EN 818-5-1999 en Short link chain for lifting purposes - Safety - Part 5 Chain slings - Grade 4 (Incorporates Amendment A1 2008)《起重用短扁节链条 安全 第5部分 吊链 等级4号 包含修改件A1-2008年4月》.pdf

《EN 818-5-1999 en Short link chain for lifting purposes - Safety - Part 5 Chain slings - Grade 4 (Incorporates Amendment A1 2008)《起重用短扁节链条 安全 第5部分 吊链 等级4号 包含修改件A1-2008年4月》.pdf》由会员分享，可在线阅读，更多相关《EN 818-5-1999 en Short link chain for lifting purposes - Safety - Part 5 Chain slings - Grade 4 (Incorporates Amendment A1 2008)《起重用短扁节链条 安全 第5部分 吊链 等级4号 包含修改件A1-2008年4月》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 818-5:1999 +A1:2008Short link chain for lifting purposes Safety Part 5: Chain slings Grade 4ICS 53.020.30g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g6

2、0g53g44g42g43g55g3g47g36g58BS EN 818-5:1999+A1:2008This British Standard was published under the authority of the Standards Committee and comes into effect on 15 September 1999 BSI 2008ISBN 978 0 580 64081 0National forewordThis British Standard is the UK implementation of EN 818-5:1999+A1:2008. It

3、supersedes BS EN 818-5:1999 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. The UK partici

4、pation in its preparation was entrusted to Technical Committee MHE/1, Chains and fittings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible f

5、or its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationDate Comments30 September 2008 Implementation of CEN amendment A1:2008EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 818-5:1999+A1 April 200

6、8 ICS 53.020.30 Supersedes EN 818-5:1999 English Version Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 Chanes de levage maillons courts - Scurit - Partie 5: Elingues en chanes - Classe 4 Kurzgliedrige Rundstahlketten fr Hebezwecke - Sicherheit - Teil 5: Anschlagkett

7、en - Gteklasse 4 This European Standard was approved by CEN on 16 April 1999 and includes Amendment 1 approved by CEN on 10 February 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nation

8、al standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in an

9、y other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Es

10、tonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EU

11、ROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 818-5:1999+A1:2008: EEN 818-5:1999+A1:2008 (E) 2 Contents Page Foreword4 Introduction .5 1 Sco

12、pe 5 2 Normative references 5 3 Terms and definitions .6 4 Hazards .10 5 Safety requirements 10 5.1 Components of a chain sling10 5.1.1 Chain .10 5.1.2 Links10 5.1.3 Hooks 11 5.2 Design and construction.11 5.2.1 Assembly of chain slings11 5.2.2 Endless chain slings .11 5.2.3 Tolerance on length of t

13、he chain sling11 5.3 Working load rating .11 5.3.1 Single-leg chain slings11 5.3.2 Multi-leg chain slings 11 5.3.3 Endless chain slings .12 6 Verification of safety requirements13 6.1 Qualification of personnel 13 6.2 Components of a chain sling13 6.3 Manufacturing proof force test for the chain sli

14、ng 13 6.3.1 General13 6.3.2 Manufacturing proof force factors.13 6.3.3 Post-test examination .13 7 Marking, labelling and packaging 14 7.1 General14 7.2 Single-leg chain slings14 7.3 Multi-leg chain slings rated for a range of angles from 0 to 45 to the vertical.15 8 Manufacturers certificate .15 9

15、Information for use 16 Annex A (normative) Alternative method of rating and marking a chain sling for a specific lifting application and not for use in general lifting purposes 17 A.1 General17 A.2 Alternative method of rating.17 A.3 Manufacturing proof force 17 A.4 Marking of chain slings rated by

16、the alternative method of rating.18 Annex B (informative) !Bases for calculation of values for the working load limits“19 B.1 Calculated values of working load limit (WLL) for single-leg chain slings .19 B.2 Calculated values of working load limits (WLL) for multi-leg chain slings .19 Annex C (infor

