EN 61076-3-114-2009 en Connectors for electronic equipment - Product requirements - Part 3-114 Rectangular connectors - Detail specification for protective housings for use with 8-.pdf

《EN 61076-3-114-2009 en Connectors for electronic equipment - Product requirements - Part 3-114 Rectangular connectors - Detail specification for protective housings for use with 8-.pdf》由会员分享，可在线阅读，更多相关《EN 61076-3-114-2009 en Connectors for electronic equipment - Product requirements - Part 3-114 Rectangular connectors - Detail specification for protective housings for use with 8-.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Connectors for electronicequipment Product requirements Part 3-114: Rectangular connectors Detail specification f

2、or protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface Variant 11 related to IEC 61076-3-106 Bayonet coupling typeBS EN 61076-3-114:2009National forewordThis British Standar

3、d is the UK implementation of EN 61076-3-114:2009. It isidentical to IEC 61076-3-114:2009.The UK participation in its preparation was entrusted to Technical CommitteeEPL/48, Electromechanical components and mechanical structures for elec-tronic equipment.A list of organizations represented on this c

4、ommittee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 56741 4ICS 31.220.10Compliance with a British Standard cannot confer immunity fromlega

5、l obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 30 September 2009Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61076-3-114:2009EUROPEAN STANDARD EN 61076-3-114 NORME EUROPENNE EUROPISCHE NORM

6、 August 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any mean

7、s reserved worldwide for CENELEC members. Ref. No. EN 61076-3-114:2009 E ICS 31.220.10 English version Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors

8、for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type (IEC 61076-3-114:2009) Connecteurs pour quipement lectroniques - Exigences de produits - Partie 3-114: Connecteurs rectangulaires -

9、 Spcification particulire pour botiers de protection utiliss avec des connecteurs blinds et non blinds 8 voies pour des frquences infrieures ou gales 600 MHz dans des environnements industriels incorporant linterface srie CEI 60603-7 - Variante 11 lie la CEI 61076-3-106 - Type daccouplement baonnett

10、e (CEI 61076-3-114:2009) Steckverbinder fr elektronische Einrichtungen - Produktanforderungen - Teil 3-114: Rechteckige Steckverbinder - Bauartspezifikation fr Schutzgehuse fr die Anwendung mit 8-poligen geschirmten und ungeschirmten Steckverbindern fr Frequenzen bis 600 MHz fr industrielle Umgebung

11、en zur Aufnahme der Schnittstelle der Reihe IEC 60603-7 - Ausfhrung 11 zu IEC 61076-3-106 - Bajonettausfhrung (IEC 61076-3-114:2009) This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditi

12、ons for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in thre

13、e official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnica

14、l committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and t

15、he United Kingdom. BS EN 61076-3-114:2009EN 61076-3-114:2009 - 2 - Foreword The text of document 48B/1995/FDIS, future edition 1 of IEC 61076-3-114, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC

16、-CENELEC parallel vote and was approved by CENELEC as EN 61076-3-114 on 2009-07-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-04-01 latest date by which the nationa

17、l standards conflicting with the EN have to be withdrawn (dow) 2012-07-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61076-3-114:2009 was approved by CENELEC as a European Standard without any modification. _ BS EN 61076-3-114:2009- 3 - EN 610

18、76-3-114:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references

19、, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-581 2008 International Electrotechnical Vo

20、cabulary (IEV) - Part 581: Electromechanical components for electronic equipment - - IEC 60068-1 -1)Environmental testing - Part 1: General and guidance EN 60068-1 19942)IEC 60068-2-14 -1)Environmental testing - Part 2-14: Tests - Test N: Change of temperature EN 60068-2-14 20092)IEC 60068-2-30 -1)E

21、nvironmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) EN 60068-2-30 20052)IEC 60512-1 -1)Connectors for electronic equipment - Tests and measurements - Part 1: General EN 60512-1 20012)IEC 60512-1-100 -1)Connectors for electronic equipment - Tests and measurements

22、- Part 1-100: General - Applicable publications EN 60512-1-100 20062)IEC 60529 -1)Degrees of protection provided by enclosures (IP Code) EN 60529 + corr. May 19912)1993 IEC 60603-7 -1)Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

23、- - IEC 60603-7-2 -1)Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz- - IEC 60603-7-3 -1)Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shield

24、ed, free and fixed connectors, for data transmission with frequencies up to 100 MHz - - IEC 60603-7-4 -1)Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHzEN 60603-7-4 20052)1)Un

25、dated reference. 2)Valid edition at date of issue. BS EN 61076-3-114:2009EN 61076-3-114:2009 - 4 - Publication Year Title EN/HD Year IEC 60603-7-5 -1)Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequ

26、encies up to 250 MHz- - IEC 60603-7-7 -1)Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz EN 60603-7-7 20062)IEC 60664-1 -1)Insulation coordination for equipment within low-voltage

27、 systems - Part 1: Principles, requirements and tests EN 60664-1 20072)IEC 61076-1 2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification EN 61076-1 2006 IEC 61156 Series Multicore and symmetrical pair/quad cables for digital communications - - IEC 61156-2 -1

28、)Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floor wiring - Sectional specification - - IEC 61156-3 -1)Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification - - IEC 61156-4 -1)Multicore

29、 and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification - - BS EN 61076-3-114:2009 2 61076-3-114 IEC:2009 CONTENTS INTRODUCTION.6 1 General data 7 1.1 Scope7 1.2 Normative references 7 2 Terms and definitions .8 3 Dimensional information .8 3.1 C

