EN 609-2-1999 en Agricultural and forestry machinery - Safety of log splitters - Part 2 Screw splitters (Incorporates Amendment A1 2009)《农用和林业机械设备 原木分裂机的安全 第2部分 螺旋分裂机 包含修改件A1-2009》.pdf

《EN 609-2-1999 en Agricultural and forestry machinery - Safety of log splitters - Part 2 Screw splitters (Incorporates Amendment A1 2009)《农用和林业机械设备 原木分裂机的安全 第2部分 螺旋分裂机 包含修改件A1-2009》.pdf》由会员分享，可在线阅读，更多相关《EN 609-2-1999 en Agricultural and forestry machinery - Safety of log splitters - Part 2 Screw splitters (Incorporates Amendment A1 2009)《农用和林业机械设备 原木分裂机的安全 第2部分 螺旋分裂机 包含修改件A1-2009》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN ICS 65.060.80 NO CO

2、PYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Agricultural and forestry machinery Safety of Log splitters Part 2: Screw splitters 609-2:1999 +A1:2009National foreword This British Standard is the UK implementation of EN 609-2:1999+A1:2009. It supersedes BS EN 609-2:2000 which is

3、withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. The UK participation in its preparation was entrus

4、ted to Technical Committee AGE/29, Forestry machinery. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compli

5、ance with a British Standard cannot confer immunity from legal obligations. BS EN 609-2:1999+A1:2009 Amendments/corrigenda issued since publication Date Comments 30 November 2009 Implementation of CEN amendment A1:2009; alignment of BSI and CEN publication dates This British Standard, having been pr

6、epared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 February 2000 BSI 2009 ISBN 978 0 580 62476 6 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 609-2:1999+A1 September 2009 ICS 65.060.80 Super

7、sedes EN 609-2:1999 English Version Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters Matriel agricole et forestier - Scurit des fendeuses de bches - Partie 2 : Fendeuses vis Land- und Forstmaschinen - Sicherheit von Holzspaltmaschinen - Teil 2: Schraubenspaltma

8、schinen This European Standard was approved by CEN on 27 August 1999 and includes Amendment 1 approved by CEN on 27 July 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard

9、without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other lang

10、uage made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finla

11、nd, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KO

12、MITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 609-2:1999+A1:2009: EEN 609-2:1999+A1:2009 (E) 2 Contents Foreword 3 1 Scope 4 2 Normative References . 4 3

13、Definitions 5 4 Safety requirements 5 4.1 Electrical equipment 5 4.2 Safety and reliability of control systems . 5 4.3 Starting and stopping 6 4.3.1 Electrically driven machines 6 4.3.2 Machines not powered by electricity . 6 4.4 Hydraulic equipment . 7 4.5 Log support 7 4.6 Protective measures agai

14、nst contact with the rotating tool . 7 4.6.1 Guarding from above 7 4.6.2 Lateral screw guarding . 7 4.6.3 Measures to prevent entanglement by the screw 9 4.6.4 Screw run-down time 9 4.7 Safety measures to prevent rotation of the log 9 4.8 Device for removing jammed logs . 9 4.9 Stability . 9 4.10 Gu

15、arding of mechanical drives 9 5 Verification of safety requirements 10 6 User information 10 6.1 Marking . 10 6.2 Warning notices . 11 6.3 Instruction handbook 11 Annex A (normative) List of hazards . 13 Annex ZA (informative) ! ! ! !Relationship between this European Standard and the Essential Requ

16、irements of EU Directive 98/37EC“ “ “ “ 18 Annex ZB (informative) ! ! ! !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ “ “ “ . 19 BS EN 609-2:1999+A1:2009EN 609-2:1999+A1:2009 (E) 3 Foreword This document (EN 609-2:1999+A1:2009) has been prepa

17、red by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010,

18、and conflicting national standards shall be withdrawn at the latest by March 2010. This document includes Amendment 1, approved by CEN on 2009-07-27. This document supersedes EN 609-2:1999. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Attention

19、 is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This European Standard has been prepared under a mandate given to CEN by the European Commissio

20、n and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ According to the CEN/CENELEC Internal Regulations, the national standards organiza

21、tions of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Roman

22、ia, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 609-2:1999+A1:2009EN 609-2:1999+A1:2009 (E) 4 Introduction The extent to which hazards are covered is indicated in the scope of this standard. In addition, machinery shall comply as appropriate with EN 2921 and EN 2922 for

23、hazards which are not covered by this standard. 1 Scope This European Standard specifies safety requirements, and their verification, for the design and construction of screw splitters with horizontal screws, designed to be used by one operator for splitting wood, irrespective of the nature of the p

24、ower source used. On a dual purpose circular saw for firewood/log splitting machine only the log splitter part of the machine is covered by this standard, for circular saws. For firewood saws see prEN 1870-6:1997. This standard describes methods for the elimination or reduction of risks arising from

25、 their use. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. The list of significant hazards dealt with is given in annex A. Annex A also indicates the hazards which have not been dealt with. This European Standard applies primarily to m

26、achines which are manufactured after the date of issue of the standard. 2 Normative References This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are l

27、isted hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. EN 292-1:1991, Safety of

28、 machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology EN 292-2:1991, Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles and specifications (including EN 292-2/A1:1995) EN 953:1997, Safety of machinery Guard

29、s General requirements for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design EN 982:1996, Safety of machinery - Safety requirements for fluid power systems and their components

