EN 4165-018-2015 en Aerospace series - Connectors electrical rectangular modular - Operating temperature 175 continuous - Part 018 Protective cover for all receptacles series 2 - P.pdf

《EN 4165-018-2015 en Aerospace series - Connectors electrical rectangular modular - Operating temperature 175 continuous - Part 018 Protective cover for all receptacles series 2 - P.pdf》由会员分享，可在线阅读，更多相关《EN 4165-018-2015 en Aerospace series - Connectors electrical rectangular modular - Operating temperature 175 continuous - Part 018 Protective cover for all receptacles series 2 - P.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 4165-018:2015Aerospace series Connectors, electrical,rectangular, modular Operating temperature 175 CcontinuousPart 018: Protective cover for all receptaclesseries 2 Product standardBS EN 4165-018:2015 BRITISH STANDARDNational forewordThis British Standard is the UK im

2、plementation of EN 4165-018:2015.It supersedes BS EN 4165-018:2007 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on requ

3、est to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 89126 7ICS 49.060Compliance with a British Stand

4、ard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2015.Amendments issued since publicationDate Text affectedBS EN 4165-018:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4165-018

5、 July 2015 ICS 49.060 Supersedes EN 4165-018:2007English Version Aerospace series - Connectors, electrical, rectangular, modular -Operating temperature 175 C continuous - Part 018: Protective cover for all receptacles series 2 - Product standard Srie arospatiale - Connecteurs lectriques rectangulair

6、es modulaires - Temprature dutilisation 175 C continu - Partie 018 : Bouchon de vol pour toutes les embases srie 2 - Norme de produit Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 C konstant - Teil 018: Schutzkappe fr Steckdose, Serie 2 - Pr

7、oduktnorm This European Standard was approved by CEN on 5 March 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographi

8、cal references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility

9、 of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of

10、Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION

11、 EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4165-018:2015 EBS EN 4165-018:2015EN 4165-018:2015 (E) 2 Contents Page European f

12、oreword .3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Required characteristics .4 5 Protective cover .5 6 Designation 8 7 Marking .9 8 Technical specification .9 BS EN 4165-018:2015EN 4165-018:2015 (E) 3 European foreword This document (EN 4165-018:2015) has been prepared by the

13、 Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD,

14、 prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2016, and conflicting national standards shall be withdrawn at the latest by January 2016. Attention is d

15、rawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4165-018:2007. According to the CEN-CENELEC Internal Regulations, the na

16、tional standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, L

17、ithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4165-018:2015EN 4165-018:2015 (E) 4 1 Scope This European Standard defines the protective cover for all receptacles series 2 used in the f

18、amily of rectangular electrical connectors. The connector accessory bodies corresponding to those protective covers are defined in EN 4165-004, EN 4165-011 and EN 4165-025. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indisp

19、ensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN 4165-001, Aerospace series Connectors, electrical, r

20、ectangular, modular Operating temperature 175 C continuous Part 001: Technical specification EN 4165-002, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 002: Specification of performance and contact arrangements EN 4165-004, Aerospace series

21、 Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 004: Stackable mounting receptacle 2 and 4 modules, series 2 Product standard EN 4165-011, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 011: Flange m

22、ounting receptacle 2 and 4 modules, series 2 Product standard. EN 4165-025, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 025: Module receptacle Product Standard 3 Terms and definitions For the purposes of this document, the terms and defin

23、itions given in EN 4165-001 apply. 4 Required characteristics See Figure 1 for 2 modules, Figure 2 for 4 modules and Figure 3 for single module. BS EN 4165-018:2015EN 4165-018:2015 (E) 5 5 Protective cover 5.1 For 2 modules, classes W and F Mass max. = 18,5 g Dimensions in millimetres aactive thread

24、 bhexagonal drive Key 1 Unlosable cord 2 Eyelet (hole diameter min. = 3,4 mm, hole diameter max. = 4,5 mm) 3 Seal 4 Shield device 5 Cord length Figure 1 Protective cover for 2 modules BS EN 4165-018:2015EN 4165-018:2015 (E) 6 5.2 For 4 modules, classes W and F Mass max. = 22 g Dimensions in millimet

25、res aactive thread bhexagonal drive Key 1 Unlosable cord 2 Eyelet (hole diameter min. = 3,4 mm, hole diameter max. = 4,5 mm) 3 Seal 4 Shield device 5 Cord length Figure 2 Protective cover for 4 modules BS EN 4165-018:2015EN 4165-018:2015 (E) 7 5.3 For single module Mass max. = 11 g Dimensions in mil

26、limetres Key 1 Unlosable cord 2 Eyelet (hole diameter min. = 3 mm, hole diameter max. = 4,5 mm) 3 Seal Figure 3 Protective cover for single module BS EN 4165-018:2015EN 4165-018:2015 (E) 8 5.4 Protective cover for receptacle class See Table 1. Table 1 Class Description W Protective cover for recepta

27、cle with housing (shell) olive drab cadmium plated, aluminium alloy, 500 hours resistance to salt mist, maximum operating temperature 175 C continuous F Protective cover for receptacle with housing (shell) black nickel plated, aluminium alloy, 96 hours resistance to salt mist, maximum operating temp

28、erature 175 C continuous M Protective cover for receptacle with housing (shell) nickel plated, composite, 500 hours resistance to salt mist, maximum operating temperature 175 C continuous 6 Designation EXAMPLE 1 Description block ELECTRICAL CONNECTOR PROTECTIVE COVER FOR RECEPTACLE Identity block EN

29、4165F3B2G15 Number of the basic standard Class type (see Table 1) Type 3: protective cover for receptacle (see EN 4165-002) Size: A for receptacle 2 modules Size: B for receptacle 4 modules 1: without sealing device 2: with sealing device G: grounding device 00: without cord 05: with cord length of

30、50 mm 15 mm 10: with cord length of 100 mm 15 mm 15: with cord length 150 mm 15 mm BS EN 4165-018:2015EN 4165-018:2015 (E) 9 EXAMPLE 2 Description block ELECTRICAL CONNECTOR PROTECTIVE COVER FOR RECEPTACLE Identity block EN4165M3C Number of the basic standard Class type (see Table 1) Type 3: protect

31、ive cover for receptacle (see EN 4165-002) Size: C for receptacle single module With sealing and grounding devices With cord length of 75 mm 15 mm 7 Marking Unless there are other specific contractual requirements, the marking shall be in accordance with EN 2424, category P. 8 Technical specificatio

32、n See EN 4165-001. This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardizati

33、on products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standard

34、s -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide

35、 you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted Eur

36、opean and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription servic

37、es are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed

38、 daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Me

39、mbers. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your

40、 intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continua

41、lly improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI

42、 publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyri

43、ght, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW