EN 61184-2008 en Bayonet lampholders (Incorporates Amendment A1 2011)《卡口灯座》.pdf

《EN 61184-2008 en Bayonet lampholders (Incorporates Amendment A1 2011)《卡口灯座》.pdf》由会员分享，可在线阅读，更多相关《EN 61184-2008 en Bayonet lampholders (Incorporates Amendment A1 2011)《卡口灯座》.pdf（68页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationB a y o n e t l a m p h o l d e r sB S E N 6 1 1 8 4 : 2 0 0 8+ A 1 : 2 0 1 1 Incorporating corrigendum December 2012BS EN 61184:2008+A1:2011National forewordThis British Standard is the UK implementation of EN 61184:2008+A1:2011. It is identical to IEC 61184:2008, incorpora

2、ting amendment 1:2011 and corrigendum December 2012. It supersedes BS EN 61184:2008 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text alter

3、ed by IEC amendment 1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee CPL/34, Lamps and related equipment, to Subcommittee CPL/34/2, Lamp caps and holders.A list of organizations represented on this subcommittee can be obtained on request to its secret

4、ary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 81694 9ICS 29.140.10Compliance with a British Standard cannot

5、confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 March 2009.Amendments/corrigenda issued since publicationDate Text affected30 September 2011 Implementation of IEC amendment 1:2011with CENELEC endorsemen

6、t A1:201131 March 2014 Implementation of IEC corrigendum December 2012: Table 8, footnote f deletedBRITISH STANDARDEUROPEAN STANDARD EN 61184NORME EUROPENNE EUROPISCHE NORM May 2011CENELEC European Committee forElectrotechnicalStandardization Comit Europen de Normalisation ElectrotechniqueEuropische

7、s Komitee fr Elektrotechnische NormungCentral Secretariat:rue de Stassart35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELECmembers.Ref. No. EN 61184:2008 EICS 29.140.10English versionBayonet lampholders(IEC 61184:2008)Douilles

8、baonnette (CEI 61184:2008)Bajonett-Lampenfassungen(IEC 61184:2008)This European Standard was approved by CENELEC on 2008-08-01. CENELEC members are bound to complywith the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stand

9、ard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other

10、language made by translation under the responsibility of a CENELEC member into its own language and notifiedto the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, theCzech Republic, D

11、enmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.:2008+A1 2 Foreword The text of document 34B/1385/FDIS,

12、future edition 3 of IEC 61184, prepared by SC34B, Lamp caps and holders, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallelvote and wasapproved byCENELEC asEN 61184 on 2008-08-01.This European Standardsupersedes EN 61184:1997 + A1:2001 + A2:2004.The significant tech

13、nical changes with respect to EN 61184:1997 are as follows:In EN 61184:2008, information to lampholders intended to be used in applications where they are accessible in normal use (class II as w ell as class I luminaires) are introduced. Additionally, in Table 11,lamp data where lamps no longer exis

14、t has been removed and requirements for shade holder rings havebeen amended to include shade rings according to EN 60399 into testing.The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identicalnational standard or by endorsement

15、(dop) 2009-05-01 latest date by which the national standards conflictingwith the EN have to be withdrawn (dow) 2011-08-01In this standard, the following print types are used: requirements proper: in roman type; testspecifications: in italictype; notes: in small roman type.Annex ZA has been added by

16、CENELEC. _Endorsement noticeThe text of the International Standard IEC 61184:2008 was approved by CENELEC as a EuropeanStandard without any modification.In the official version, for Bibliography, the following notes have to be added for the standards indicated:IEC 60061-4 NOTE Harmonized as EN 60061

17、-4:1992 (modified).IEC 60238 NOTE Harmonized as EN 60238:2004 (not modified).IEC 61058-1 NOTE Harmonized as EN 61058-1:2002 (modified)._Foreword to amendment A1The text of document 34B/1587/FDIS, future amendment 1 to IEC 61184:2008, prepared by SC 34B, Lamp caps and holders, of IEC TC 34, Lamps and

18、 related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 61184:2008 on 2011-05-25. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held respo

19、nsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-02-25 latest date by which the national standards conflicting

20、 with the amendment have to be withdrawn (dow) 2014-05-25 _ Endorsement notice The text of amendment 1:2011 to the International Standard IEC 61184:2008 was approved by CENELEC as an amendment to the European Standard without any modification. _ BS EN 61184:2008+A1:2011EN 61184:2008+A1:2011 (E) 3 A

21、nnex ZA(normative)Normative references to international publicationswith their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest editi

