DOD A-A-53931-1989 CLAMP COARCTATION (GLOVER)《收缩夹子》.pdf

《DOD A-A-53931-1989 CLAMP COARCTATION (GLOVER)《收缩夹子》.pdf》由会员分享，可在线阅读，更多相关《DOD A-A-53931-1989 CLAMP COARCTATION (GLOVER)《收缩夹子》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-5 3 93 1 5 July 1989 COMMERCIAL ITEM DESCRIPTION CLAMP, COARCTATION, (Glover) The General Services Administration has authorized the use of this commercial item description. This commerical item description covers straight and angular clamps of the Glover design suitable for use in cardiovascula

2、r surgical procedures. Salient characteristics: General. Coarctation clamps shall be of the Glover design having a 1 x 2 row jaw profile with serrated teeth that interdigitate. rows of teeth shall be matched to provide a firm non-slip grasp without trauma to tissue. Clamps shall have finger rings, r

3、atchets and box locks as defined in ASTM Designation F921. Material. Material of the clamps shall be Class 4 corrosion- resistant steel in accordance with ASTM Designation F899. The Style, design and dimensons. Clamps shall be in accordance with Defense Personnel Support Center (DPSC) Drawing No. 22

4、251 for style, design and dimensions. Straight clamps shall be annotated as type I and angular clamps as type II. Hardness. Clamps shall have a Rockwell Hardness C scale (HRC) of 40 to 48 when tested in accordance with ASTM Designation E18 or E92 whichever is applicable. Conversion of hardness value

5、s shall be in accordance with ASTM Designation E140. Finish. Clamps shall have a mirror or satin finish. Passivation. Corrosion resistance. plating of copper when tested for corrosion resistance in accordance with ASTM Designation F1089. Performance. F1026 for physical and performance requirements.

6、Clamps shall be properly passivated. Clamps shall show no signs of .corrosion or Clamps shall be in accordance with ASTM Designation AMSC N/A FSC 6515 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitte

7、d without license from IHS-,-,-A-A-53 9 3 1 Identification marking. Contractors name or trademark and the word “stainless“. Foreign manufactured clamps shall bear the name of the country o? origin. Clamps shall be legibly marked with the Workmanship. Clamps shall be in accordance with ASTM Designati

8、on fi026 ?or workmanship, finish and appearance. Visual and dimensional examination. Clamps shall be examined to verify that design, construction and workmanship are in accordance wfth applicable requirements. Materials. The supplier shall be responsible for performing tests to assure that materials

9、 are in accordance with requirements. - Unit. Each (EA). One clamp, as specifiedr constitutes one unit. QualiQ Assurance Provisions. Responsibility for Inspection. Unless otherwise specified in the contract or purchaic;e ordec, the contractor is responsible for the performance of all inspection requ

10、irements as specieied herein, Except as otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable for the perEormance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to per

11、form any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services eanform to prescribed requirements, Records. Records of examinations and tests peEformed by or for the contractor shall be maintained by the contractor and made avai

12、lable to the Gavernment upon the Governments request, at any time, or from time to timer during the performance of the contract and for a period of three years after: delivery OE the supplies to which such recoxds relate . Enspeetion. Inspection, as used herein, is defined as both examination (such

13、as visual or auditory investigation without the use of special laboxatory appliances or procedures) and testing Cdeterminatlon by technical means of physical and chemical properties) of the item. - SnmGng for examination, Sampling of examination shall be conducted in accorance with MIL-STD-105 and a

14、s specified herein. nit if product for examination purposes shall be-one clamp, Sampling shall be inspection level II with an acceptable quality level (AQL) of 1.0. Examination. Clamps shall be examined to determine compliance with all specification requirements. 2 Provided by IHSNot for ResaleNo re

15、production or networking permitted without license from IHS-,-,-Sampling for tests. Sampling for tests shall be conducted in accordance with MIL-STD-105 and as specified herein. Unit of product for test purposes shall be one clamp. Sampling shall be inspection level 5-2 with an AQL of 1.0. A-A-53931

16、 b5 W 9999974 0032515 O W A-A-5 3 93 1 Tests. Tests shall be conducted -to determine compliance with specification requirements. Where feasible, the same sample shall be used for the determination of two or more test characteristics. Contractor certification. The contractor shall certify that the pr

17、oduct offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwis

18、e provided for under the provisions of the contract. Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerances specified using conversion tables contained in the latest re

19、vision of Federal Standard No. 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is

20、acceptable. The contracting officer has the option of accepting or rejecting the product. Regulatory requirements. Federal Food, Drug and Cosmetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contr

21、actor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subc

22、ontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations. Recovered materials. The offeror/contractor is encouraged to use recovered material in accordance with Public Law 94-580, as amended, and as implemented by Federal Acq

23、uisition Regulation Subpart 23.4 to the maximum extent practical. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-53931 b5 9799974 00325lb i! 4 J r-A4 3 9 3 1 ?reservation, packaging, packing, labeling, and marking, Unless atherwise specified,

24、preservation, packaging, and packing shall be to degree of piotection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment: mm the supply source to the receiving activity, plus reshipment fiom receiving activity, and shall conf

25、orm to applicable carriers rules and regulations, Intermediate and exterioi: package quantities and labeling and marking shall be as specified in the contract and/or ozder, NOTE: document z The following National Stock Number are covered by this NSN - 6515-01-139-8190 6515-01-139-8191 ITEM DESCRIPTI

26、ON CLAMP, COARCTATION, Glover straight CLAMP, COARCTATIONI Glover Angular Ordexing data (ntermediate/exterior package quantities and labeling and marking must be specified in the contract and/or order). MILITARY INTERESTS: Preparing Activity: Custodians: Army - MD Navy - MS Air: ForCe - 03 DD-MB Agent: DLA-DM CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS PHS FDA-MPQAS Project No. 6595-4618 *U.$. GOVERNMENT FRINTING OFFICE1 HU9 - 604433/U7W U Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-