30、- Hydraulics EN 1088:1995, Safety of machinery - Interlocking devices associated with guards - Principles for design and selection EN 60204-1:1997, Safety of machinery - Electrical equipment of machines; Part 1: General requirements (IEC 60204-1: 1997) EN 60529:1991, Degree of protection provided by

31、 enclosure (IP code) (IEC 529: 1989) EN 60947-4-1:1992, Low-voltage switchgear and controlgear; Part 4: Contactors and motor-starters; Section 1: Electromechanical contactors and motor-starters (IEC 60947-4-1: 1990) BS EN 609-2:1999+A1:2009EN 609-2:1999+A1:2009 (E) 5 EN 60947-5-1:1997, Low-voltage s

32、witchgear and controlgear; Part 5-1: Control circuit devices and switching elements; Electromechanical control circuit devices (IEC 60947-5-1 : 1997) prEN 1553:1999, Agricultural machinery - Agricultural self propelled, mounted, semi-mounted or trailed machines - Common safety requirements prEN 1870

33、-6:1997, Safety of woodworking machines - Circular sawing machines - Part 6: Firewood sawing machine/circular saw bench with manual loading and/or unloading HD 21.1 S1:1997, Polyvinyl chloride insulated cables - Polyvinyl of rated voltages up to and including 450/750 V - Part 1: General requirements

34、 HD 22.1 S3:1997, Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements 3 Definitions For the purposes of this European Standard, the definitions given in EN 292-1 shall apply together with the following definition: 3.1 Screw splitter A log splitting m

35、achine where the log is split by the action of a rotating, conical screw. To achieve splitting the log is pressed against the point of the screw (see figures 1a and 1b for an example). 4 Safety requirements 4.1 Electrical equipment The electrical equipment of electrically driven machines shall compl

36、y with EN 60204-1. The degree of protection of all electrical components shall be a minimum of IP 54 in accordance with EN 60529. See also 6.3 s) of this standard for the use of a portable residual current device (PRCD). 4.2 Safety and reliability of control systems Control systems shall be at least

37、 category 1 according to 6.2.2 of EN 954-1:1996. For the purpose of this standard, “safety related control systems“ means the system from and including the initial manual control or position detector to the point of input to the final actuator or element, e.g. motor. Safety related control systems o

38、f this machine include the following: starting; normal stopping; interlocking devices; interlocking with guard locking; initiation of the braking system. BS EN 609-2:1999+A1:2009EN 609-2:1999+A1:2009 (E) 6 For the purpose of this standard “well tried“ according to EN 954-1 means: a) for electrical c

39、omponents that they comply with the relevant standards such as: EN 60947-5-1:1991 (section 3) for control switches with positive opening operation used as mechanically actuated position detectors for interlocking guards and for relays used in auxiliary circuits; EN 60947-4-1 for electromechanical co

40、ntactors and motor starters used in main circuits; HD 22.1 S3 for rubber insulated cables; HD 21.1 S1 for polyvinyl chloride insulated cables if these cables are additionally protected against mechanical damage by positioning (e.g. inside frames); b) for electrical principles that they comply with t

41、he first four measures listed in 9.4.2.1 of EN 60204-1:1997. The circuits shall be “hardwired“. Electronic components alone do not fulfil category 1; c) for mechanical components that they comply with 3.5 of EN 292-2:1991; d) for mechanically actuated position detectors for guards that they are actu

42、ated in the positive mode and their arrangement/fastening and cam design/mounting comply with 5.2.2 and 5.3 of EN 1088:1995; e) for interlocking devices with guard locking that they are a minimum of type 3 according to table 1 of EN 1088:1995; f) for hydraulic components and systems that they comply

43、 with EN 982. 4.3 Starting and stopping 4.3.1 Electrically driven machines A control device for starting and stopping the machine shall be provided within the reach of the operator when he is in the operating position. If the machine is equipped with a mechanical brake (see 4.6.4), the control devic

44、e used for stopping shall comply at least with Category 0, in accordance with 9.2.2 of EN 60204-1:1992. If the machine is equipped with an electrical brake (see 4.6.4), the control device used for stopping shall comply at least with Category 1, in accordance with 9.2.2 of EN 60204-1:1992. If a Categ

45、ory 1 control device is provided for normal stopping, then the following disconnection sequence shall be executed : a) disconnection of the power supply to all drive mechanisms and subsequent activation of the brake ; b) disconnection of the power supply to the brake, after the braking process has b

46、een completed. NOTE: The control device meets also the requirements for emergency stop. 4.3.2 Machines not powered by electricity The machine shall be fitted with a device at the operating position capable to either stop the machine or, e.g. for PTO-driven machines, to disconnect the drive of the ma

47、chine. NOTE 1: This control device meets also the requirements for emergency stop. NOTE 2: The providing of a rope to disengage the power takeoff of the tractor does not fulfil this requirement. BS EN 609-2:1999+A1:2009EN 609-2:1999+A1:2009 (E) 7 4.4 Hydraulic equipment Hydraulic equipment (if provi

48、ded) shall comply with EN 982. Pressurised hoses, lines and components shall be located or shielded so that in the event of rupture, the fluid can not be discharged directly onto the operator when in the operating position. 4.5 Log support A support or holding device shall be provided for the log. T

49、his device shall be designed to allow the log to be split without the need for it to be held in position by the hands or feet. The device shall also prevent the log, or parts of it, falling onto the operator, when he is at the operating position before, during or after splitting. The feeding device (see 4.6.3) can perform the log supporting function. See figures 1a and 1b for an example.