17、mative) Designation system for chain slings - Grade 420 Annex D (informative) Identification tags for chain slings21 D.1 General21 D.2 Tags for chain slings.21 BS EN 818-5:1999+A1:2008EN 818-5:1999+A1:2008 (E) 3 Annex ZA (informative) !Relationship between this European Standard and the Essential Re

18、quirements of EU Directive 98/37/EC23 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC24 !Bibliography 25 BS EN 818-5:1999+A1:2008EN 818-5:1999+A1:2008 (E) 4 Foreword This document (EN 818-5:1999+A1:2008) has been prepared

19、by Technical Committee CEN/TC 168 “Chains, ropes, webbing, slings and accessories - Safety”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2008 a

20、nd conflicting national standards shall be withdrawn at the latest by October 2008. This document includes Amendment 1, approved by CEN on 2008-02-10. This document supersedes EN 818-5:1999. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This do

21、cument has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document. The o

22、ther Parts of EN 818 are: Part 1: General conditions of acceptance Part 2: Medium tolerance chain for chain slings - Grade 8 Part 3: Medium tolerance chain for chain slings - Grade 4 Part 4: Chain slings - Grade 8 Part 6: Chain slings - Specifications for information for use and maintenance to be pr

23、ovided by the manufacturer Part 7: Fine tolerance chain for hoists, Grade T (types T, DAT, DT) According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech R

24、epublic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 818-5:1999+A1:2008EN 818-5:1999+A1:2008 (E) 5

25、Introduction This European Standard has been prepared to be a harmonized standard to provide one means of complying with the essential safety requirements of the Machinery Directive and associated EFTA regulations. The extent to which hazards are covered is indicated in the scope. In addition, lifti

26、ng equipment shall conform as appropriate to !EN ISO 12100“ for hazards which are not covered by this standard. !This standard is a Type C standard as stated in EN ISO 12100. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of

27、 this type C standard take precedence over the provisions of the other standards, for equipment that have been designed and built according to the provisions of this type C standard.“ 1 Scope This Part of EN 818 specifies the requirements related to safety, methods of rating and testing of single-,

28、two-, three-, four-leg and endless chain slings, assembled by welding, using short link grade 4 medium tolerance chain conforming to !EN 818-3:1999+A1“ together with the appropriate range of components of the same grade in accordance with !EN 1677-5:2001+A1“ and !-6:2001+A1“. These chain slings are

29、intended for lifting objects, materials or goods. NOTE Instructions for use and maintenance of chain slings are covered by !EN 818-6:2000+A1“. The hazards covered by this Part of the standard are identified in clause 4. Annex A gives an alternative method of rating and marking a chain sling for a sp

30、ecific lifting application. Annex B contains the bases for calculation of working load limits. Annex C gives an example of a designation system for chain slings. Annex D gives an example of identification tags for chain slings. !Annexes ZA and ZB give“ the relationship with EU Directives. 2 Normativ

31、e references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to, or revisions of an

32、y of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. !deleted text“ !EN 818-1:1996+A1“, Short link chain for lifting purposes - Safety Part 1: General condition

33、s of acceptance !EN 818-3:1999+A1“, Short link chain for lifting purposes - Safety Part 3: Medium tolerance chain for chain slings - Grade 4 BS EN 818-5:1999+A1:2008EN 818-5:1999+A1:2008 (E) 6 !EN 818-6:2000+A1“, Short link chain for lifting purposes - Safety Part 6: Chain slings - Specification for

34、 information for use and maintenance to be provided by the manufacturer EN 1050:1996, Safety of machinery - Principles for risk assessment !EN 1677-5:2001+A1“, Components for slings - Safety Part 5: Forged steel lifting hooks with latch - Grade 4 !EN 1677-6:2001+A1“, Components for slings - Safety P

35、art 6: Links - Grade 4 !deleted text“ !EN ISO 12100-1, Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2, Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (I

36、SO 12100-2:2003)“ 3 Terms and definitions !For the purposes of this document, the terms, definitions and symbols given in EN 818-1:1996+A1 and the following apply.“ !3.1 chain sling assembly consisting of a chain leg or chain legs joined to upper and lower terminals for attaching loads to the hook o

