EN 10305-4-2011 3750 Steel tubes for precision applications - Technical delivery conditions - Part 4 Seamless cold drawn tubes for hydraulic and pneumatic power systems《精密装置用钢管 交货技.pdf

《EN 10305-4-2011 3750 Steel tubes for precision applications - Technical delivery conditions - Part 4 Seamless cold drawn tubes for hydraulic and pneumatic power systems《精密装置用钢管 交货技.pdf》由会员分享，可在线阅读，更多相关《EN 10305-4-2011 3750 Steel tubes for precision applications - Technical delivery conditions - Part 4 Seamless cold drawn tubes for hydraulic and pneumatic power systems《精密装置用钢管 交货技.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 10305-4:2011Steel tubes for precisionapplications Technicaldelivery conditionsPart 4: Seamless cold drawn tubes forhydraulic and pneumatic power systemsCopyright European C

2、ommittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 10305-4:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 10305-4:2011.It supersedes BS EN 10305-4:2003

3、 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ISE/110, Steel Tubes, and Iron and Steel Fittings.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the nece

4、ssaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 67397 9ICS 77.140.75Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Comm

5、ittee on 28 February 2011.Amendments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 10305-4:2011EUROPEAN STANDARD NORME EUROPENNE

6、 EUROPISCHE NORM EN 10305-4 January 2011 ICS 77.140.75 Supersedes EN 10305-4:2003English Version Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems Tubes de prcision en acier - Conditions techniques de

7、livraison - Partie 4: Tubes sans soudure tirs froid pour circuits hydrauliques et pneumatiques Przisionsstahlrohre - Technische Lieferbedingungen - Teil 4: Nahtlose kaltgezogene Rohre fr Hydraulik- und Pneumatik-Druckleitungen This European Standard was approved by CEN on 11 December 2010. CEN membe

8、rs are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicatio

9、n to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Manageme

10、nt Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherland

11、s, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in an

12、y form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10305-4:2011: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 10305-4:2011EN 10305-4:2011

13、(E) 2 Contents Page Foreword 41 Scope 52 Normative references 53 Terms and definitions .64 Symbols 75 Classification and designation .75.1 Classification 75.2 Designation 76 Information to be supplied by the purchaser .76.1 Mandatory information 76.2 Options .76.3 Example of an order 87 Manufacturin

14、g process .87.1 Steelmaking process .87.2 Tube manufacture and delivery conditions 88 Requirements .98.1 General 98.2 Chemical composition 98.3 Mechanical properties 108.4 Appearance and soundness 108.5 Dimensions and tolerances . 118.5.1 Outside diameter, inside diameter and wall thickness . 118.5.

15、2 Lengths 118.5.3 Straightness 158.5.4 Preparation of ends 159 Inspection 169.1 Type of inspection 169.2 Inspection documents 169.2.1 Type of inspection documents 169.2.2 Content of inspection documents. 169.3 Summary of inspection and testing 1710 Sampling 1710.1 Test unit . 1710.2 Preparation of s

16、amples and test pieces . 1810.2.1 General . 1810.2.2 Test pieces for the tensile test 1810.2.3 Test pieces for the flattening or drift expanding test 1810.2.4 Test pieces for roughness measurement 1811 Test methods . 1811.1 Tensile test 1811.2 Flattening test . 1811.3 Drift expanding test 1911.4 Dim

17、ensional inspection . 1911.5 Roughness measurement 1911.6 Visual examination . 1911.7 Non-destructive testing 19Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 10305-4:2011

18、EN 10305-4:2011 (E) 3 11.7.1 Testing on longitudinal imperfections 1911.7.2 Leak tightness test 2011.8 Retests, sorting and reprocessing 2012 Marking . 2013 Protection and packaging. 2013.1 Protection . 2013.2 Packaging . 21Annex A (informative) Significant technical changes between this European St

19、andard and the previous edition of EN 10305-4 22Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC 23Bibliography 24Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduc

20、tion or networking permitted without license from IHS-,-,-BS EN 10305-4:2011EN 10305-4:2011 (E) 4 Foreword This document (EN 10305-4:2011) has been prepared by Technical Committee ECISS/TC 110 “Steel tubes, and iron and steel fittings”, the secretariat of which is held by UNI. This European Standard

21、 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2011, and conflicting national standards shall be withdrawn at the latest by July 2011. Attention is drawn to the possibility that some of the elements of this docum

22、ent may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 10305-4:2003. Annex A provides details of significant technical changes between this European Standard and the previous edition. This d

23、ocument has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 97/23/EC. For relationship with EU Directive 97/23/EC, see informative Annex ZA, which is an integral part of this document.

