . 11 4.6 Harsh environment 11 4.6.1 General . 11 4.6.2 Vibration and shock . 11 4.6.3 Humidity 11 4.6.4 Temperature 12 4.6.5 Corrosive environment . 12 4.6.6 Air pressure . 12 4.7 Interchangeability 12

24、 4.7.1 General . 12 4.7.2 Electrical interface . 12 4.7.3 Mechanical interface 13 4.8 Electrical parameters 13 Bibliography . 14 Figure 1 Various power sources applicable for a wireless communication device . 8 Table 1 Example of an implementation conformance statement . 9 BS EN 62952-1:2016IEC 6295

25、2-1:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE Part 1: General requirements of power modules FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national elec

26、trotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifi

27、cations, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Internatio

28、nal, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal d

29、ecisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for in

30、ternational use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In

31、 order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be

32、 clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certificat

33、ion bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury,

34、property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited

35、 in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying

36、 any or all such patent rights. International Standard IEC 62952-1 has been prepared by subcommittee 65B: Measurement and control devices, of IEC technical committee 65: Industrial-process measurement, control and automation. This International Standard is based on VDI/VDE 2185 Blatt 3. The text of

37、this standard is based on the following documents: FDIS Report on voting 65B/1053/FDIS 65B/1056/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all parts of the IEC 62952 series, published under the gen

38、eral title Power source for a wireless communication device, can be found on the IEC website. BS EN 62952-1:2016 4 IEC 62952-1:2016 IEC 2016 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remai

39、n unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover pag

40、e of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS EN 62952-1:2016IEC 62952-1:2016 IEC 2016 5 INTRODUCTION Industrial wireless communication ne

41、twork devices like a pressure transmitter or a valve positioner are mostly using non-copper-cable power sources. These devices are using a power module for their power source that can contain a battery and / or an energy harvesting element. In order to increase usability, power source of wireless se

42、nsors and actuators require a standardized interface and harmonized requirements. This part of IEC 62952 specifies interface and specification of power source of wireless devices and does not specify the mechanical interface within a wireless communication device and the power source. Additionally,

43、energy harvesting is a key technology for power source of wireless devices. This document also specifies interface and specification of energy harvesting devices. This document addresses the general requirements of power sources for wireless communication devices. BS EN 62952-1:2016 6 IEC 62952-1:20

44、16 IEC 2016 POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE Part 1: General requirements of power modules 1 Scope This part of IEC 62952 specifies the general requirements of power modules for wireless communication devices (WCD). This document includes additional optional specifications to permit

45、 use in explosive atmospheres and harsh environments. This document specifies the usability over the life-cycle of a power module including replacing in explosive atmosphere.Unreplaceable batteries such as memory backup are out of the scope of this standard. Secondary batteries or power modules are

46、covered by this document, but method of its power charging is out of scope. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For

47、undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60079-0:2011, Explosive atmospheres Part 0: Equipment General requirements IEC 60079-11:2011, Explosive atmospheres Part 11: Equipment protection by intrinsic safety “i“ IEC 60086-1, Primary bat

48、teries Part 1: General IEC 60654-3, Operating conditions for industrial-process measurement and control equipment Part 3: Mechanical influences IEC 60721-3-4:1995, Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 4:

49、Stationary use at non-weatherprotected locations IEC 61326 (all parts), Electrical equipment for measurement, control and laboratory use EMC requirements IEC 62952-2:2016, Power sources for a wireless communication device Part-2: Profile for power modules with batteries IEC 62952-3: 1, Power sources for a wireless communication device Part-3: Generic energy harvesting adapter module _ 1Under preparation. Stage at the time of publication: IEC/CDV:2016. BS