EN 175301-803-2006 en Detail Specification Rectangular connectors - Flat contacts 0 8 mm thickness locking screw not detachable《详细规范 矩形连接器 带不可拆卸锁定螺钉的厚度为0 8mm的扁平接触件》.pdf

《EN 175301-803-2006 en Detail Specification Rectangular connectors - Flat contacts 0 8 mm thickness locking screw not detachable《详细规范 矩形连接器 带不可拆卸锁定螺钉的厚度为0 8mm的扁平接触件》.pdf》由会员分享，可在线阅读，更多相关《EN 175301-803-2006 en Detail Specification Rectangular connectors - Flat contacts 0 8 mm thickness locking screw not detachable《详细规范 矩形连接器 带不可拆卸锁定螺钉的厚度为0 8mm的扁平接触件》.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 175301-803:2006Detail Specification: Rectangular connectors Flat contacts, 0,8 mm thickness, locking screw not detachableThe European Standard EN 175301-803:2006 has the status of a British StandardICS 31.220.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g5

2、1g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 175301-803:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 September 2006 BSI 2006ISBN 0 580 493

3、01 6National forewordThis British Standard was published by BSI. It is the UK implementation of EN 175301-803:2006. It supersedes BS EN 175301-803:2000 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/48, Electromechanical components and mechanical

4、structures for electronic equipment.A list of organizations represented on EPL/48 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard

5、cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD EN 175301-803 NORME EUROPENNE EUROPISCHE NORM August 2006 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisch

6、es Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 175301-803:2006 E ICS 31.220.10 Supersedes EN 175301-803:1999English version D

7、etail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable Spcification particulire: Connecteurs rectangulaires - Contacts plats, paisseur de 0,8 mm, vis darrt non dtachable Bauartspezifikation: Rechteckige Steckverbinder - Flachkontakte mit 0,8 mm Di

8、cke, unverlierbare Verriegelungsschraube This European Standard was approved by CENELEC on 2005-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterati

9、on. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by trans

10、lation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Fra

11、nce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 175301-803:2006 - 2 - Foreword This European Standard was prepared by the CENELE

12、C BTWG 117-1, Revision of EN 175301-801:1999 and EN 175301-803:1999. The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 175301-803 on 2005-10-01. This European Standard supersedes EN 175301-803:1999. The following dates were fixed: latest date by which the EN ha

13、s to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2007-03-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2008-10-01 _ - 3 - EN 175301-803:2006 Contents Page 1 General information.4 2 Norma

14、tive references4 3 Style designation.6 4 Common features7 4.1 Isometric view .7 4.2 Mating information 7 4.3 Survey of styles.8 5 Dimensions9 5.1 General .9 5.2 Fixed connector 10 5.3 Free connector15 5.4 Marking .18 5.5 Contacts termination .19 5.6 Mounting dimensions 20 6 Characteristics.22 6.1 Cl

15、imatic category 22 6.2 Electrical characteristics .22 6.3 Mechanical characteristics23 7 Test schedule 23 7.1 General .23 7.2 Group P (preliminary)24 7.3 Groups AP, BP and CP.25 8 Quality assessment procedures26 8.1 Qualification approval testing26 8.2 Quality conformance inspection27 8.3 Delayed de

16、livery, re-inspection.28 9 Ordering information28 EN 175301-803:2006 - 4 - ELECTRONIC COMPONENTS OF ASSESSED QUALITY DETAIL SPECIFICATION IN ACCORDANCE WITH EN 61076-1:1995 EN 175301-803 issue 2 _ Page 4 of 28 pages see Clause 5 for dimensions Detail specification for rectangular connectors, flat co

17、n-tacts, 0,8 mm thickness, locking screw not detachable. 2 or 3 contacts + protective earth (PE) contact Termination: Screw, solder Assessment levels: B and G (*) Climatic category: see 6.1 Electrical characteristics: see 6.2 Mechanical characteristics: see 6.3 Ordering information: see clause 9 (*)

18、 see clauses 7 and 8 Information about manufacturer who have components qualified to this detail specification is available in the current CECC 00 200: (Register of Firms, Products and Services Approved under the CECC System).1 General information This standard covers a range of rectangular connecto

19、rs with flat contacts, 0,8 mm thickness, locking screw not detachable, intended for use in industrial installations for connection or termination of sub-assemblies or components in electrical equipment in measuring, regulating and control circuits, in equipment for power supply, in fluid and air pow

20、er system and components and other electronic devices employing similar techniques. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of th

21、e referenced document (including any amendments) applies. EN 2591 1992 Aerospace series Elements of electrical and optical connection Test methods General EN 60068-1 1994 Environmental testing Part 1: General and guidance (IEC 60068-1:1988 + corrigendum October 1988 + A1:1992) EN 60512 Series Connec

