EN 636-2015 en Plywood - Specifications《胶合板 规格参数》.pdf

《EN 636-2015 en Plywood - Specifications《胶合板 规格参数》.pdf》由会员分享，可在线阅读，更多相关《EN 636-2015 en Plywood - Specifications《胶合板 规格参数》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPlywood SpecificationsBS EN 636:2012BS EN 636:2012+A1:2015BS EN 636:2012+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 636:2012+A1:2015. It supersedes BS EN 636:2012 which is withdrawn.The start and finish of text introduced or

2、 altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee B/541, Wood based panels.A li

3、st of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards

4、 Limited 2015ISBN 978 0 580 86566 4ICS 79.060.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2013.Amendments/corrigenda issued since publicationDat

5、e Text affected30 April 2015 Implementation of CEN amendment A1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 636:2012+A1 March 2015 ICS 79.060.10 Supersedes EN 636:2012English Version Plywood - Specifications Contreplaqu - Exigences Sperrholz - Anforderungen This European Standard was ap

6、proved by CEN on 11 August 2012 and includes Amendment 1 approved by CEN on 27 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-dat

7、e lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

8、under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Form

9、er Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT

10、EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 636:2012+A1:2015 EEN 636:2012+A1:2015 (E) 2 Contents Page

11、 Foreword 4 1 Scope 5 2 Normative references 5 3 Terms and definitions .7 4 Symbols and subscripts .7 5 Classification system 8 6 General requirements 9 6.1 Tolerances on dimensions .9 6.2 Mechanical characteristics .9 6.2.1 General purpose (non-structural application) 9 6.2.2 Structural application

12、 . 10 6.3 Formaldehyde release . 10 6.3.1 Classification . 10 6.3.2 Conditioning of test pieces 11 7 Requirements for plywood for use in dry conditions . 11 7.1 Bonding quality . 11 7.2 Biological durability . 11 8 Requirements for plywood for use in humid conditions 12 8.1 Bonding quality . 12 8.2

13、Biological durability . 12 9 Requirements for plywood for use in exterior conditions 12 9.1 Bonding quality . 12 9.2 Biological durability . 12 10 Supplementary properties . 12 11 Verification of compliance . 12 11.1 General . 12 11.2 External control . 12 11.3 Factory production control 13 12 Marki

14、ng, identification and documentation . 14 12.1 Boards marketed within the European Economic area for construction applications . 14 12.2 Other boards . 14 Annex A (normative) Supplementary properties . 15 Annex B (informative) Durability of wood and wood-based products - Definition of Use classes of

15、 biological attack- Application to plywood . 16 B.1 General . 16 B.2 Use class1 . 16 B.3 Use class 2 16 B.4 Use class 3 16 B.5 Use class 4 17 B.6 Use class 5 17 BS EN 636:2012+A1:2015EN 636:2012+A1:2015 (E)EN 636:2012+A1:2015 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms

16、and definitions .7 4 Symbols and subscripts .7 5 Classification system 8 6 General requirements 9 6.1 Tolerances on dimensions .9 6.2 Mechanical characteristics .9 6.2.1 General purpose (non-structural application) 9 6.2.2 Structural application . 10 6.3 Formaldehyde release . 10 6.3.1 Classificatio

17、n . 10 6.3.2 Conditioning of test pieces 11 7 Requirements for plywood for use in dry conditions . 11 7.1 Bonding quality . 11 7.2 Biological durability . 11 8 Requirements for plywood for use in humid conditions 12 8.1 Bonding quality . 12 8.2 Biological durability . 12 9 Requirements for plywood f

18、or use in exterior conditions 12 9.1 Bonding quality . 12 9.2 Biological durability . 12 10 Supplementary properties . 12 11 Verification of compliance . 12 11.1 General . 12 11.2 External control . 12 11.3 Factory production control 13 12 Marking, identification and documentation . 14 12.1 Boards m

19、arketed within the European Economic area for construction applications . 14 12.2 Other boards . 14 Annex A (normative) Supplementary properties . 15 Annex B (informative) Durability of wood and wood-based products - Definition of Use classes of biological attack- Application to plywood . 16 B.1 Gen

20、eral . 16 B.2 Use class1 . 16 B.3 Use class 2 16 B.4 Use class 3 16 B.5 Use class 4 17 B.6 Use class 5 17 EN 636:2012+A1:2015 (E) 3 B.7 Summary of Use classes for plywood . 18 B.8 Guide for the application to plywood 19 B.8.1 Introduction 19 B.8.2 General decision making 19 B.8.3 General precautions

21、 19 B.8.4 Durability (inherent or conferred) of plywood 20 Bibliography 21 BS EN 636:2012+A1:2015EN 636:2012+A1:2015 (E)EN 636:2012+A1:2015 (E) 4 Foreword This document (EN 636:2012+A1:2015) has been prepared by Technical Committee CEN/TC 112 “Wood-based panels”, the secretariat of which is held by