37、f a crane or other lifting machine NOTE See Figures 1 to 4.“ 3.2 nominal size of chain sling The nominal size of short link chain, in millimetres, used in the manufacture of the chain sling. 3.3 grade of chain sling For the purpose of designation in accordance with annex C, is the same as the grade

38、of the short link chain used in the manufacture of the chain sling i.e. 4. 3.4 master link A link forming the upper terminal of a chain sling by means of which the chain sling is attached to the hook of a crane or other lifting machine. !deleted text“. !NOTE See Figures 1 to 4.“ 3.5 length of !delet

39、ed text“ chain sling For a finished chain sling, the length from the lower bearing point of the lower terminal to the upper bearing point of the upper terminal !deleted text“. !NOTE See Figures 1 to 4.“ BS EN 818-5:1999+A1:2008EN 818-5:1999+A1:2008 (E) 7 3.6 intermediate master link A link used to c

40、onnect one or two legs of a chain sling to a master link used during the assembly of a three- or four-leg chain sling !deleted text“. !NOTE See Figures 3 and 4.“ 3.7 lower terminal A link, hook or other device fitted at the end of a leg of a chain sling, remote from the master link or upper terminal

41、. 3.8 joining link A welded link fitted to the end of a chain to connect it either directly or through an intermediate link to an upper or lower terminal or intermediate master link !deleted text“ or in the case of an endless chain sling to the other end of the chain. !NOTE See Figures 1 to 4.“ 3.9

42、intermediate link A welded link used to form a connection between the terminal and the joining link fitted to the chain !deleted text“. !NOTE See Figures 1 to 4.“ 3.10 manufacturing proof force (MPF) of a chain sling A force applied, during manufacture, as a test to the whole chain sling or a force

43、applied as a test to a section of a chain sling. 3.11 Working load limit (WLL) of a chain sling The maximum mass which a chain sling is authorized to sustain in general lifting service. !3.12 master link assembly assembly consisting of a master link together with two intermediate master links“ BS EN

44、 818-5:1999+A1:2008EN 818-5:1999+A1:2008 (E) 8 1. Master link 5. Joining link 2. Intermediate link (if required) 6. Intermediate link (if required) 3. Joining link 7. Hook or other lower terminal 4. Chain NOTE L = length of chain sling Figure 1 Single-leg chain sling 1. Master link 5. Joining link 2

45、. Intermediate link (if required) 6. Intermediate link (if required) 3. Joining link 7. Hook or other lower terminal 4. Chain NOTE L = length of chain sling Figure 2 Two-leg chain sling BS EN 818-5:1999+A1:2008EN 818-5:1999+A1:2008 (E) 9 1. Master link 5. Joining link 2. Intermediate master link 6.

46、Intermediate link (if required) 3. Joining link 7. Hook or other lower terminal 4. Chain NOTE L = length of chain sling Figure 3 Three-leg chain sling 1. Master link 5. Joining link 2. Intermediate master link 6. Intermediate link (if required) 3. Joining link 7. Hook or other lower terminal 4. Chai

47、n NOTE L = length of chain sling Figure 4 Four-leg chain sling BS EN 818-5:1999+A1:2008EN 818-5:1999+A1:2008 (E) 10 4 Hazards !Accidental release of a load, or release of a load due to“ failure of lifting accessories such as chain slings or their component parts puts at risk either directly or indir

48、ectly the safety or health of those persons within the danger zone of lifting equipment. In order to provide the necessary strength and durability of lifting accessories this Part of EN 818 lays down requirements for the design, manufacture and testing to ensure that specified levels of performance

49、are met. Fatigue failure has not been identified as a hazard when chain slings having the specified levels of performance given in this Part of EN 818 are used in general lifting service. Since failure can be caused by the incorrect choice of grade and specification of lifting accessories this Part of EN 818 also gives the requirements for marking and the manufacturers certificate. Errors in fitting together of welded chain slings can also lead to premature failure and this European Standard contains dimensional requirements to allow correct fit. T