22、tors for electronic equipment Test and measurements (IEC 60512 series) - 5 - EN 175301-803:2006 EN 60529 1991 Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) EN 60664-1 2003 Insulation co-ordination for equipment within low-voltage systems Part 1: Principles, requirements and

23、 tests (IEC 60664-1:1992 + A1:2000 + A2:2002) EN 60999-1 2000 Connecting devices - Electrical copper conductors Safety requirements for screw-type and screwless-type clamping units Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm up to 35 mm (inc

24、luded) (IEC 60999-1:1999) EN 61076-1 1995 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications Part 1: Generic specification - Capability approval (IEC 61076-1:1995) EN 61076-3 2000 Connectors for use in d.c., low-frequency analogue an

25、d digital high-speed data applications Part 3: Rectangular connectors with assessed quality - Sectional specification (IEC 61076-3:1999) EN 175300 1996 Sectional Specification: Rectangular connectors for frequencies below 3 MHzEN ISO 1043-1 2001 Plastics Symbols and abbreviated terms Part 1: Basic p

26、olymers and their special characteristics (ISO 1043-1:2001) EN ISO 1043-2 2001 Plastics Symbols and abbreviated terms Part 2: Fillers and reinforcing materials (ISO 1043-2:2000) EN ISO 6743-4 2001 Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic s

27、ystems) (ISO 6743-4:1999) IEC 60410 1973 Sampling plans and procedures for inspections by attributes IEC 60417 Database Graphical symbols for use on equipment IEC 60760 A1 1989 1993 Flat, quick-connect terminations EN 175301-803:2006 - 6 - 3 Style designation Connectors with assessment level accordi

28、ng to this specification shall be designated by the following system: NOTE “L” stands for letter ”N” stands for number EXAMPLES Fixed connector style A, having 3 male contacts with tin-alloy contact finish with solder terminations. Variant M assessment level G: EN 175301-803-A003MS-M3-G Free connect

29、or style , having 2 female contacts with silver-alloy contact finish with screw terminations. Variant H cable outlet on contact 3 (D) and cable outlet dia 6,5 and assessment level B: EN 175301-803-A002FA-H2D08-B - 7 - EN 175301-803:2006 4 Common features 4.1 Isometric view Figure 1 Isometric view 4.

30、2 Mating information Arrow indicate mating direction Figure 2 Mating information EN 175301-803:2006 - 8 - Table 1 Mating dimensions of permissible styles Style Combination of variants a max. mm l1max. mm l2max. mm h1max. mm h2max. mm HF-KM 15 45 60 41,8 61,8 HF-LM 15 45 60 41,8 61,8 HF-MM 15 45 60 4

31、1,8 61,8 A HF-SM 15 45 60 41,8 a B HF-RM 14,75 45 60 42,3 62,3 HF-KM 8,5 34 44 27,7 47,7 C HF-SM 8,5 34 44 27,7 aaUpon agreement between manufacturer and user. 4.3 Survey of styles Number of contacts: 2 + PE; 3 + PE Connector shape: Style A: square 28 mm, Style B: rectangular, Style C: square: 16 mm

32、 4.3.1 Survey of variants 4.3.1.1 Fixed connectors (male contacts) Variant K, square , 2 fixing holes, front mounting Variant L, square, 4 fixing holes, front mounting Variant M, square, 1 fixing screw, front mounting Variant S, round, for potting, rear mounting (tube) Variant P, rectangular, 1 fixi

33、ng screw - 9 - EN 175301-803:2006 4.3.1.2 Free connectors (female contacts) Variant H, free connector Variant R, free connector, non-rewirable 5 Dimensions 5.1 General Dimensions in mm are original. Drawings are shown in the first angle projection. The shape of the connectors may deviate from those

34、given in the following drawings as long as the specified dimensions are not influenced. Missing dimensions shall be chosen according to common characteristics and the intended use. EN 175301-803:2006 - 10 - 5.2 Fixed connector 5.2.1 Connector style A, with male contacts 1) Version 2 contacts + prote

35、ctive earth without contact Nr. 3 2) Boundary step, optional Figure 3 Mating dimensions, 2 and 3 contacts + protective earth; Variants K, L, M and S - 11 - EN 175301-803:2006 5.2.1.1 Variant K, square, 2 fixing holes, front mounting 1) Upon agreement between manufacturer and user Figure 4 Connector

36、style A, variant K, square, 2 fixing holes 5.2.1.2 Variant L, square, 4 fixing holes, front mounting 1) Upon agreement between manufacturer and user Figure 5 Connector style A, variant L, square, 4 fixing holes EN 175301-803:2006 - 12 - 5.2.1.3 Variant M, square, valve-mounted, front mounting 1) Upo