22、on of the referenceddocument (including any amendments) applies.NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HDapplies.Publication Year Title EN/HD YearIEC 60061 (mod)SeriesLamp caps and holders together with gauges for the con

23、trol of interchangeabilityand safetyEN 60061 SeriesIEC 60061-1 (mod)- 1 ) Lamp caps and holders together withgauges for the control of interchangeabilityand safety -Part 1: Lamp capsEN 60061-1 1993 2 )IEC 60061-2 (mod)- 1) Lamp caps and holders together with gauges for the control of interchangeabil

24、ityand safety -Part 2: LampholdersEN 60061-21993 2)IEC 60061-3(mod)- 1) Lamp caps and holders together with gauges for the control of interchangeabilityand safety -Part 3: GaugesEN 60061-31993 2)IEC 60064 (mod)- 1) Tungsten filament lamps for domestic and similar general lighting purposes-Performanc

25、e requirementsEN 60064 + A111995 2)2007IEC 60068-2-75 1997 Environmental testing -Part 2-75: Tests - Test Eh: Hammer tests EN 60068-2-75 1997IEC 60112 2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materialsEN 601122003IEC 60227 (mod)SeriesPol

26、yvinyl chloride insulated cables of rated voltages up to and including 450/750 V- 3 ) - IEC 60245 (mod)SeriesRubber insulated cables - Rated voltages up to and including 450/750 V - 4 ) - IEC 60399 - 1) Barrel thread for lampholders with shade holder ringEN 603992004 2)IEC 60417 Data baseGraphical s

27、ymbols for use on equipment -IEC 60432 (mod)SeriesIncandescent lamps - Safety specifications EN 60432Series1) Undated reference.2) Valid edition at date of issue.3) The HD 21 series, which is related to, but not directly equivalent with the IEC 60227 series, applies instead.4) The HD 22 series, Cabl

28、es of rated voltages up to and including 450/750 V and having cross-linked insulation, which is related to,but not directly equivalent withthe IEC 60245 series, applies instead.BS EN 61184:2008+A1:2011EN 61184:2008+A1:2011 (E) 4 Publication Year Title EN/HD YearIEC 605291989 Degrees of protection pr

29、ovi ded byenclosures (IP Code)EN 60529 + corr. May19911993IEC 60598-1(mod)- 1) Luminaires -Part 1: General requirements and testsEN 60598-1200X 5 )IEC 60664-12007 Insulation coordination for equipment withinlow-voltage systems -Part 1: Principles, requirements an d testsEN 60664-12007IEC 60695-2-11

30、2000 Fire hazard testing -Part 2-11: Glowing/hot-wire based testmethods - Glow-wire flammability test method for end-productsEN 60695-2-11 2001IEC 60695-11-52004 Fire hazard testing -Part 11-5: Test flames - Needle-flame testmethod - Apparatus, confirmatory testarrangement and guidanceEN 60695-11-52

31、005ISO 4046-42002 Paper, board, pulps and related terms -Vocabulary -Part 4: Paper and board grades and converted products- - 5) To be ratified. BS EN 61184:2008+A1:2011EN 61184:2008+A1:2011 (E) 2 CONTENTSINTRODUCTION.6 1 General71.1Scope71.2Normative references72Terms and definitions.82.1Materials.

32、82.2Means of fixing83General requirements.124General conditions fortests125Standard ratings.135.1Standard rated voltage135.2Standard rated currents.146Classification147Marking158Dimensions 179Protectionagainst electric shock1810 Terminals.1911 Provision for earthing.2112 Construction.2213 Switched l

33、ampholders.2714 Moisture resistance, insulation resistance and electrical strength.2815 Mechanical strength.3016 Screws, current-carrying parts and connections3417 Creepage distances and clearances.3418 General resistance to heat3519 Resistanceto heat, fireand tracking.4020 Resistance to excessive r

34、esidual stresses(sea son cracking) and to rusting .42 Annex A(normative) Seasoncracking/corrosion test.60 Bibliography62Figure 1 Loading device (see 15.1)44Figure 2 Bending apparatus (see15.4)45Figure 3 Gauge for holes forbackplate lampholders screws (see 12.11)46Figure 4 Clarification of some of th

35、e definitions in Clause 2.47Figure 5 Test cap B15d (see 18.3).48Figure 6 Test cap B22d (see 18.3).49Figure 7 Testing device (see 9.1).50Figure 8 Dimensions for shade support devices (see 8.1)51Figure 9 Dimensions for protective shields for B22d lampholders (see 9.1)52Figure 10 Test cap B15d (see14.3

