EN 60893-3-6-2004 en Insulating materials C Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6 Specifications for individual materials.pdf

《EN 60893-3-6-2004 en Insulating materials C Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6 Specifications for individual materials.pdf》由会员分享，可在线阅读，更多相关《EN 60893-3-6-2004 en Insulating materials C Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6 Specifications for individual materials.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 60893-3-6:2004Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6: Specifications for individual materials Requirements for rigid laminated sheets based on silicone resinsICS 29.035.20g49g50g3g38g50g51g60g44g49g4

2、2g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A1:2009National forewordThis British Standard is the UK implementation of EN 60893-3-6:2004+A1:2009. It is identical with IEC 6

3、0893-3-6:2003, incorporating amendment 1:2009. It supersedes BS EN 60893-3-6:2004 which will be withdrawn on 1 October 2012. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. Fo

4、r example, text altered by IEC amendment 1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee GEL/15, Insulating material, to Subcommittee GEL/15/6, Material specifications.A list of organizations represented on this subcommittee can be obtained on reques

5、t to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 60893-3-6:2004+A1:2009This British Standard was publish

6、ed under the authority of the Standards Policy and Strategy Committee on 27 February 2004 BSI 2011Amendments/corrigenda issued since publicationDate Comments 31 March 2011 Implementation of IEC amendment 1:2009 with CENELEC endorsement A1:2009.ISBN 978 0 580 62015 7EUROPEAN STANDARD NORME EUROPENNE

7、EUROPISCHE NORM CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC

8、members. Ref. No. EN 60893-3-6:2004 E ICS 29.035.01 Supersedes EN 60893-3-6:1995English version Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6: Specifications for individual materials Requirements for rigid laminated sheets based

9、 on silicone resins (IEC 60893-3-6:2003) Matriaux isolants Stratifis industriels rigides en planches base de rsines thermodurcissables usages lectriques Partie 3-6: Spcifications pour matriaux particuliers Prescriptions pour stratifis rigides en planches base de rsine silicone (CEI 60893-3-6:2003) I

10、solierstoffe Tafeln aus technischen Schichtpress-stoffen auf der Basis warmhrtender Harze fr elektrotechnische Zwecke Teil 3-6: Bestimmungen fr einzelne Werkstoffe Anforderungen fr Tafeln aus Schichtpressstoffen auf der Basis von Silikonharzen (IEC 60893-3-6:2003) This European Standard was approved

11、 by CENELEC on 2003-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

12、 standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language an

13、d notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, M

14、alta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 60893-3-6 +A1December 2009 Avenue Marnix 17, B-1000 Brussels :2004EN 69803-3-6:0240 - - 2 Foreword The text of document 15C/1526/FDIS, future edition 2 of IEC 60893-3-6, prepared by SC

15、15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60893-3-6 on 2003-12-01. This European Standard supersedes EN 60893-3-6:1995. In this revision of the EN 60893 series of specifications, new material types have b

16、een included, changes have been made to the property requirements of some existing types, a new method for testing permittivity and dissipation factor has been added, and all non-specification data for each type has been moved to a new Part 4 document IEC/TR 60893-4: Typical values. The following da

17、tes were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-12-01 Annex ZA has been added by

18、 CENELEC. _ Endorsement notice The text of the International Standard IEC 60893-3-6:2003 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60893-3-1 NOTE Harmonized as

19、 EN 60893-3-1:2004 (not modified). _ Page 2Foreword to Amendment 1 The text of document 15/492/CDV, future amendment 1 to IEC 60893-3-6:2003, prepared by IEC TC 15, Solid electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN

20、 60893-3-6:2004 on 2009-10-01. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-07-01 latest date by which the national standards conflicting with the amendment hav

21、e to be withdrawn (dow) 2012-10-01 _ Endorsement notice The text of amendment 1:2009 to the International Standard IEC 60893-3-6:2003 was approved by CENELEC as an amendment to the European Standard without any modification. _ BS EN 60893-3-6:2004+A1:2009EN 60893-3-6:2004+A1:2009 (E)CONTENTS INTRODU