37、n agreement between manufacturer and user Figure 6 Connector style A, variant M, square, 1 fixing hole 5.2.1.4 Variant S, round for potting, rear mounting (tube) solder termination Figure 7 Connector style A, variant S - 13 - EN 175301-803:2006 5.2.2 Connector style B, with male contacts Figure 8 Ma

38、ting dimensions, 2 contacts + protective earth, variant P 5.2.2.1 Variant P, rectangular, 1 fixing hole 1) Upon agreement between manufacturer and user Figure 9 Connector style B, variant P EN 175301-803:2006 - 14 - 5.2.3 Connector style C, with male contacts 1) Version 2 contacts + protective earth

39、 without contact Nr. 3 Figure 10 Mating dimensions, 2 or 3 contacts + protective earth, variants K and S 5.2.3.1 Variant K, square, 2 fixing holes 1)1) Upon agreement between manufacturer and user Figure 11 Connector style C, variant K, square, 2 fixing holes - 15 - EN 175301-803:2006 5.2.3.2 Varian

40、t S, round, rear mounting (tube) Figure 12 Connector style C, variant S, round 5.3 Free connector 5.3.1 Connector style A, female contacts 5.3.1.1 Variant H, free connector 1) Version 2 contacts + protective earth without contact Nr. 3 2) Cable diameter 4 to 6 mm or 6 to 8 mm or 8 to 10 mm upon agre

41、ement Figure 13 2 or 3 contacts + protective earth, variant H 5.3.1.2 Variant R, free connector, non rewirable Dimensions see 5.3.1.1 EN 175301-803:2006 - 16 - 5.3.2 Connector style B, female contacts 5.3.2.1 Variant H, free connector 3) Cable diameter 4 to 6 mm or to 8 mm upon agreement Figure 14 2

42、 contacts + protective earth, variant H 5.3.2.2 Variant R, free connector, non rewirable Dimensions see 5.3.2.1 - 17 - EN 175301-803:2006 5.3.3 Connector style C 5.3.3.1 Variant H, free connector 1) Version 2 contacts + protective earth without contact Nr. 3 2) Cable diameter 4 to 6 mm upon agreemen

43、t Figure 15 2 or 3 contacts + protective earth, variant H 5.3.3.2 Variant R, free connector, non rewirable Dimensions see 5.3.3.1 EN 175301-803:2006 - 18 - 5.3.4 Insert position, variant H Style of connector Insert position alternate, mountable A 4 90 B 2 180 C 4 90 5.3.5 Cable outlet, variants H an

44、d R Direction of cable outlet relative to contact position Contact position Ordering PE A 1 B 2 C 3 D 5.3.6 Cable outlet diameter or wire size Variant H: 4 mm to 6 mm; 6 mm to 8 mm; 8 mm to 10 mm Variant R: 0,34 mm; 0,5 mm; 0,75 mm; 1,5 mm 5.4 Marking Connectors shall be marked with the following: 5

45、.4.1 Mark of origin (manufacturers name or trade mark) 5.4.2 EN type designation according to clause 3 The manufacturer may use his own part number providing that a cross-reference list is available. 5.4.3 Additional marking 5.4.3.1 Contact positions marking Marking shall be on the mating side of th

46、e connector insert acc. to Figures 16 to 19. On the termination side acc. to the manufacturer option. - 19 - EN 175301-803:2006 5.4.3.2 Insulating parts All insulating parts shall be marked with the symbols for plastics (if applicable) acc. to EN ISO 1043-1 and EN ISO 1043-2. Such marking facilitate

47、s identification of material for recycling practices at the end of life. View of the mating side: Figure 16 Connector for male contacts 3+PE Figure 18 Connector for male contacts 2+PE 1)Figure 17 Connector for female contacts 3+PE Figure 19 Connector for female contacts 2+PE 1)1) Square type availab

48、le too 5.5 Contacts termination 5.5.1 Screw or solder Style A, B conductor cross section max 1,5 mmStyle C conductor cross section max 0,75 mm EN 175301-803:2006 - 20 - 5.6 Mounting dimensions 5.6.1 Style A 5.6.1.1 Variant K, 2 fixing holes Figure 20 Style A, variant K 5.6.1.2 Variant L, 4 fixing ho

49、les Figure 21 Style A, variant L oror- 21 - EN 175301-803:2006 5.6.1.3 Variant M, 1 fixing screw acc. to users requirements valve radiusFigure 22 Style A, variant M 5.6.2 Style B 5.6.2.1 Variant P, 1 fixing screw Figure 23 Style B, variant P 5.6.3 Style C 5.6.3.1 Variant K, 2 fixing holes Figure 24 Style C, variant K EN 175301-803:2006 - 22 - 6 Characteristics 6.1 Climatic category According to EN 60068-1. Table 2 Clim