36、).53BS EN 61184:2008+A1:2011EN 61184:2008+A1:2011 (E) 3 Figure 11 Test cap B22d (see 14.3).54Figure 12 Typical apparatus for the heating test(see18.5)55Figure 13 Nipple thread for lampholders Basic pro file and design profile for the nutand forthe screw56Figure 14 Gauges formetricthread for nipples

37、.57Figure 15 Impact-test apparatus 58Figure 16 Mounting supp ort.58Figure 17 Ball-press ure test apparatus 59Figure 18 Pressureapparatus59Table1Dimensions of threaded entries and set screws.18Table 2 Minimum dimensions of pillartypeterminals20Table 3 Limits for contact forces23Table 4 Pull and torqu

38、e values.26Table 5 Heightsof fall32Table 6 Maximum deformationvalues33Table 7 Torque values.34Table 8 Minimum distances for a.c. (50/60 Hz) sinusoidal voltages Impulse withstand categoryII.35Table 9 Heating cabinet temperature.36Table 10 Heating cabinet temperature.37Table 11 Test temperature and te

39、st lampdata .39Table A.1 Ph adjustment60BS EN 61184:2008+A1:2011EN 61184:2008+A1:2011 (E). 6 INTRODUCTION This standard covers safety requirements for bayonet lampholders and includes references toIEC60061 for the control of interchangeabilityand safetyof the cap and holder fit.NOTESafety requiremen

40、ts ensure that electrical equipment constructed in accordance with these requirementsdoes not endanger the safety of persons, domestic animals or propertywhen properly installed and maintained and used in applications for which it was intended.The thermal characteristics of lampholders are specified

41、 by the rated operating temperature(symbol T), which is the highest temperature for which the lampholder is designed. The temperature rating and the resistance to heat specified in this standard are based on twodifferent principles, aspresently found in IEC 60238 for Edison screw lampholdersand inot

42、hernational standardsfor bayonet lampholders. After experience, it maybe possible torationalize the systemsinfuture editions of thisstandard. BS EN 61184:2008+A1:2011EN 61184:2008+A1:2011 (E) 7 BAYONET LAMPHOLDERS1 General 1.1 Scope This International Standardapplies to bayonet lampholders B15d and

43、B22dfor connectionoflamps and semi-luminair es to asupply voltage of 250 V.This standard also covers lampholders which are integral with a luminaire or intended to be built into appliances. It covers the requirements for the lampholder only.Forall other requirements, s uch as protection against elec

44、tric shock in the area of the terminals, the requirements of the relevant appliance standard shall be observed and testedafter building into the appropriate equipment, when that equipment istestedaccording to itsown standard. Lampholders for use by luminaire manufact urers only are notfor retail sal

45、e. NOTE Where lampholders are used in luminaires, their maximum operating temperatures are specified in IEC 60598-1.B15ddenotes the cap/holder fit as definedby IEC 60061-1, sheet 7004-11 and IEC 60061-2,sheet 7005-16 with the corresponding gauges.B22ddenotes the cap/holder fit as definedby IEC 60061

46、-1, sheet 7004-10 and IEC 60061-2,sheet 7005-10 with the corresponding gauges.1.2 Normative references The following referenced documents are indispensable for t he application of this document.For dated references, only theedition cited applies. For undated references, the latest editionof the refe

47、renced document(including any amendments) applies.IEC 60061 (all parts), Lamp caps and holders togetherwith gauges for the control ofinterchangeability and safetyIEC 60061-1, Lamp caps and holderstogetherwith gauges for the control ofinterchangeability and safety P art 1: Lamp capsIEC 60061-2, Lamp

48、caps and holderstogetherwith gauges for the control ofinterchangeability and safety Part 2: LampholdersIEC 60061-3, Lamp caps and holderstogetherwith gauges for the control ofinterchangeability and safety Part 3: GaugesIEC 60064, Tungsten filament lamps for domestic and similar general lighting purp

49、oses Performance requirementsIEC 60068-2-75:1997, Environmentaltesting Part 2-75: Tests Test Eh: Hammer testsIEC 60112:2003, Method for the determination of the proof and the comparativetrackingindices of solid insulating materialsIEC60227 (all parts), Polyvinyl chloride insulated cables of rated voltages upto and including450/750 V!“BS EN 61184:2008+A1:2011EN 61184:2008+A1:2011 (E) 8 IEC 60245 (all parts), Rubber insulated cables Rate d voltag