EN 12621-2006 en Machinery for the supply and circulation of coating materials under pressure - Safety requirements (Incorporates Amendment A1 2010)《压力下覆层材料的供应和循环用机器 安全要求 包含修改件A1-2.pdf

《EN 12621-2006 en Machinery for the supply and circulation of coating materials under pressure - Safety requirements (Incorporates Amendment A1 2010)《压力下覆层材料的供应和循环用机器 安全要求 包含修改件A1-2.pdf》由会员分享，可在线阅读，更多相关《EN 12621-2006 en Machinery for the supply and circulation of coating materials under pressure - Safety requirements (Incorporates Amendment A1 2010)《压力下覆层材料的供应和循环用机器 安全要求 包含修改件A1-2.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 12621:2006Machinery for the supply and circulation of coating materials under pressure Safety requirementsICS 87.100g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3

2、g38g50g51g60g53g44g42g43g55g3g47g36g58+A1:2010National forewordThis British Standard is the UK implementation of EN 12621:2006+A1:2010. It supersedes BS EN 12621:2006 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating

3、changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee MCE/3, Safeguarding of machinery, to Subcommittee MCE/3/8, Thermoprocessing equipment safety.A list

4、 of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from leg

5、al obligations.BS EN 12621:2006+A1:2010This British Standard was published under the authority of the Standards Policy and Strategy Committee on 17 February 2006 BSI 2010Amendments/corrigenda issued since publicationDate Comments 31 August 2010 Implementation of CEN amendment A1:2010ISBN 978 0 580 6

6、3164 1EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12621:2006+A1 June 2010 ICS 87.100 Supersedes EN 12621:2006English Version Machinery for the supply and circulation of coating materials under pressure - Safety requirements Installations dalimentation et de circulation de produits de revtem

7、ent sous pression - Prescriptions de scurit Frder- und Umlaufanlagen fr Beschichtungsstoffe unter Druck - Sicherheitsanforderungen This European Standard was approved by CEN on 9 December 2005 and includes Amendment 1 approved by CEN on 30 April 2010. CEN members are bound to comply with the CEN/CEN

8、ELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to an

9、y CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.

10、 CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloveni

11、a, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nati

12、onal Members. Ref. No. EN 12621:2006+A1:2010: EEN 12621:2006+A1:2010 (E) 2 Contents page Foreword 4Introduction . 51 Scope 62 Normative references 73 Terms and definitions . 94 List of significant hazards 124.1 General 124.2 Mechanical hazards . 124.3 Electrical hazards 134.4 Thermal hazards 134.5 N

13、oise hazards . 134.6 Vibration hazards . 134.7 Hazards generated by dangerous substances . 144.8 Fire and explosion hazards generated by coating and/or auxiliary materials under pressure . 144.9 Hazards caused by failure of energy supply 144.10 Hazards related to failure of control systems . 155 Saf

14、ety requirements and/or measures 155.1 General 155.2 Safety requirements and measures against mechanical hazards 155.3 Electrical safety requirements 165.4 Safety requirements and measures against thermal hazards 175.5 Safety requirements relating to noise . 185.6 Safety requirements relating to vib

15、ration . 185.7 Safety requirements against dangerous substances 185.8 Safety requirements and protective measures against fire and explosion . 195.9 Safety requirements against failure of energy supply . 215.10 Safety requirements against failure of control systems . 216 Verification of the safety r

16、equirements . 216.1 General 216.2 Mechanical 216.3 Electrical . 226.4 Thermal . 226.5 Noise . 236.6 Vibration . 236.7 Dangerous substances . 236.8 Fire and explosions . 236.9 Failure of energy supply . 236.10 Control systems . 247 Information for use 247.1 General 247.2 Instruction handbook 247.3 Ma

17、rking . 26Annex A (informative) National references to exposure limit values . 27Annex B (informative) Relationship between categories and zones . 29Annex C (informative) Classification of construction materials reaction to fire - National standards 30BS EN 12621:2006+A1:2010EN 12621:2006+A1:2010 (E

18、) 3 Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ . 31Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 94/9/EC 32Bibliography 33BS EN 12621:2006+A1:2010EN

19、 12621:2006+A1:2010 (E) 4 Foreword This document (EN 12621:2006+A1:2010) has been prepared by Technical Committee CEN/TC 271 “Surface treatment equipment Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication o

20、f an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall

21、not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2010-04-30. This document supersedes EN 12621:2006. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This European Standa

22、rd has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this European Standard.

