EN 61039-2008 en Classification of insulating liquids《绝缘液体分类［替代 CENELEC HD 618 S1］］》.pdf

《EN 61039-2008 en Classification of insulating liquids《绝缘液体分类［替代 CENELEC HD 618 S1］］》.pdf》由会员分享，可在线阅读，更多相关《EN 61039-2008 en Classification of insulating liquids《绝缘液体分类［替代 CENELEC HD 618 S1］］》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、Classification of insulatingliquidsBS EN 61039:2008raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsNational forewordThis British Standard is the UK implementation of EN 61039:2008. It is identical to IEC 61039:2008.The UK particip

2、ation in its preparation was entrusted to Technical CommitteeGEL/10, Fluids for electrotechnical applications.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users

3、 are responsible for its correct application. BSI 2009ISBN 978 0 580 57840 3ICS 29.040.10BRITISH STANDARDBS EN 61039:2008Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committ

4、ee on 31 March 2009. Amendments issued since publicationAmd. No. Date Text affectedEUROPEAN STANDARD EN 61039 NORME EUROPENNE EUROPISCHE NORM October 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotec

5、hnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61039:2008 E ICS 29.040.10 Supersedes HD 618 S1:1992English version Classification of insulating liqui

6、ds (IEC 61039:2008) Classification des liquides isolants (CEI 61039:2008) Klassifizierung der Isolierflssigkeiten (IEC 61039:2008) This European Standard was approved by CENELEC on 2008-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condition

7、s for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three

8、official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical

9、committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the

10、 United Kingdom. EN 61039:2008 - 2 - Foreword The text of document 10/741/FDIS, future edition 2 of IEC 61039, prepared by IEC TC 10, Fluids for electrotechnical applications, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61039 on 2008-10-01. This European Standard

11、 supersedes HD 618 S1:1992. The main change with regard to HD 618 S1:1992 concerns the updating of the classification of insulating liquids, taking into account the largest number possible of substances that have, or may have, possible application in electrical components. The following dates were f

12、ixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-10-01 Annex ZA has been added by CENELEC.

13、_ Endorsement notice The text of the International Standard IEC 61039:2008 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61100 NOTE Harmonized as EN 61100:1992

14、(not modified). ISO 2719 NOTE Harmonized as EN ISO 2719:2002 (not modified). _ BS EN 61039:2008- 3 - EN 61039:2008 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the appli

15、cation of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant

16、EN/HD applies. Publication Year Title EN/HD Year IEC/TS 60076-14 2004 Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials - - IEC 60296 2003 Fluids for electrotechnical applications - Unused mineral insulating oils fo

17、r transformers and switchgear EN 60296 + corr. September 2004 2004 IEC 60465 1988 Specification for unused insulating mineral oils for cables with oil ducts EN 60465 1990 IEC 60836 2005 Specifications for unused silicone insulating liquids for electrotechnical purposes EN 60836 2005 IEC 60867 1993 I

18、nsulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons EN 60867 1994 IEC 60963 1988 Specification for unused polybutenes HD 582 S1 1991 IEC 61099 1992 Specification for unused synthetic organic esters for electrical purposes EN 61099 1992 ISO 1928 1995 Solid m

19、ineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value - - ISO 2592 2000 Determination of flash and fire points - Cleveland open cup method EN ISO 2592 2001 ISO 6743-99 2002 Lubricants, industrial oils and related products (class

20、 L) - Classification - Part 99: General - - ISO 8681 1986 Petroleum products and lubricants - Method of classification - Definition of classes - - OECD 301 1992 OECD guidelines for the testing of chemicals - Ready Biodegradability - - ASTM D240-02 -1)Standard test method for heat of combustion of li

21、quid hydrocarbon fuels by bomb calorimeter - - 1)Undated reference. BS EN 61039:2008 2 61039 IEC:2008 CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 ISO classification system7 4 Classification of insulating liquids .7 4.1 Class classification7 4.2 Category classification 8 4.3 Identif

22、ying code.8 5 Summarizing outline .11 Bibliography12 Figure 1 Meaning of all the digits present in the classification of insulating liquids .11 Table 1 Class classification of petroleum products or related products.8 Table 2 Examples of classification for different insulating liquids .10 BS EN 61039

23、:200861039 IEC:2008 5 INTRODUCTION Health and safety This International Standard does not purport to address all the safety problems associated with its use. It is the responsibility of the user of the standard to establish appropriate health and safety practices and determine the applicability of r

24、egulatory limitations prior to use. The insulating liquids which are the subject of this standard should be handled with due regard to personal hygiene. Direct contact with eyes may cause slight irritation. In the case of eye contact, irrigation with copious quantities of clean running water should

25、be carried out and medical advice sought. Some of the tests specified in this standard involve the use of processes that could lead to a hazardous situation. Attention is drawn to the relevant standard for guidance. Environment This standard involves insulating liquids, chemicals and used sample con

26、tainers. The disposal of these items should be carried out in accordance with current national legislation with regard to the impact on the environment. Every precaution should be taken to prevent the release into the environment of the insulating liquids. BS EN 61039:2008 6 61039 IEC:2008 CLASSIFIC

27、ATION OF INSULATING LIQUIDS 1 Scope This International Standard establishes the detailed classification of the N family (insulating liquids) that belongs to class L (lubricants, industrial oils and related products) in accordance with ISO 8681 and ISO 6743-99, affecting product categories that inclu

28、de products derived from petroleum processing, synthetic chemical products and synthetic and natural esters. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references,