22、CTION.4 1 Scope.5 2 Normative references5 3 Designation 5 4 Requirements .6 Annex ZA (normative) Normative references to international publications with their corresponding European publications 11 Bibliography12 Page 3BS EN 60893-3-6:2004+A1:2009EN 60893-3-6:2004+A1:2009 (E)INTRODUCTION This part o

23、f IEC 60893 is one of a series, which deals with industrial rigid laminated sheets based on thermosetting resins for electrical purposes. This series consists of four parts: Part 1: Definitions, designations and general requirements. (IEC 60893-1) Part 2: Methods of test (IEC 60893-2) Part 3: Specif

24、ications for individual materials (IEC 60893-3) Part 4: Typical values (IEC 60893-4) IEC 60893-3-6 contains one of the specification sheets comprising Part 3, as follows: Sheet 6: Requirements for rigid laminated sheets based on silicone resins Page 4BS EN 60893-3-6:2004+A1:2009EN 60893-3-6:2004+A1:

25、2009 (E)INSULATING MATERIALS INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES Part 3-6: Specifications for individual materials Requirements for rigid laminated sheets based on silicone resins 1 Scope This part of IEC 60893 gives the requirements for industrial

26、 rigid laminated sheets for electrical purposes based on silicone resins and different reinforcements. Applications and distinguishing properties are given in Table 1. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user

27、 for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated referen

28、ces, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60893-1, Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 1: Definitions, designations and general requiremen

29、ts 1IEC 60893-2:2003, Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 2: Methods of test 3 Designation The sheets covered by this specification are classified into types, which differ in the reinforcement employed and in their distinguishing properties. T

30、he sheets are designated by the IEC standard number; a two-letter abbreviation, denoting the resin; a second two-letter abbreviation denoting the reinforcement; a serial number; nominal thickness x width x length in mm. _ 1To be published. Page 5BS EN 60893-3-6:2004+A1:2009EN 60893-3-6:2004+A1:2009

31、(E)Example of designation: Industrial rigid laminated sheet of type SI GC 201 with a nominal thickness of 10 mm, 500 mm wide, 1 000 mm long. Sheet IEC 60893-3-6 SI GC 201 10 x 500 x 1 000 The following abbreviations are used in this Part 3 sheet: Type of resin Type of reinforcement SI Silicone GC Wo

32、ven glass cloth 4 Requirements In addition to the general requirements given in IEC 60893-1, the laminated sheets shall also comply with the dimensional requirements given in Tables 2, 3 and 4 and with the other requirements given in Tables 5, 6 and 7. Table 1 Types of industrial rigid laminated she

33、ets based on silicone resins Laminate type Resin Reinforcement Serial number Applications and distinguishing characteristics a201 Electrical and electronic applications. Extremely good electrical properties under dry conditions. Good electrical properties under humid conditions. SI GC 202 Mechanical

34、 and electrical applications at elevated temperature. Good heat resistance. a It should not be inferred from the contents of Table 1 that laminates of any particular type are necessarily unsuitable for applications other than those listed for them, or that specific laminates will be suitable for all

35、 applications within the wide description given. Page 6BS EN 60893-3-6:2004+A1:2009EN 60893-3-6:2004+A1:2009 (E)Table 2 Tolerances on thickness (Test method: see 4.1 of IEC 60893-2) Where the nominal thickness is not one of the preferred thicknesses listed, then the tolerance for the next highest pr

36、eferred nominal thickness shall apply. Nominal thickness mm Tolerance (all types) mm 0,4 0,5 0,6 0,8 1,0 1,2 1,5 2,0 2,5 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 20,0 25,0 30,0 35,0 40,0 45,0 50,0 0,10 0,12 0,13 0,16 0,18 0,21 0,24 0,28 0,33 0,37 0,45 0,52 0,60 0,72 0,82 0,94 1,02 1,12 1,30 1,50 1,70

