EN 12207-2016 en Windows and Doors - Air Permeability - Classification《窗户和门-空气渗透性-分类》.pdf

《EN 12207-2016 en Windows and Doors - Air Permeability - Classification《窗户和门-空气渗透性-分类》.pdf》由会员分享，可在线阅读，更多相关《EN 12207-2016 en Windows and Doors - Air Permeability - Classification《窗户和门-空气渗透性-分类》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 12207:2016Windows and doors Airpermeability ClassificationBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 12207:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 12207:2016. It supersedes BS EN 12207:2000 which is

2、withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/538/1, Windows and doors.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract.

3、 Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 88020 9 ICS 91.060.50 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the author

4、ity of the Standards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 12207:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12207 December 2016 ICS 91.060.50 Supersedes EN 12207:1999English Version Windows and d

5、oors - Air permeability - Classification Fentres et portes - Permabilit lair - Classification Fenster und Tren - Luftdurchlssigkeit - Klassifizierung This European Standard was approved by CEN on 15 October 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipula

6、te the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Sta

7、ndard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the na

8、tional standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, S

9、lovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any me

10、ans reserved worldwide for CEN national Members. Ref. No. EN 12207:2016 EBS EN 12207:2016EN 12207:2016 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Classification . 4 4.1 General 4 4.2 Classification based on the air permeability related

11、to the overall area 4 4.3 Classification based on the air permeability related to the length of opening joint(s) . 4 4.4 Definition of the classes 4 4.5 Classification based on the overall area . 5 4.5.1 Classification for windows and pedestrian doorsets . 5 4.5.2 Classification for internal pedestr

12、ian doorsets . 5 4.6 Classification based on opening joint length. 6 4.6.1 Classification for windows and pedestrian doorsets . 6 4.6.2 Classification for internal pedestrian doorsets . 6 4.7 Relation between the classifications based on the overall area and the length of the opening joint . 6 5 Cla

13、ssification report . 7 Annex A (normative) Upper limits of classes for windows, external and internal pedestrian doorsets 8 BS EN 12207:2016EN 12207:2016 (E) 3 European foreword This document (EN 12207:2016) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardw

14、are and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest

15、by June 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12207:1999. The revision of this European Standard clarifie

16、s only the classification method and does not affect existing classification evidence of EN 12207:1999. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croati

17、a, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

18、 United Kingdom. BS EN 12207:2016EN 12207:2016 (E) 4 1 Scope This European Standard defines the classification of test results for: windows; and external and internal pedestrian doorsets; completely assembled, of any materials after testing in accordance with EN 1026. 2 Normative references The foll

19、owing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1026, Window

20、s and doors - Air permeability - Test method 3 Terms and definitions For the purposes of this document the terms and definitions given in EN 1026 apply. 4 Classification 4.1 General The classification is based on a comparison of the air permeability of the test specimen related to overall area and o

21、n the air permeability related to the length of opening joint(s). 4.2 Classification based on the air permeability related to the overall area The total air permeability through the test specimen, measured in accordance with EN 1026 is divided by its overall area and the result recorded in m3/(h m2)

22、. A range of classes is defined for air permeability related to the overall area. 4.3 Classification based on the air permeability related to the length of opening joint(s) The total air permeability through the test specimen, measured in accordance with EN 1026 is divided by the length of the openi

23、ng joints and the result recorded in m3/(h m). A range of classes is defined for air permeability related to the total length of opening joint(s). 4.4 Definition of the classes The reference air permeabilities for overall area and opening joint length are defined at a reference test pressure of 100

24、Pa. For other pressure steps, the following equation is used: 23100=100Pa pQQ where Q100is the reference air permeability in cubic metres per hour at a test pressure of 100 Pa; Q is the air permeability in cubic metres per hour (m3/h) at a test pressure p, (p in Pascal). BS EN 12207:2016EN 12207:201

25、6 (E) 5 The lines in Figure A.1 (for windows and pedestrian doorsets) and Figure A.2 (for internal pedestrian doorsets) defining the upper limits of each class are derived from the reference air permeabilities at 100 Pa related to the overall area and the length of opening joint (see 4.5 and 4.6). A

