EN 60874-1-2012 en Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1 Generic specification《光纤互联装置和无源元件 光纤和光缆连接器 第1部分 总规.pdf

《EN 60874-1-2012 en Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1 Generic specification《光纤互联装置和无源元件 光纤和光缆连接器 第1部分 总规.pdf》由会员分享，可在线阅读，更多相关《EN 60874-1-2012 en Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1 Generic specification《光纤互联装置和无源元件 光纤和光缆连接器 第1部分 总规.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic interconnectingdevices and passive components Connectors for optical fibres and cablesPart 1: Generic specificationBS EN 60874-1:2012National forewordThis British Sta

2、ndard is the UK implementation of EN 60874-1:2012. It isidentical to IEC 60874-1:2011. It supersedes BS EN 60874-1:2007 which iswithdrawn.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnectingdevices and

3、 passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2012Publis

4、hed by BSI Standards Limited 2012ISBN 978 0 580 70940 1ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 30 April 2012.Amendments issued since publicati

5、onAmd. No. Date Text affectedBRITISH STANDARDBS EN 60874-1:2012EUROPEAN STANDARD EN 60874-1 NORME EUROPENNE EUROPISCHE NORM March 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Mana

6、gement Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60874-1:2012 E ICS 33.180.20 Supersedes EN 60874-1:2007English version Fibre optic interconnecting devices and passive compone

7、nts - Connectors for optical fibres and cables - Part 1: Generic specification (IEC 60874-1:2011) Dispositifs dinterconnexion et composantspassifs fibres optiques - Connecteurs pour fibres et cbles optiques - Partie 1: Spcification gnrique (CEI 60874-1:2011) Lichtwellenleiter -Verbindungselemente un

8、d passive Bauteile - Steckverbinder fr Lichtwellenleiter und Lichtwellenleiterkabel - Teil 1: Fachgrundspezifikation (IEC 60874-1:2011) This European Standard was approved by CENELEC on 2011-12-29. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the cond

9、itions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard e

10、xists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the n

11、ational electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

12、Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 60874-1:2012EN 60874-1:2012 - 2 - Foreword The text of document 86B/3272/FDIS, future edition 6 of IEC 60874-1, prepared by SC 86B, “Fibre optic interconnecting devices and passive components“, of IEC TC 86, “Fibre optics“ was submitte

13、d to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60874-1:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-09-29 latest date by which the nationa

14、l standards conflicting with the document have to be withdrawn (dow) 2012-12-29 This document supersedes EN 60874-1:2007. The specific technical changes from EN 60874-1:2007 include removal of quality assessment procedure, to add the definition of plug-socket configuration, to reconsider a drawing s

15、howing the relationship between EN 60874, EN 61753, EN 61754 series of standards, and updating the normative references. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identify

16、ing any or all such patent rights. Endorsement notice The text of the International Standard IEC 60874-1:2011 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60874 s

17、eries NOTE Harmonized in EN 60874 series. BS EN 60874-1:2012- 3 - EN 60874-1:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are i

18、ndispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the

19、relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60027 Series Letter symbols to be used in electrical technology EN 60027 Series IEC 60050-731 - International Electrotechnical Vocabulary (IEV) - Chapter 731: Optical fibre communication - - IEC 60617 Data-base Graphical symbols for diagr

20、ams - - IEC 60695-11-5 - Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 - IEC 60825-1 - Safety of laser products - Part 1: Equipment classification and requirements EN 60825-1 - IEC 61300 Series Fibre opti

21、c interconnecting devices and passive components - Basic test and measurement procedures EN 61300 Series IEC 61753 Series Fibre optic interconnecting devices and passive components performance standard EN 61753 Series IEC 61753-1 - Fibre optic interconnecting devices and passive components performan

22、ce standard - Part 1: General and guidance for performance standards EN 61753-1 - IEC 61754 Series Fibre optic connector interfaces EN 61754 Series IEC 61755 Series Fibre optic connector optical interfaces EN 61755 Series IEC/TR 61930 - Fibre optic graphical symbology - - IEC/TR 61931 - Fibre optic

23、- Terminology - - ISO 129 - Technical drawings - Dimensioning - General principles, definitions, methods of execution and special indications - - ISO 286-1 - ISO system of limits and fits - Part 1: Bases of tolerances, deviations and fitsEN ISO 286-1 - ISO 1101 - Geometrical Product Specifications (

24、GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out EN ISO 1101 - ISO 8601 - Data elements and interchange formats - Information interchange - Representation of dates and times - - BS EN 60874-1:2012 2 60874-1 IEC:2011 CONTENTS 1 Scope . 6 2 Normative references 6

25、3 Terms and definitions . 7 4 Requirements . 10 4.1 General . 10 4.2 Classification . 10 4.2.1 General . 10 4.2.2 Type 10 4.2.3 Arrangement 11 4.2.4 Style 11 4.2.5 Interface standard 12 4.2.6 Variant . 12 4.2.7 Assessment level . 12 4.2.8 Normative reference extensions . 13 4.3 Documentation 13 4.3.

