DOD A-A-54106-1990 ENVELOPE DRUG DISPENSING (POLYETHYLENE)《药品分配封袋(聚乙烯)》.pdf
《DOD A-A-54106-1990 ENVELOPE DRUG DISPENSING (POLYETHYLENE)《药品分配封袋(聚乙烯)》.pdf》由会员分享,可在线阅读,更多相关《DOD A-A-54106-1990 ENVELOPE DRUG DISPENSING (POLYETHYLENE)《药品分配封袋(聚乙烯)》.pdf(4页珍藏版)》请在麦多课文档分享上搜索。
1、A-A-SLiLOb 81 m 9979774 0052743 3 m A-A-5 4 1 O 6 9 March 1990 COMMERCIAL ITEM DESCRIPTION ENVELOPE, DRUG DISPENSING (Polyethylene) The General Services Admipistration has authorized the use of this Commercial Item Description. This Commercial Item Description covers a polyethylene drug dispensing e
2、nvelope. Salient characteristics: The drug dispensing envelope shall be a self-sealing, single- wall, polyethylene envelope. The envelope shall have a width of 3.0 inches plus or minus 1/2 inch and a length of 5.0 inches plus or minus 1/2 inch, with a wall thickness of 0.004 inch minimum. The envelo
3、pe shall be the open-end type with the opening at one end only. The envelope shall be provided with an interlocking seal closure which protects the contents from moisture. The envelope shall be capable of being easily opened from the seal closure end. The envelope shall be provided with a white bloc
4、k panel for providing medication dosage instructions. The panel shall accept ink or pencil easily and clearly without smearing. The envelope shall be free of.tears, splits, slits, holes, wrinkles, sharp creases, blisters, or chafed spots. The envelope shall be furnished free of grease, oil, dirt, or
5、 other contamination. AMSC N/A FSC 8105 I DISTRIBUTION STATEMENT A. Approved for public release; , distribution is unlimited. Licensed by Information Handling Services_I_ A-A-541Ob 81 m 7979774 0052744 5 m A-A-54 106 Workmanship. The drug dispensing envelope shall be free from defects which detract
6、from its appearance or impair its serviceability. Unit. Package (PG). One package containing one thousand envelopes, as specified, constitutes one unit. Quality Assurance Provisions. Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is respon
7、sible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Gove
8、rnment. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. Records. Records of examinations and tests performed by or for the contractor sha
9、ll be maintained by the contractor and made available to the Government upon the Governments request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate. Inspection. Inspection, as used
10、 herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item. Samplinq for tests. Sampling for tests (dimensional) shall
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DODAA541061990ENVELOPEDRUGDISPENSINGPOLYETHYLENE 药品 分配 聚乙烯 PDF

链接地址:http://www.mydoc123.com/p-701715.html