22、DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2015, and conflicting national standards shall be withdrawn at the latest by September 2015. Attention is drawn to the possibility th

23、at some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2014-12-27. The start and finish of text introduced or altered by amend

24、ment is indicated in the text by tags ! “. This document supersedes !EN 636:2012“. !Deleted text“ According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyp

25、rus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the Unite

26、d Kingdom. BS EN 636:2012+A1:2015EN 636:2012+A1:2015 (E)EN 636:2012+A1:2015 (E) 4 Foreword This document (EN 636:2012+A1:2015) has been prepared by Technical Committee CEN/TC 112 “Wood-based panels”, the secretariat of which is held by DIN. This European Standard shall be given the status of a natio

27、nal standard, either by publication of an identical text or by endorsement, at the latest by September 2015, and conflicting national standards shall be withdrawn at the latest by September 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of p

28、atent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2014-12-27. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document superse

29、des !EN 636:2012“. !Deleted text“ According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

30、Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 636:2012+A1:2015 (E) 5 1 Scope !This European Stan

31、dard specifies the requirements for plywood, as defined in EN 313-2, for both general purpose use (non-structural application) and structural application in dry, humid or exterior conditions. It also gives a classification system based on the bending properties. NOTE 1 This European Standard is refe

32、renced in EN 13986 for construction applications. This standard can be appropriately applied for all plywood, including overlaid and coated plywood, but it does not cover materials or processes used for overlaying or coating. Neither does it cover any materials or processes applied in relation to en

33、hancement of biological durability. NOTE 2 For additional guidance on biological durability and the potential need for preservative treatment, according to application and serviceability, reference can be made to CEN/TS 1099. The values listed under Clause 4 relate only to product properties; they a

34、re not characteristic values and are not to be used in design calculations. NOTE 3 Characteristic values (i.e. for use in design calculation according to EN 199511) are given either in EN 123692 which is based on the classification system given in this standard or by the manufacturer based on testin

35、g according to EN 789, EN 1058 and ENV 1156. Additional information on supplementary properties for certain applications is also given.“ 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dat

36、ed references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 310, Wood-based panels - Determination of modulus of elasticity in bending and of bending strength EN 314-1, Plywood - Bonding quality - Part 1:

37、 Test methods EN 314-2, Plywood - Bonding quality - Part 2: Requirements EN 315, Plywood - Tolerances for dimensions EN 318, Wood based panels - Determination of dimensional changes associated with changes in relative humidity EN 322, Wood-based panels - Determination of moisture content EN 323, Woo

38、d-based panels - Determination of density EN 324-1, Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length EN 324-2, Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness EN 326-

39、1, Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results BS EN 636:2012+A1:2015EN 636:2012+A1:2015 (E)EN 636:2012+A1:2015 (E) 6 EN 326-2, Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing an

40、d factory production control EN 326-3, Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels EN 335-3:1995, Durability of wood and wood-based products Definition of hazard classes of biological attack Part 3: Application to wood-based panels EN 594, T

41、imber structures - Test methods - Racking strength and stiffness of timber frame wall panels EN 596, Timber structures - Test methods - Soft body impact test of timber framed walls EN 635-1, Plywood - Classification by surface appearance - Part 1: General EN 635-2, Plywood - Classification by surfac

42、e appearance - Part 2: Hardwood EN 635-3, Plywood - Classification by surface appearance - Part 3: Softwood CEN/TS 635-4, Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline EN 635-5, Plywood - Classification by surface appearance - Part 5: Methods

43、 for measuring and expressing characteristics and defects EN 717-1, Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method EN 717-2, Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis m

44、ethod EN 789, Timber structures - Test methods - Determination of mechanical properties of wood based panels EN 1058, Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values ENV 1156, Wood-based panels Determination of duration load and creep factors EN

45、 1195, Timber structures - Test methods - Performance of structural floor decking EN 12369-2, Wood-based panels - Characteristic values for structural design - Part 2: Plywood EN 13446, Wood-based panels - Determination of withdrawal capacity of fasteners EN 13810-1, Wood-based panels - Floating flo

46、ors - Part 1: Performance specifications and requirements CEN/TS 13810-2, Wood-based panels - Floating floors - Part 2: Test methods EN 13986, Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking EN 14272, Plywood - Calculation method for some mechanical

47、properties BS EN 636:2012+A1:2015EN 636:2012+A1:2015 (E)EN 636:2012+A1:2015 (E) 6 EN 326-2, Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control EN 326-3, Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an iso

48、lated lot of panels EN 335-3:1995, Durability of wood and wood-based products Definition of hazard classes of biological attack Part 3: Application to wood-based panels EN 594, Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels EN 596, Timber structures - T

49、est methods - Soft body impact test of timber framed walls EN 635-1, Plywood - Classification by surface appearance - Part 1: General EN 635-2, Plywood - Classification by surface appearance - Part 2: Hardwood EN 635-3, Plywood - Classification by surface appearance - Part 3: Softwood CEN/TS 635-4, Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline EN 635-5, Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects EN 717-1, Wood-based panels - Det