30、ommon features 8 3.2 General .9 3.3 Contact arrangement of all connector types.9 3.4 IP65 and IP67 sealing .9 3.5 Industrial IEC 60603-7 variant 11 Bayonet coupling9 3.5.1 Industrial IEC 60603-7 variant 11, fixed connectors .9 3.5.2 Industrial IEC 60603-7 variant 11, free connectors 10 3.6 Terminati

31、on and mounting information.11 3.7 General .11 3.8 Mounting information for variant 11, fixed connector11 3.9 Cap for fixed connector .12 3.10 Cap for free connector.13 4 Gauges 13 4.1 Connectors, IEC 60603-7 interface13 5 Characteristics .13 5.1 Climatic category.13 5.2 Electrical .14 5.2.1 Clearan

32、ce and creepage distances14 5.2.2 Voltage proof.14 5.2.3 Current-derating diagram.14 5.2.4 Mating cycles with power applied.15 5.2.5 Initial contact resistance 15 5.2.6 Input-to-output resistance15 5.2.7 Resistance unbalance .15 5.2.8 Initial insulation resistance 16 5.3 Transmission characteristics

33、 .16 5.3.1 General .16 5.3.2 Mechanical operation 16 5.3.3 Effectiveness of connector coupling devices transversal16 5.3.4 Effectiveness of connector coupling devices16 5.3.5 Separation and engagement forces .16 6 Test schedule.16 6.1 General .16 6.2 Test procedures and measuring methods 17 6.3 Prec

34、onditioning .17 6.4 Wiring and mounting of specimens 17 6.4.1 Wiring17 6.4.2 Mounting .17 6.5 Arrangement for contact resistance test 17 BS EN 61076-3-114:200961076-3-114 IEC:2009 3 6.6 Arrangement for dynamic stress tests (test phase AP2).17 6.7 Basic (minimum) test schedule 17 6.8 Full test schedu

35、le 17 6.8.1 Test preliminary group P18 6.8.2 Test group P18 6.8.3 Test group AP .19 6.8.4 Test group BP .20 6.8.5 Test group CP .21 6.8.6 Test group DP .21 6.8.7 Test group EP .21 Bibliography22 Figure 1 Variant 11, fixed connector 9 Figure 2 Variant 11, free connector10 Figure 3 Variant 11 mounting

36、 .11 Figure 4 Variant 11 cap for fixed connector12 Figure 5 Variant 11 cap for free connector .13 Figure 6 Connector derating diagram .15 Table 1 Dimensions of fixed connector, variant 11 .10 Table 2 Dimensions of free connector, variant 11.11 Table 3 Mounting information.11 Table 4 Dimensions of ca

37、p for fixed connector variant 11.12 Table 5 Dimensions of cap for free connector variant 1113 Table 6 Climatic categories Selected values for environmental performance level A 14 Table 7 14 Table 8 Test group P .18 Table 9 Test group AP Dynamic/climatic .19 Table 10 Test group BP Mechanical20 Table

38、11 Test group CP Continuity21 BS EN 61076-3-114:2009 6 61076-3-114 IEC:2009 INTRODUCTION Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The Internat

39、ional Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning Amphenol1). IEC takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has

40、 assured the IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained from: Amphenol Socape

41、x S.A.S. 948 Promenade de lArve B.P. 29 74311 Thyez Cedex, France Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. IEC shall not be held responsible for identifying any or all such patent rights. 1

42、)Amphenol is the trade name of Amphenol Socapex S.A.S. This information is given for the information of users of this IS and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the trade name Amphenol. Use of th

43、e trade name Amphenol requires permission from Amphenol Socapex S.A.S. BS EN 61076-3-114:200961076-3-114 IEC:2009 7 CONNECTORS FOR ELECTRONIC EQUIPMENT PRODUCT REQUIREMENTS Part 3-114: Rectangular connectors Detail specification for protective housings for use with 8-way shielded and unshielded conn

44、ectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface Variant 11 related to IEC 61076-3-106 Bayonet coupling type 1 General data 1.1 Scope This part of IEC 61076 covers protective housings for upgrading existing 8-way shielded and unshielded

45、connectors utilizing the interface described in IEC 60603-7-2, IEC 60603-7-3, IEC 60603-7-4, IEC 60603-7-5, and IEC 60603-7-7 to IP65 and IP67 ratings, according to IEC 60529, for use in industrial environments. The housings cover a variety of different locking mechanisms and a variety of different

46、mounting configurations and termination types which are detailed in IEC 60603-7. Common mating configurations for all variants are defined in IEC 60603-7. The mating dimensions for the housings under Clause 3 allow the mating conditions according to IEC 60603-7 to be fulfilled. The fully assembled v

47、ariants (connectors) described in this standard incorporate fixed and free connectors which are fully compliant with IEC 60603-7. 1.2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies.

48、For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-581:2008, International Electrotechnical Vocabulary (IEV) Part 581: Electromechanical components for electronic equipment IEC 60068-1, Environmental testing Part 1: General and guidanc

49、e IEC 60068-2-14, Environmental testing Part 2-14: Tests Test N: Change of temperature IEC 60068-2-30, Environmental testing Part 2-30: Tests Test Db: Damp heat, cyclic (12 h + 12 h cycle) IEC 60512-1, Connectors for electronic equipment Tests and measurements Part 1: General IEC 60512-1-100, Connectors for electronic equipment Tests and measurements Part 1-100: General Applicable publications 2