DLA MS27508 REV H-2008 CONNECTORS RECEPTACLE ELECTRICAL BACK PANEL BOX MOUNTING FLANGE CRIMP TYPE BAYONET COUPLING SERIES II.pdf

《DLA MS27508 REV H-2008 CONNECTORS RECEPTACLE ELECTRICAL BACK PANEL BOX MOUNTING FLANGE CRIMP TYPE BAYONET COUPLING SERIES II.pdf》由会员分享，可在线阅读，更多相关《DLA MS27508 REV H-2008 CONNECTORS RECEPTACLE ELECTRICAL BACK PANEL BOX MOUNTING FLANGE CRIMP TYPE BAYONET COUPLING SERIES II.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、INCH-POUNDMS27508H 24 November 2008 SUPERSEDING MS27508G 12 July 2002 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, BACK PANEL, BOX MOUNTING FLANGE, CRIMP TYPE, BAYONET COUPLING, SERIES II Reactivated after 24 May 2004 and may be used for new and existing designs and acquisitions.Th

2、is specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle. AMSC N/A FSC 5935 Provided by IHSNot for ResaleNo reproduc

3、tion or networking permitted without license from IHS-,-,-MS27508H Shell size F max L max R BSC S max T +.010 -.005 AB max 8 .297 .828 .547 10 .3595 .954 .672 12 .406 1.047 .844 14 .453 1.141 .969 16 .4845 1.234 1.094 18 .146 .531 1.328 1.219 20 .578 1.453 1.344 22 .625 1.578 .120 1.469 24 .168 .250

4、 .6875 1.703 .147 1.594 FIGURE 1. Receptacle Continued. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27508H Inches mm Inches mm Inches mm Inches mm .005 .13 .203 5.16 .672 17.07 1.344 34.14 .007 .18 .223 5.66 .6875 17.45 1.391 35.33 .008 .20 .

5、250 6.35 .828 21.03 1.453 36.91 .010 .25 .297 7.54 .844 21.44 1.469 37.31 .011 .28 .322 8.18 .954 24.23 1.516 38.51 .012 .30 .3595 9.13 .969 24.61 1.578 40.08 .036 .91 .406 10.31 1.047 26.59 1.594 40.49 .058 1.47 .447 11.35 1.078 27.38 1.641 41.68 .06 1.5 .453 11.51 1.094 27.79 1.703 43.26 .120 3.05

6、 .4845 12.31 1.141 28.98 1.766 44.86 .139 3.53 .531 13.49 1.219 30.96 1.891 48.03 .146 3.71 .547 13.89 1.234 31.34 2.016 51.21 .147 3.73 .578 14.68 1.266 32.16 2.204 55.98 .168 4.27 .625 15.88 1.328 33.73 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information onl

7、y. 3. For main key and key positions, see MIL-DTL-38999. 4. The gauge feature for GG shall be .010 inch (0.25 mm) smaller than the MMC size at basic location. 5. Dimensioning and tolerances are in accordance with ASME-Y14.5M. 6. Maximum panel thickness including mounting hardware. FIGURE 1. Receptac

8、le Continued. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27508H REQUIREMENTS: Dimensions and configurations: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. Mating connectors: MS27473, MS27480, MS27484 and MS27500. Procure

9、ment specification: MIL-DTL-38999. Insert arrangements: See MIL-STD-1560. Part or Identifying Number (PIN) example: MS27508 E 24 F 61 P AMS number Class Shell size Finish Insert arrangement Contact style Polarizing positions no letter is required for normal. Changes from previous issue. Marginal not

10、ations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MS27473 MS27480 MS27484 MS27500 MIL-STD-1560 ASME-Y14.5M 4 Provided by IHSNot for

11、ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27508H CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA CC Navy AS Air Force 85 (Project 5935-2008-050) DLA CC Review activities: Army AR, MI Navy EC, MC, OS Air Force 19, 99 DLA IS NOTE: The activities liste

12、d above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-