26、1 Symbols. 13 4.3.2 Specification system 14 4.3.3 Drawings . 15 4.3.4 Performance 15 4.3.5 Measurements . 16 4.3.6 Test reports . 16 4.3.7 Instructions for use 16 4.4 Standardization system 16 4.4.1 Interface standards 16 4.4.2 Performance standards 17 4.4.3 Optical interface standards 17 4.4.4 Reli

27、ability documentation . 18 4.4.5 Interlinking . 18 4.5 Design and construction 20 4.5.1 Materials 20 4.5.2 Workmanship 20 4.6 Quality . 20 4.7 Performance 20 4.8 Identification and marking 20 4.8.1 Variant identification number 20 4.8.2 Component marking . 20 4.8.3 Package marking . 21 4.9 Packaging

28、 . 21 4.10 Storage conditions . 21 4.11 Safety 21 Bibliography 22 Figure 1 Standardization structure 19 BS EN 60874-1:201260874-1 IEC:2011 3 Table 1 Example of a typical connector set classification 11 Table 2 Three-level specification structure 14 Table 3 Standards interlink matrix 19 BS EN 60874-1

29、:2012 6 60874-1 IEC:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS CONNECTORS FOR OPTICAL FIBRES AND CABLES Part 1: Generic specification 1 Scope This part of IEC 60874 applies to fibre optic connector sets and individual components (i.e. adaptors, plugs, sockets) for all types, siz

30、es and structures of fibres and cables. It includes: connector set requirements; This part of IEC 60874 is divided into four clauses: Clauses 1 (Scope), 2 (Normative references) and 3 (Terms and definitions) contain general information pertaining to this generic specification; Clause 4 (Requirements

31、) contains all the requirements to be met by connectors covered by this specification. This includes requirements for classification, the IEC specification system, documentation, materials, workmanship, quality, performance, identification, and packaging. NOTE 1 Clauses 1 to 4 are applicable general

32、ly and refer to all connector standards NOTE 2 This part of IEC 60874 applies also to the connectors covered by the IEC 61753, IEC 61754, and IEC 61755 series. This standard does not cover test and measurement procedures, which are described in the IEC 61300 series. 2 Normative references The follow

33、ing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60027 (all parts), Letter symbols to be used in electri

34、cal technology IEC 60050-731, International Electrotechnical Vocabulary Chapter 731: Optical fibre communication IEC 60617, Graphical symbols for diagrams IEC 60695-11-5, Fire hazard testing Part 11-5: Test flames Needle-flame test method Apparatus, confirmatory test arrangement and guidance IEC 608

35、25-1, Safety of laser products Part 1: Equipment classification and requirements IEC 61300 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures IEC 61753 (all parts), Performance standards BS EN 60874-1:201260874-1 IEC:2011 7 IEC 61753-1: Fibr

36、e optic interconnecting devices and passive components Part 1: General and guidance for performance standardsIEC 61754 (all parts), Fibre optic connector interfaces IEC 61755 (all parts), Fibre optic connector optical interfaces IEC/TR 61930, Fibre optic graphical symbology IEC/TR 61931, Fibre optic

37、 terminology ISO 129, Technical drawings Indication of dimensions and tolerances Part 1: General principles ISO 286-1, Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Bases of tolerances, deviations and fits ISO 1101, Geometrical product specifications

38、 (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out ISO 8601, Data elements and interchange formats Information interchange Representation of dates and times 3 Terms and definitions For the purposes of this part of IEC 60874, the definitions contained in IEC 60050-73

39、1 and IEC 61931, as well as the following definitions, apply. 3.1 adaptor a component in which two or more ferrules are aligned 3.2 alignment pins cylindrical rods used for alignment in some types of connectors NOTE Typically these are used in pairs and inserted into specific guide holes in the two

40、plugs (usually for multifibre connectors) to provide the alignment. 3.3 APC connector connector with angled convex end-face ferrule capable of making an angled physical contact between the fibres 3.4 butting optical coupling coupling in which the optical ports are in contact with each other 3.5 expa

41、nded beam optical coupling coupling in which the optical ports use lens technology 3.6 ferrule fibre holding component part of the plug, usually aligned in the sleeve of an adaptor. It confines the end(s) of a single or of multiple optical fibres BS EN 60874-1:2012 8 60874-1 IEC:2011 3.7 fully inter

42、mateable connector set connector sets from different sources are considered fully intermateable when connector components from one source will mate with complementary components from other sources without mechanical damage and with optical properties maintained within specified limits 3.8 interchang

43、eable connector set connector sets are considered to be interchangeable when they share common installation geometry and have the same functional performance 3.9 mating face dimension dimension of the features which determine the mating fit between components of an optical connector set 3.10 mechani

44、cally intermateable connector set connector sets from different sources are considered mechanically intermateable when connector components from one source will mate with complementary components from other sources without mechanical damage but without regard to optical properties 3.11 mechanical re

45、ference plane (datum plane) the plane of a plug or adaptor which is perpendicular to the fibre axis and is located on a physical feature of the component. It is the datum plane from which all features of the component are measured in the direction of the fibre axis NOTE The mechanical reference plan

46、es of the plug and the adaptor should coincide when the two components are properly mated. Accordingly, each should be located on the feature that fixes or establishes the relative position of the two components when they are properly mated. 3.12 non-butting optical coupling coupling in which the po

47、rts are not in contact with each other 3.13 optical datum target theoretical datum point on a connector interface where the optical fibre core centre should be positioned by the plug or by the adaptor receptacle 3.14 optical fibre connector component normally attached to an optical cable or piece of

48、 apparatus, for the purpose of providing frequent optical interconnection/disconnection of optical fibres or cables. This usually consists of two plugs mated together in an adaptor 3.15 optical fibre connector set complete assembly of components required to provide demountable coupling between two o

49、r more optical fibre cables 3.16 optical fibre connector set kit series of components necessary to make a complete connector set BS EN 60874-1:201260874-1 IEC:2011 9 3.17 optical fibre patchcord or jumper length of optical fibre or cable, permanently terminated at both ends with two plugs 3.18 optical fibre pigtail length of optical fibre or cable, permanently terminated at one end with a plug 3.19 PC connector connector with convex end-face ferrule capable of making a