EN 13369-2013 en Common rules for precast concrete products《预制混凝土产品的通用规则》.pdf

《EN 13369-2013 en Common rules for precast concrete products《预制混凝土产品的通用规则》.pdf》由会员分享，可在线阅读，更多相关《EN 13369-2013 en Common rules for precast concrete products《预制混凝土产品的通用规则》.pdf（80页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13369:2013Common rules for precastconcrete productsBS EN 13369:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13369:2013. Itsupe

2、rsedes BS EN 13369:2004+A1:2006 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/524, Precast concrete products.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to includ

3、e all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 71109 1ICS 91.100.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British

4、 Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2013.Amendments issued since publicationDate Text affectedBS EN 13369:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13369 April 2013 ICS 91.100.30 Supersedes EN 13369:2004English Version

5、Common rules for precast concrete products Rgles communes pour les produits prfabriqus en bton Allgemeine Regeln fr Betonfertigteile This European Standard was approved by CEN on 21 January 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions

6、 for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in t

7、hree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards

8、bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia

9、, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for C

10、EN national Members. Ref. No. EN 13369:2013: EBS EN 13369:2013EN 13369:2013 (E) 2 Contents Page Foreword . 4 Introduction 6 1 Scope 7 2 Normative references . 7 3 Terms and definitions 8 3.1 General . 8 3.2 Dimensions. 9 3.3 Tolerances 9 3.4 Durability 9 3.5 Mechanical properties 10 4 Requirements .

11、 10 4.1 Material requirements 10 4.2 Production requirements . 11 4.3 Finished product requirements . 17 5 Test methods 23 5.1 Tests on concrete. 23 5.2 Measuring of dimensions and surface characteristics 24 5.3 Weight of the products 24 6 Evaluation of conformity 25 6.1 General . 25 6.2 Type testin

12、g 26 6.3 Factory production control 27 7 Marking . 31 8 Technical documentation 31 Annex A (informative) Concrete cover as regard to corrosion . 32 Annex B (informative) Concrete quality control. 34 Annex C (informative) Reliability considerations 37 Annex D (normative) Inspection schemes . 39 Annex

13、 E (informative) Assessment of compliance 47 Annex F This annex does not exist 49 Annex G (normative) Test of water absorption 50 Annex H (informative) Shape correlation factor for cores . 55 Annex I This annex does not exist . 56 Annex J (informative) Measurement of dimensions 57 Annex K (informati

14、ve) Prestressing losses 62 Annex L (informative) This annex does not exist 65 Annex M (informative) Technical documentation 66 Annex N (informative) Properties of indented bars and wire 68 Annex O (informative) Resistance to fire: recommendations for the use of EN 1992-1-2 69 BS EN 13369:2013EN 1336

15、9:2013 (E) 3 Annex P (informative) Survey of type testing. 70 Annex Q (informative) Use of reclaimed crushed and recycled coarse aggregates in concrete . 72 Bibliography 74 BS EN 13369:2013EN 13369:2013 (E) 4 Foreword This document (EN 13369:2013) has been prepared by Technical Committee CEN/TC 229

16、“Precast concrete products”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2013, and conflicting national standards shall be withdrawn at the l

17、atest by October 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13369:2004. The main technical chan

18、ges that have been made in this new edition are the following ones: a) Scope: precast concrete product made of heavyweight, light and normal concrete; concrete using fibres (steel, polymer or other) is also covered; b) Normative references have been updated while taking the Bibliography into account

19、; c) Terms and definitions have been reviewed; d) Requirements; e) New clause for reclaimed crushed and recycled coarse aggregates; f) New wording and requirements for the subclause “Curing (protection against drying out)”; g) New requirements: tensile strength, shrinkage, dry density; h) Production

20、s tolerances are revised; i) New clause on Performance related design; j) Evaluation of conformity; k) Type testing, new Annex P, Survey of type testing; l) Concrete strength, conformity criteria; m) Annex G, Test of water absorption; n) Annex Q, Use of reclaimed crushed and recycled coarse aggregat

21、es in concrete. EN 13369 is a common reference for the following group of specific product standards prepared by Technical Committee CEN/TC 229: EN 1168, Precast concrete products Hollow core slabs; EN 12737, Precast concrete products Floor slats for livestock; EN 12794, Precast concrete products Fo

22、undation piles; BS EN 13369:2013EN 13369:2013 (E) 5 EN 12839, Precast concrete products Elements for fences; EN 12843, Precast concrete products Masts and poles; EN 13198, Precast concrete products Street furniture and garden products; EN 13224, Precast concrete products Ribbed floor elements; EN 13

23、225, Precast concrete products Linear structural elements; EN 13693, Precast concrete products Special roof elements; EN 13747, Precast concrete products Floor plates for floor systems; EN 13748-1, Terrazzo tiles Part 1: Terrazzo tiles for internal use; EN 13748-2, Terrazzo tiles Part 2: Terrazzo ti

24、les for external use; EN 13978-1, Precast concrete products Precast concrete garages Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions; EN 14843, Precast concrete products Stairs; EN 14844, Precast concrete products Box culverts; EN 14991, P

25、recast concrete products Foundation elements; EN 14992, Precast concrete products Wall elements; EN 15037-1, Precast concrete products Beam-and-block floor systems Part 1: Beams; EN 15037-2, Precast concrete products Beam-and-block floor systems Part 2: Concrete blocks; EN 15037-3, Precast concrete