29、 the latest edition of the referenced document (including any amendments) applies. IEC/TS 60076-14:2004, Power transformers Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials IEC 60296:2003, Fluids for electrotechnical applications Unuse

30、d mineral insulating oils for transformers and switchgear IEC 60465:1988, Specification for unused insulating mineral oils for cables with oil ducts IEC 60836:2005, Specifications for unused silicone insulating liquids for electrotechnical purposes IEC 60867:1993, Insulating liquids Specifications f

31、or unused liquids based on synthetic aromatic hydrocarbons IEC 60963:1988, Specification for unused polybutenes IEC 61099:1992, Specifications for unused synthetic organic esters for electrical purposes ISO 1928:1995, Solid mineral fuels Determination of gross calorific value by the bomb calorimetri

32、c method, and calculation of net calorific value ISO 2592:2000, Determination of flash and fire points Cleveland open cup method ISO 6743-99:2002, Lubricants, industrial oils and related products (class L) Classification Part 99: General ISO 8681:1986, Petroleum products and lubricants Method of cla

33、ssification - Definition of classes OECD 301:1992, OECD guideline for testing of chemicals Ready biodegradability ASTM D240-02, Standard test method for heat of combustion of liquid hydrocarbon fuels by bomb calorimeter BS EN 61039:200861039 IEC:2008 7 3 ISO classification system ISO 8681 sets out t

34、he main rules of the classification system that applies to petroleum products, lubricants and related products. ISO 8681 suggests, as far as possible, to choose the application field as the main principle for the classification of petroleum products, lubricants, and related products. It also suggest

35、s classifying on the basis of the product typology, e.g. fuels are classified first of all on the basis of typology and secondly on the basis of end use. The ISO classification principle is based on the allocation of a code consisting of letters and numbers for the main classes and categories of pet

36、roleum products. The complete nomination consists of: the initials “ISO”; the class of the petroleum product or related product, indicated by a letter (see Table 1), which has to be clearly separated from the other symbols; the category, indicated by a group of letters ranging from 1 to 4, the first

37、 one always identifying the family to which it belongs and the others assuming a meaning, appropriately explained in the reference standard, which depends on the particular category of concerned products; (optional) some numbers, which can be added, to complete the nomination and that have a meaning

38、 appropriately explained in the reference standard for that particular category of products. In compliance with ISO 8681, the code should have the following general form: ISO CLASS CATEGORY (eventual) NUMBERS or the short form: CLASS CATEGORY (eventual) NUMBERS 4 Classification of insulating liquids

39、 In accordance with ISO 8681, the classification system indicates the products with a nomination that includes: the abbreviation “ISO”; the class of the petroleum products or related products is indicated by a letter that in this standard has the meaning defined in Table 1; the category is indicated

40、 by four letters whose meaning is explained in 4.2; a seven-figure number that makes up the identification code (described in 4.3). 4.1 Class classification The class of petroleum products or related products is indicated by a letter having the meaning reported in Table 1. BS EN 61039:2008 8 61039 I

41、EC:2008 Table 1 Class classification of petroleum products or related products Class Indication F Fuels S Solvents and raw materials for chemical industry L Lubricants, industrial oils and related products W Waxes B Bitumen In accordance with the ISO/IEC agreement, the insulating liquids belong to c

42、lass L “lubricants, industrial oils and related products”. 4.2 Category classification The four letters identify the category, with the following meaning: First letter The first letter, which identifies the insulating liquid family, will be N: Electrical insulation (Table 1, ISO 6743-99:2002). Secon

43、d letter The second letter identifies the main application field as follows: C capacitors; T transformers and switching equipment; S switching equipment operating at temperature lower than 10 C; Y cables. NOTE 1 In order to provide an indication of fire behaviour of insulating liquids, and also wish

44、ing to benefit from the experience gained by CT 14 of CENELEC, the following parameters have been added as well as the classifications “fire point” and “low heat value”. These employ the same classification criteria as the ones used for IEC 61100:1992. Third letter The third letter identifies the ev

45、entual presence of antioxidant additives, defined as follows: U if no additives are present; T if additives are present in trace (% wt. 0,08 % wt). Fourth letter The fourth letter identifies the fire point (fire point: ISO 2592:2000) as follows: O if the fire point is 300 C; K if the fire point is 3

46、00 C; L if the fire point of the liquid is not detectable. NOTE 2 IEC TC10 usually adopts ISO 2719:2002 in order to measure the flash point using the Pensky-Martens methodology (closed cup). If the value of the flash point determined by this method is 250 C, then the product is classified with the l

47、etter “K”, and, if there is no detectable flash point, the product is classified with the letter “L”. 4.3 Identifying code To complete the nomination, a seven-figure number is added, with the following meaning: BS EN 61039:200861039 IEC:2008 9 First three figures The first three figures correspond t

48、o the last three numbers of the code that identifies the eventual IEC reference standard, using number 000 in case the IEC reference standard is missing. Fourth figure The fourth figure identifies the eventual IEC sub-classification, using number 0 if there is no sub-classification. Fifth figure The

49、 fifth figure identifies the low heat value (ASTM D240-02) as follows: 1 if the low heat value is 42 MJ/kg; 2 if the low heat value is LCSET 10 C; 3 if 10 LCSET 30 C; 4 if 30 LCSET 40 C. Seventh figure The seventh figure identifies the biodegradability of the insulating liquid, according to OECD 301:1992, method C or F, defined as follows: 0 if liquid is not biodegradable; (ThOD removed 20 %) 1 if liqu