EN 1430-2009 112 Bitumen and bituminous binders - Determination of particle polarity of bituminous emulsions《沥青和沥青粘合剂 沥青乳液的粒子极性的测定［使用 IP 292 2009］》.pdf

《EN 1430-2009 112 Bitumen and bituminous binders - Determination of particle polarity of bituminous emulsions《沥青和沥青粘合剂 沥青乳液的粒子极性的测定［使用 IP 292 2009］》.pdf》由会员分享，可在线阅读，更多相关《EN 1430-2009 112 Bitumen and bituminous binders - Determination of particle polarity of bituminous emulsions《沥青和沥青粘合剂 沥青乳液的粒子极性的测定［使用 IP 292 2009］》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 1430:2009 ICS 75.140, 91.100.50NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDBitumen andbituminous binders Determination ofparticle polarity ofbituminous emulsionsBS 2000-292:2009Copyright European Committee for Standardization Provided by IHS under lice

2、nse with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 30 April2009 BSI 2009ISBN 978 0 580 58850 1Amendments/corrigenda issued since publicationDate CommentsB

3、S EN 1430:2009National forewordThis British Standard is the UK implementation of EN 1430:2009. Itsupersedes BS EN 1430:2000 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PTI/13, Petroleum testing and terminology.A list of organizations represented on

4、this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Energy Institute, under

5、the brand of IP, publishes and sells all Parts of BS 2000, and all BS EN petroleum test methods that would be Part of BS 2000, both in its annual publication “Standard methods for analysis and testing of petroleum and related products and British Standard 2000 Parts” and individually.Further informa

6、tion is available from: Energy Institute, 61 New Cavendish Street, London W1G 7AR. Tel: 020 7467 7100. Fax: 020 7255 1472.Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14

7、30:2009EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 1430March 2009ICS 75.140; 91.100.50 Supersedes EN 1430:1999 English VersionBitumen and bituminous binders - Determination of particlepolarity of bituminous emulsionsBitumes et liants bitumineux - Dtermination de la polaritdes particules des mu

8、lsions de bitumeBitumen und bitumenhaltige Bindemittel - Bestimmung derTeilchenpolaritt von BitumenemulsionenThis European Standard was approved by CEN on 17 January 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

9、Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, Fre

10、nch, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, C

11、zech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROP

12、EN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1430:2009: ECopyright European Committee for Standardization Provided by IHS u

13、nder license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1430:2009EN 1430:2009 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Principle 4 5 Reagents and materials 4 6 Apparatus .5 7 Sampling .5 8 Pro

14、cedure .5 9 Expression of results 6 10 Test report 6 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1430:2009EN 1430:2009 (E) 3 Foreword This document (EN 1430:2009) has b

15、een prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting nati

16、onal standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document super

17、sedes EN 1430:1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icela

18、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or net

19、working permitted without license from IHS-,-,-BS EN 1430:2009EN 1430:2009 (E) 4 1 Scope This European Standard specifies a method for the determination of the particle polarity of bituminous emulsions. WARNING The use of this standard may involve hazardous materials, operations and equipment. This

20、standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2 Normative references The follo

21、wing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders - Sampling bituminou

22、s binders EN 12594, Bitumen and bituminous binders - Preparation of test samples EN ISO 3696, Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) ISO 5280, Xylene for industrial use Specification 3 Terms and definitions For the purposes of this document, the followin

23、g definition applies. 3.1 particle polarity sign of the electric charge carried by particles in ionic emulsions NOTE In cationic emulsions, particles have positive polarity. In anionic emulsions, particles have negative polarity. 4 Principle A direct or rectified current is passed through a bitumino

24、us emulsion between two parallel plate electrodes. Deposition of a layer of bitumen on the anode indicates negative polarity and that the emulsion is anionic. Deposition of particles on the cathode indicates positive polarity and that the emulsion is cationic. 5 Reagents and materials Use only reage

25、nts of recognized analytical grade and water conforming to grade 3 of EN ISO 3696. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1430:2009EN 1430:2009 (E) 5 5.1 Efficient

26、 rinsing agent Efficient rinsing agents or xylene, conforming to ISO 5280, can be used. 5.2 Propan-2-ol. 5.3 Ethanol, 96 % minimum or methylated spirit 99 %. 6 Apparatus Usual laboratory apparatus and glassware, together with the following: 6.1 Electrical circuit, (see Figure 1) consisting of the fo