26、products Beam-and-block floor systems Part 3: Clay blocks; EN 15037-4, Precast concrete products Beam-and-block floor systems Part 4: Expanded polystyrene blocks; EN 15050, Precast concrete products Bridge elements; EN 15258, Precast concrete products Retaining wall elements; EN 15435 Precast concre

27、te products Normal weight and lightweight concrete shuttering blocks Product properties and performances; EN 15498, Precast concrete products Wood-chip concrete shuttering blocks Product properties and performances. According to the CEN-CENELEC Internal Regulations, the national standards organisati

28、ons of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta

29、, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13369:2013EN 13369:2013 (E) 6 Introduction This document is intended to outline the general common requirements applicable to a large variety of precast concrete pro

30、ducts manufactured in a factory environment. It acts as a reference standard for other standards to enable a more consistent approach to standardization in the field of precast concrete products and to reduce the variations brought about by a large number of standards produced in parallel by differe

31、nt groups of experts. At the same time, it allows those experts the flexibility to include variations in specific product standards where they are required. This standard has been produced as part of the total CEN programme for construction and refers to the relevant specifications of associated sta

32、ndards EN 206 (all parts) for concrete and EN 1992 for the design of concrete structures. The installation of some precast concrete products is dealt with by EN 13670. As it is not a harmonised standard, it may not be used on its own for the purpose of CE marking of precast concrete products. The de

33、sign of precast concrete products should be verified to ensure the fitness of their properties for the particular application, particular attention being paid to design co-ordination with other parts of the construction. BS EN 13369:2013EN 13369:2013 (E) 7 1 Scope This European Standard specifies th

34、e requirements, the basic performance criteria and the evaluation of conformity for unreinforced, reinforced and prestressed precast concrete products made of compact light-, normal- and heavyweight concrete according to EN 206-1 with no appreciable amount of entrapped air other than entrained air.

35、Concrete containing fibres for other than mechanical properties steel, polymer or other fibres is also covered. It does not cover prefabricated reinforced components of lightweight aggregate concrete with open structure. It may also be used to specify products for which there is no standard. Not all

36、 of the requirements (Clause 4) of this standard are relevant to all precast concrete products. If a specific product standard exists, it takes precedence over this standard. The precast concrete products dealt with in this standard are factory produced for building and civil engineering works. This

37、 standard may also be applied to products manufactured in temporary plants on site if the production is protected against adverse weather conditions and controlled following Clause 6 provisions. The analysis and design of precast concrete products is not within the scope of this standard but it does

38、 offer, for non-seismic zones, information about: the choice of partial safety factors defined by the pertinent Eurocode; the definition of some requirements for prestressed concrete products. 2 Normative references The following documents, in whole or in part, are normatively referenced in this doc

39、ument and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 206-1:20001), Concrete Part 1: Specification, performance, production and conformity EN

40、934-2, Admixtures for concrete, mortar and grout Part 2: Concrete admixtures Definitions, requirements, conformity, marking and labelling EN 1008, Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the con

41、crete industry, as mixing water for concrete EN 1097-6, Tests for mechanical and physical properties of aggregates Part 6: Determination of particle density and water absorption EN 1992-1-1:20042), Eurocode 2: Design of concrete structures Part 1-1: General rules and rules for buildings EN 1992-1-2:

42、20043), Eurocode 2: Design of concrete structures Part 1-2: General rules Structural fire design EN 10080:2005, Steel for the reinforcement of concrete Weldable reinforcing steel General 1) This document is impacted by the stand-alone amendments EN 206-1:2000/A1:2004 and EN 206-1:2000/A2:2005. 2) Th

43、is document is impacted by the corrigendum EN 1992-1-1:2004/AC:2010. 3) This document is impacted by the corrigendum EN 1992-1-2:2004/AC:2008. BS EN 13369:2013EN 13369:2013 (E) 8 prEN 10138-1, Prestressing steels Part 1: General requirements prEN 10138-2, Prestressing steels Part 2: Wire prEN 10138-

44、3, Prestressing steels Part 3: Strand prEN 10138-4, Prestressing steels Part 4: Bar EN 12350-7, Testing fresh concrete Part 7: Air content Pressure methods EN 12390-1, Testing hardened concrete Part 1: Shape, dimensions and other requirements for specimens and moulds EN 12390-2, Testing hardened con

45、crete Part 2: Making and curing specimens for strength tests EN 12390-3, Testing hardened concrete Part 3: Compressive strength of test specimens EN 12390-7, Testing hardened concrete Part 7: Density of hardened concrete EN 12504-1, Testing concrete in structures Part 1: Cored specimens Taking, exam

46、ining and testing in compression EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN ISO 717-1, Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation (IS

47、O 717-1) EN ISO 717-2, Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation (ISO 717-2) EN ISO 10456, Building materials and products Hygrothermal properties Tabulated design values and procedures for determining declared and design thermal value

48、s (ISO 10456) ASTM C173 / C173M - 10b, Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 General 3.1.1 precast concrete product product which is made of con

49、crete and manufactured in accordance with this standard or a specific product standard in a place different from the final destination of use, protected from adverse weather conditions during production and which is the result of an industrial process under a factory production control system and with the possibility of sorting before delivery Note 1 to entry: In relevant European Standards, the shorter