23、According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland

24、, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 12621:2006+A1:2010EN 12621:2006+A1:2010 (E) 5 Introduction This European Standard is a type C standard as stated in EN ISO 12100. Th

25、is European Standard is part of a series of documents prepared by CEN/TC 271/WG2 specifying the health, safety and environmental protection requirements for devices, units and equipment for surface coating: EN 1953 “Atomising and spraying equipment for coating materials“; !EN 12621:2006+A1“ “Machine

26、ry for the supply and circulation of coating materials under pressure“; !EN 12757-1“ “Mixing machinery for coating materials“. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this European Standard. When provisions of

27、 this type C standard are different from those stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. BS EN 12621:2006+A1:2

28、010EN 12621:2006+A1:2010 (E) 6 1 Scope 1.1 This European Standard applies to the design and construction of machinery for the supply and circulation of coating and/or auxiliary materials under pressure in the following called “machine“ (see 3.1). The coating material is supplied by air pressure or a

29、irless. NOTE Machines covered by this European Standard may be linked with e.g. colour mixing machinery, atomising and spraying equipment, spray booths and stands and/or automated coating machinery. The pressure related parts of the machines covered are classified as no higher than category I under

30、article 9 of the Pressure Equipment Directive 97/23/EC. This European Standard deals with the significant hazards, hazardous situations and events relevant to the machinery for the supply and circulation of coating and/or auxiliary materials under pressure, when they are used as intended and under t

31、he conditions foreseen by the manufacturer (see Clause 4). Machinery for the supply and circulation of coating and/or auxiliary materials under pressure consists of the following equipment: pump units; pressure vessels; non-pressurised containers; interconnecting pipes and hoses flanges, nozzles, co

32、uplings, supports, lifting equipment etc.; agitators; filters; pulsation damping devices; all safety devices (e.g. level monitoring equipment); equipment for heating and/or cooling of the coating materials. The machine may be fixed or mobile. 1.2 This European Standard excludes: pressure related haz

33、ards of equipment classified as higher than category 1 under article 9 of the Pressure Equipment Directive 97/23/EC; atomising and spraying equipment as dealt with in EN 1953:1998 and the supply hoses for this equipment; atomising and spraying equipment as dealt with in EN 50144-2-7:2001, EN 50260-2

34、-7:2002 and the supply hoses for this equipment. 1.3 This European Standard does not apply to: !machinery for“ processing of foodstuffs and pharmaceuticals; BS EN 12621:2006+A1:2010EN 12621:2006+A1:2010 (E) 7 design and construction of pipes and hoses; design and construction of coating presses (see

35、 3.23); machinery for the supply of powder coating material. 1.4 This European Standard is not applicable to machinery for the supply and circulation of coating materials under pressure which are manufactured before the date of publication of this document by CEN. 2 Normative references The followin

36、g referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery Safety distance to

37、prevent danger zones being reached by the upper limbs EN 349:1993, Safety of machinery Minimum gaps to avoid crushing of parts of the human body EN 563:1994, Safety of machinery Temperatures of touchable surfaces Ergonomics data to establish temperature limit values for hot surfaces EN 619:2002, Con

38、tinuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of unit loads EN 809:1998, Pumps and pump units for liquids Common safety requirements EN 811:1996, Safety of machinery Safety distances to prevent danger zones being reached by the lower limbs E

39、N 842:1996, Safety of machinery Visual danger signals General requirements, design and testing EN 894-1:1997, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 1: General principles for human interactions with displays and control actuators EN 894-2:19

40、97, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 2: Displays EN 894-3:2000, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 3: Control actuators EN 953:1997, Safety of machinery Guards General requ

41、irements for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery Safety-related parts of control systems Part 1: General principles for design EN 971-1:1996, Paints and varnishes Terms and definitions for coating materials Part 1: General terms EN 981:1996, Saf

42、ety of machinery System of auditory and visual danger and information signals EN 982:1996, Safety of machinery Safety requirements for fluid power systems and their components Hydraulics EN 983:1996, Safety of machinery Safety requirements for fluid power systems and their components Pneumatics EN 1

43、037:1995, Safety of machinery Prevention of unexpected start-up BS EN 12621:2006+A1:2010EN 12621:2006+A1:2010 (E) 8 EN 1088:1995, Safety of machinery Interlocking devices associated with guards Principles for design and selection !EN 1127-1:2007“, Explosive atmospheres Explosion prevention and prote

44、ction Part 1: Basic concepts and methodology EN 1494:2000, Mobile or movable jacks and associated lifting equipment EN 1570:1998, Safety requirements for lifting tables prEN 1829-1, High pressure cleaners High pressure water jet machines Safety requirements Part 1: General description EN 1953:1998,

45、Atomising and spraying equipment for coating materials Safety requirements !EN 13237:2003, Potentially explosive atmospheres Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres“ EN 13445-1:2002, Unfired pressure vessels Part 1: General EN

46、13463-1:2001, Non-electrical equipment for potentially explosive atmospheres Part 1: Basic method and requirements EN 13463-5:2003, Non-electrical equipment intended for use in potentially explosive atmospheres Part 5: Protection by constructional safety “c“ EN 13478:2001, Safety of machinery Fire p

47、revention and protection EN 14462:2005, Surface treatment equipment Noise test code for surface treatment equipment including its ancillary handling equipment Accuracy grades 2 and 3 !EN 50050:2006“, Electrical apparatus for potentially explosive atmospheres Electrostatic hand-held spraying equipmen

48、t EN 50059:1990, Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing EN 50176:1996, Automatic electrostatic spraying installations for flammable liquid spraying material !EN 60079-0:2009, Explosive atmospheres Part 0: Equipment General requirements (IEC 60079-0:2007)“ !EN 60079-15:2005, Electrical apparatus for explosive gas atmospheres Part 15: Construction, test and marking of type of protection “n“ electrical apparatus (IEC 60079-15:2005)“ EN 60204-1:1997, Safety of machinery Electrical equ