26、 specimen belongs to a specified class if the measured air permeability does not exceed the upper limit at any test pressure step in that class. 4.5 Classification based on the overall area 4.5.1 Classification for windows and pedestrian doorsets Table 1 Reference air permeability related to overall

27、 area Class Reference air permeability at Maximum test pressure 100 Pa Pa m3/(h m2) 1 50 150 2 27 300 3 9 600 4 3 600 NOTE This table also applies to internal pedestrian doorsets upon customers request. 4.5.2 Classification for internal pedestrian doorsets Table 2 Reference air permeability related

28、to overall area Class Reference air permeability at Maximum test pressure 100 Pa Pa m3/(h m2) A 50 100 B 27 100 C 9 150 D 3 150 BS EN 12207:2016EN 12207:2016 (E) 6 4.6 Classification based on opening joint length 4.6.1 Classification for windows and pedestrian doorsets Table 3 Reference air permeabi

29、lity related to opening joint length Class Reference air permeability at Maximum test pressure 100 Pa Pa m3/(h m) 1 12,50 150 2 6,75 300 3 2,25 600 4 0,75 600 NOTE This table also applies to internal pedestrian doorsets upon customers request. 4.6.2 Classification for internal pedestrian doorsets Ta

30、ble 4 Reference air permeability related to opening joint length Class Reference air permeability at Maximum test pressure 100 Pa Pa m3/(h m) A 12,50 100 B 6,75 100 C 2,25 150 D 0,75 150 4.7 Relation between the classifications based on the overall area and the length of the opening joint If a speci

31、men is classified according to the overall area and the length of the opening joint, which give: the same class, the specimen shall be classified in one and the same class; two adjacent classes, the specimen shall be classified in the most favourable class (with lower rate); a difference of two clas

32、ses, the specimen shall be classified in the mean class; a difference of more than two classes, the specimen shall not be classified. NOTE For windows without any opening parts, no classification regarding the length of the opening joint will be made. BS EN 12207:2016EN 12207:2016 (E) 7 If a window

33、or a pedestrian doorset does not reach at least class 1 respectively class A based on both the overall area and the length of opening joint, when tested either with positive or negative pressure, it shall not be classified. There shall be no individual classification for either positive or negative

34、pressure. Therefore it is necessary to evaluate each test separately. That means: positive pressure based on the overall area; negative pressure based on the overall area; positive pressure based on the length of opening joint, not applicable for fixed windows; negative pressure based on length of o

35、pening joint, not applicable for fixed windows. Every classification shall reach at least class 1 respectively class A. The overall classification is the numeral average of the two air permeability values (m3/h) at each pressure step tested according to EN 1026. The results, related to the overall a

36、rea and the length of opening joint, shall be summarized as stated above. But only if all test results have reached a classification of class 1 respectively class A or better an overall classification of class 1 respectively class A will be possible. 5 Classification report In addition to the inform

37、ation given in the test report, at least the following shall be recorded: the classification of the specimen according to: the overall area; the length of opening joint(s); the final classification of the specimen. BS EN 12207:2016EN 12207:2016 (E) 8 Annex A (normative) Upper limits of classes for w

38、indows, external and internal pedestrian doorsets Key Q1 total air permeability (m3/(h m2) (cubic metre per hour and per square metre) of overall area; Q2 total air permeability (m3/(h m) (cubic metre per hour and per metre) of opening joint(s); p pressure, in Pascal (Pa) 1 class 1 2 class 2 3 class

39、 3 4 class 4 Figure A.1 Upper limits of classes for windows and pedestrian doorsets BS EN 12207:2016EN 12207:2016 (E) 9 Key Q1 total air permeability in (m3/(h m2) (cubic metre per hour and per square metre) of overall area; Q2 total air permeability in (m3/(h m) (cubic metre per hour and per metre)

40、 of opening joints; p pressure, in Pascal (Pa); 1 class A 2 class B 3 class C 4 class D Figure A.2 Upper limits of classes for internal pedestrian doorsets This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other

41、 standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovato

42、rs and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose stand

43、ards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and

44、download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered f

45、rom our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has form

46、ally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion the

47、reof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1

48、device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal o

49、r internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.Subscr