27、llowing components: 6.1.1 Current source, capable of supplying a direct or rectified current of 8 mA at a potential of 4,5 V to 15 V for 30 min. 6.1.2 Milliammeter, with a full scale deflection of 10 mA. 6.1.3 Potentiometer. 6.1.4 Electrodes, two stainless steel plates approximately 100 mm long, 25

28、mm wide and 1,0 mm thick, with an insulating device to hold the plates parallel and 12 mm apart in the emulsion (see Figure 1). 6.1.5 Insulator, polytetrafluoroethylene resin square rod, virgin electrical grade, (12 2) mm long, (25 2) mm wide and (15 5) mm thick. 6.2 Glass beaker, 150 ml or 250 ml c

29、apacity. 6.3 Glass rod, approximately 100 mm long and 6 mm thick or other suitable device that is capable of insulating and suspending the electrode assembly in the emulsion. 6.4 Timing device, stop watch or other suitable device. 7 Sampling The laboratory sample shall be sampled in accordance with

30、EN 58 and shall be prepared in accordance with EN 12594. The sample shall be divided into two portions; in case of doubt concerning the results, both portions shall be tested. 8 Procedure 8.1 Preparation of electrodes Clean the electrodes (6.1.4) in the following sequence: wash with water; wash with

31、 propan-2-ol (5.2) or ethanol or methylated spirit (5.3); Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1430:2009EN 1430:2009 (E) 6 wash with rinsing agents or xylene (5.

32、1); wash with propan-2-ol (5.2) or ethanol (5.3); wash with water. 8.2 Pour sufficient emulsion into a beaker (6.2) to permit immersion of the electrodes to a depth of approximately 25 mm in the emulsion. Suspend the electrodes, separated by the insulator (6.1.5) from the glass rod. Immerse the elec

33、trodes to the required depth in the emulsion by placing the glass rod across the top of the beaker (6.3). NOTE Any apparatus capable of manual height adjustment and of insulating and suspending the electrodes in the emulsion may be used. 8.3 Connect the electrodes to the direct current source (6.1.1

34、), the gap between the 2 electrodes shall be equal to (12 2) mm, as shown on Figure 1. 8.4 Adjust the current to between 8 mA and 10 mA with the potentiometer (6.1.3) and start timing with the suitable timing device (6.4). Record the current used. 8.5 When the current drops to 2 mA, or at the end of

35、 30 min, whichever occurs first, disconnect the current source, and gently wash the electrodes in running water. 8.6 Observe the deposition of bituminous binder on the electrodes, and record the polarity. NOTE A cationic emulsion (with positive polarity) will deposit an appreciable layer of binder o

36、n the cathode (negative electrode). An anionic emulsion (with negative polarity) will deposit an appreciable layer of binder on the anode (positive electrode). 9 Expression of results Express the polarity of bituminous particles in the emulsion as positive or negative (see 8.6). 10 Test report The t

37、est report shall contain at least the following information: a) type and complete identification of the sample under test; b) reference to this European Standard; c) intensity of the current used (see 8.4); d) result of the test (Clause 9); e) any deviation, by agreement or otherwise, from the proce

38、dure specified; f) date of the test. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1430:2009EN 1430:2009 (E) 7 KEY 1. Current source 2. Potentiometer 3. Milliammeter d: d

39、istance between the two electrodes d = (12 2) mm Figure 1 Example of test apparatus layout with electrical circuit Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Energy Institut

40、eBuying Parts of BS 2000Orders for BS 2000 publications should be addressed to either:Energy Institute Library and Information Service61 New Cavendish StreetLondonW1G 7ARTel: +44 (0)20 7467 7100Fax: +44 (0)20 7255 1472www.energyinst.org.ukOrder standards securely via:www.energyinstpubs.org.ukor:Brit

41、ish Standards Institution Customer Services389 Chiswick High RoadLondonW4 4ALTel: +44 (0)20 8996 9001Fax: +44 (0)20 8996 7001www.bsi-Order hard copy standards securely via:www.bsi- exists in all BS 2000 publications. No part of this publication may be reproduced in any form without the prior permiss

42、ion in writing of BSI and the Energy Institute. Enquiries about copyright should be made to the Secretary of PTI/13 at the Energy Institute.PTI/13BS 2000 SeriesCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-