37、 1,95 2,10 2,30 2,45 NOTE Other tolerances may be agreed between the supplier and the purchaser. Table 3 Flatness (Test method: see 4.2 of IEC 60893-2) Thickness d Length of straight edge mm mm 1 000 500 3 3 30 25 Permittivity at 48 Hz-62 Hz 6.2 Maximum 3 4,5 6,0 Conformance with the requirements fo

38、r either test constitutes, in this respect, conformance with the specification. Permittivity at 1 MHz 6.2 Maximum 3 4,5 6,0 Dissipation factor at 48 Hz-62 Hz 6.2 Maximum 3 0,02 0,07 Conformance with the requirements for either test constitutes, in this respect, conformance with the specification. Di

39、ssipation factor at 1 MHz 6.2 Maximum 3 0,02 0,07 Insulation resistance after immersion in water 6.3 M Minimum All 11041103Flammability 7.2 Category 3 V-0 V-0 The small-scale laboratory test used in this standard for assigning a flammability category is primarily for monitoring consistency of produc

40、tion of laminates. The results so obtained should not in any circumstances be considered as an overall indication of the potential fire hazards presented by these laminates under actual conditions of use. Water absorption 8.2 mg Maximum All See Table 7 !“BS EN 60893-3-6:2004+A1:2009EN 60893-3-6:2004

41、+A1:2009 (E)Table 6 Electric strength at 90 C in oil, perpendicular to laminations (1 min proof test or 20 s step-by-step test)a(kV/mm)Mean measured thickness of test specimenbmm Type 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,2 1,5 1,8 2,0 2,2 2,4 2,5 2,6 2,8 3,0 SI GC 201 10,0 9,4 8,9 8,5 8,2 8,0 7,7 7,3 7,0 6

42、,4 6,2 6,0 5,8 5,6 5,4 5,2 5,0 SI GC 202 9,1 8,6 8,2 7,9 7,6 7,3 7,0 6,6 6,2 5,6 5,4 5,3 5,2 5,2 5,2 5,1 5,0 aThe two tests are alternatives. A material meeting either requirement shall be deemed to comply with the specification with respect to electric strength at 90 C in oil, perpendicular to lami

43、nations. b If the arithmetic mean of the measured values of thickness of the test specimen lies between two values of thickness shown in the above table, the limit shall be obtained by interpolation. If the arithmetic mean of the measured values of thickness is below the minimum thickness for which

44、a limit is given, the electric strength limit appropriate to the minimum thickness shall apply. If the nominal thickness is 3 mm and the arithmetic mean measured thickness exceeds 3 mm, the limit for 3 mm shall apply.Table 7 Limits for water absorption (mg) Mean measured thickness of test specimenam

45、m Type 0,4 0,5 0,6 0,8 1,0 1,2 1,5 2,0 2,5 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 20,0 25,0 22,5 bSI GC 201 7 7 8 8 9 9 10 11 12 13 15 17 19 23 27 31 35 39 47 57 68 SI GC 202 28 29 29 31 32 33 35 36 38 40 45 50 55 65 75 85 95 105 125 150 180 a If the arithmetic mean of the measured values of thickn

46、ess of the test specimen lies between two values of thickness shown in the above table, the limit shall be obtained by interpolation. If the arithmetic mean of the measured values of thickness is below the minimum thickness for which a limit is given, the water absorption limit appropriate to the mi

47、nimum thickness shall apply. If the nominal thickness is 25 mm and the arithmetic mean measured thickness exceeds 25 mm, the limit for 25 mm shall apply. b Sheets of nominal thicknesses greater than 25 mm shall be machined to a relatively smooth surface on one face to a thickness of 22,5 mm 0,3 mm.

48、Page 10BS EN 60893-3-6:2004+A1:2009EN 60893-3-6:2004+A1:2009 (E)- 3 - NE 068-39-3:62004 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. Fo

49、r dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60893-1 - 1)Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electric