24、EN 10305, Steel tubes for precision applications Technical delivery conditions, consists of the following parts: Part 1: Seamless cold drawn tubes; Part 2: Welded cold drawn tubes; Part 3: Welded cold sized tubes; Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems; Part 5: W

25、elded cold sized square and rectangular tubes; Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium

26、, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Copyright Europe

27、an Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 10305-4:2011EN 10305-4:2011 (E) 5 1 Scope This European Standard specifies the technical delivery conditions for seamless cold drawn steel t

28、ubes of circular cross section used in hydraulic and pneumatic power systems with specified outside diameter D 80 mm. Tubes according to this document are characterised by having precisely defined tolerances on dimensions and a specified maximum surface roughness. The allowed pressure rates and uppe

29、r temperatures are the responsibility of the customer in accordance with the state of the art and in application of the safety coefficients specified in the applicable regulations, codes or standards. Concerning the lower temperature range applicability the impact energy requirements are given at 0

30、C. NOTE Once this standard is published in the Official Journal of the European Union (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this standard and does not presume adequacy

31、of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done. 2 Norma

32、tive references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10020:2000, Definition and cla

33、ssification of grades of steel EN 10021:2006, General technical delivery conditions for steel products EN 10027-1, Designation systems for steels Part 1: Steel names EN 10027-2, Designation systems for steels Part 2: Numerical system EN 10052:1993, Vocabulary of heat treatment terms for ferrous prod

34、ucts EN 10168, Steel products Inspection documents List of information and description EN 10204:2004, Metallic products Types of inspection documents EN 10256, Non-destructive testing of steel tubes Qualification and competence of level 1 and 2 non-destructive testing personnel EN 10266:2003, Steel

35、tubes, fittings and structural hollow sections Symbols and definitions of terms for use in product standards EN ISO 377, Steel and steel products Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997) EN ISO 2566-1, Steel Conversion of elongation values Part 1: Car

36、bon and low alloy steels (ISO 2566-1:1984) EN ISO 4287, Geometrical product specifications (GPS) Surface texture: Profile method Terms, definitions and surface texture parameters (ISO 4287:1997) Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo r

37、eproduction or networking permitted without license from IHS-,-,-BS EN 10305-4:2011EN 10305-4:2011 (E) 6 EN ISO 6892-1, Metallic materials Tensile testing Part 1: Method of test at room temperature (ISO 6892-1:2009) EN ISO 8492, Metallic materials Tube Flattening test (ISO 8492:1998) EN ISO 8493, Me

38、tallic materials Tube Drift expanding test (ISO 8493:1998) EN ISO 10893-1, Non destructive testing of steel tubes Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leak-tightness instead of the hydrostatic tes

39、t (ISO 10893-1:2011) EN ISO 10893-2:2011., Non destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011) EN ISO 10893-3:2011, Non destructive testing of steel tubes

40、Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transversal imperfections (ISO 10893-3:2011) EN ISO 10893-10:2011, Non destructive testing of steel tubes Part 10: Automated

41、full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transversal imperfections (ISO 10893-10:2011) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 10020:2000, EN 1

42、0021:2006, EN 10052:1993, EN 10266:2003 and the following apply. 3.1 employer organization for which a person works on a regular basis NOTE The employer can be either the tube manufacturer or a third party organization providing non-destructive testing (NDT) services. 3.2 manufacturer party to produ

43、ce and to deliver tubes in accordance with this document NOTE Where tubes are delivered by a supplier, see EN 10021:2006, Clause 6. 3.3 imperfection discontinuity in the wall or on the pipe surfaces detectable by methods described in this document NOTE Imperfections with a size complying with the ac

44、ceptance criteria specified in this document are considered to have no practical implication on the intended use of the product. 3.4 defect imperfection of a size not complying with the acceptance criteria specified in this document NOTE Defects are considered to adversely affect or limit the intend

45、ed use of the product. 3.5 mother tube length of tube produced in the final cold drawing process Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 10305-4:2011EN 10305-4:2011

46、 (E) 7 4 Symbols For the purposes of this document, the symbols in EN 10266:2003 apply. 5 Classification and designation 5.1 Classification In accordance with the classification system in EN 10020:2000, the steel grades given in Table 1 are non-alloy quality steels. 5.2 Designation For the tubes cov

47、ered by this document, the steel designation consists of the number of this document (EN 10305-4) plus either: a) the steel name in accordance with EN 10027-1; or b) the steel number in accordance with EN 10027-2. 6 Information to be supplied by the purchaser 6.1 Mandatory information The following

48、information shall be obtained by the manufacturer at the time of enquiry and order: a) quantity (mass or total length or number); b) term “tube“; c) dimensions (outside diameter and inside diameter or other pair of dimensions) (see 8.5.1.1 and Table 4); d) steel designation (see 5.2); e) type of tube length (see 8.5.2); f) type of inspection certificate (see 9.1). 6.2