DLA MIL-STD-1353B-1980 ELECTRICAL CONNECTORS PLUG-IN SOCKETS AND ASSOCIATED HARDWARE SELECTION AND USE OF.pdf
《DLA MIL-STD-1353B-1980 ELECTRICAL CONNECTORS PLUG-IN SOCKETS AND ASSOCIATED HARDWARE SELECTION AND USE OF.pdf》由会员分享,可在线阅读,更多相关《DLA MIL-STD-1353B-1980 ELECTRICAL CONNECTORS PLUG-IN SOCKETS AND ASSOCIATED HARDWARE SELECTION AND USE OF.pdf(261页珍藏版)》请在麦多课文档分享上搜索。
1、SUPERSEDING 19 March 1975 Mll-STD-1353A MILITARY STANDARD ELECTRICAL CONNECTORS, PLUG4N SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2 July 1980 DEPARTMENT OF DEFENSE Washington, DC 20301 Elect
2、rical Connectors, Plug-In Sockets, and Associated Hardware, Selection and Use of MIL-STD-1353B. 1. This Military Standard is approved for use by all Departments and Agencies of the Department of Defense. 2. Beneficial comments (reconrmendations, additions, deletions) and pertinent data which may be
3、of use in improving this document should be addressed to: Commander, Naval Electronic Systems Command, Attn: Code 5043, Washington, DC 20360, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. ii - Provided by
4、IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1353B m 9999911 0292208 466 m MIL-Sl“1353B 2 July 1980 FOREWORD This standard prov:-.des selected electrical connector and plug-in socket types and associated hardware which are approved for use in the desi
5、gn of military equipment. The selection guidance contained in this standard is to assist in guiding the project engineer to the proper connector series. The criteria for inclusion of electrical connector types and associated hardware in this standard are as follows: (a) The electrical connector and
6、associated hardware shall be suitable for use in military equipment. (b) Electrical connectors and associated hardware shall be covered by Government specifications. (c) Electrical connectors and associated hardware shall be available for procurement. (d) Electrical connectors and associated hardwar
7、e shall be suitable for multiple applications. (e) Electrical connectors and associated hardware shall be approved for listing or listed on applicable qualified products list. iii “ -y- =. - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-135
8、3B m 9999933 OE92203 3T2 m MIL-STW1353B 2 July 1980 CONTENTS Paragraph 1. 1.1 1.2 2. 3. 4. 4.1 4.1.1 4.2 5. 5.1 5.2 5.3 5.3.1 Section 100 200 300 400 GENERALREQUIRPIENTS- 15 Choice of electrical connector and plug-in socket types and associated hardware- - - - - - - - - - - - 15 Procurement informat
9、ion- - - - - - - - - - - - - - - - 15 Conflict of requirements - - - - - - - - - - - - - - - 15 DETAIL REQUIREMENTS 16 Detail requirements 16 Selection guidance 16 Principal applications 16 Multicontact connectors- - - - - - - - - - - - - - - - 16 SECTIONS MOLTICONTACT CONNECTORS RADIO FREQUENCY CON
10、NECTORS ASSOCIATED CONNECTOR HARDWARE PLUG-IN SOCKETS I 100.1 200 * 1 300.1 400.1 iv Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1353B m 99999L1 0292458 044 MIGSTD-1353B 2 July 1980 - 1. SCOPE 1.1 Scope. This standard establishes requirem
11、ents for selection of electrical con- nectors, plug-in sockets, and their associated hardware, shown in detail in sections 100, 200, 300, and 400, for use in military equipment. Included are the following: (a) Selected electrical connector types and associated hardware chosen jointly by the Departme
12、nts of the Army, the Navy, and the Air Force for use in the design of military equipment. (b) Guides for the choice and application of electrical connectors and asso- ciated hardware for use in military equipment. Complete detailed requirements for electrical connectors, plug-in sockets, and asso- c
13、iated hardware listed in this standard are covered in the applicable specification sheets or MS sheets (see 4.2). When it has been determined that equipment requirements cannot be met by using the connector styles or characteristics listed in this standard, the design engineer with the approval of t
14、he cognizant military activity, should select from the applicable connector specification, styles or characteristics not listed herein 1.2 Purpose of standard. The purpose of this standard is to promote the use of standard parts for new equipment design. The standard parts cover the majority of uses
15、 and are arranged in a form for quick reference and selection. The applicable connector specification shall be used for specific design details. 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1353B 2 July 1980 2. REFERENCED DOCUMENTS 2.1 I
16、ssues of documents. The following documents of the issue in effect on date of invitation for bids or request for proposal, form a part of this standard to the extent specified herein. SPECIFICATIONS FEDERAL WC596 MILITARY MIL-C-17 MIL-C-3432 MIL-C-5015 MIL- C- 2109 7 MIL-C-22992 MIL-C-24308 MIL-C-26
17、482 MIL-C-28731 MIL-C-28748 MIL-C-28804 MIL-C-38999 MIL-C-39012 MIL-C-39024 MIL-C-39029f4 MIL-C-39029 f 5 - Connector, Plug, Receptacle and Cable Outlet, Electrical Power, General Specification for. - Cable, Radio Frequency, Flexible and Semirigid, General - Cable and Wire, Electrical (Power and Con
18、trol; Semiflexible, Flexible and Extra-flexible, 300 and 600 Volts). - Connectors, Electrical, Circular Threaded, General Specification for. Specification for - Connector, Electrical, Printed Wiring Board, General Purpose, General Specification for - Connectors, Plugs, and Receptacles, Electrical, W
19、aterproof, Quick Disconnect, Heavy Duty Type, General Specification for. - Connectors, Electrical, Rectangular, Miniature Polarized Shell, Rack and Panel, General Specification for. - Connectors, Electrical (Circylar, Miniature, Quick Disconnect, Environment Resisting) Receptacles and Plugs, General
20、 Specification for. Blade, Pork Type (For Rack and Panel and other Applications), General Specification for. Type and Crimp Type Contacts. - Connectors, Electrical, Rkctangular, Removable Contact, Formed - Connectors, Electrical, Rectangular, Rack and Panel, Solder - Connectors, Electric, Rectangula
21、r, High Density, Polarized Center Jackscrew, General Specification for. - Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect, Environment Resistant, Removable Crimp Contacts. - Connectors, Coaxial, Radio Frequency, General Specification for. - Connectors, Electrical: Jacks,
22、Tip (Test Point, Panel or Printed Iiiring Type), General Specification for. - Contacts, Electrical Connector, Pin, Crimp Removable, (For MIL-C-26482 Series 2, MIL-C-81703 Series 3, MIL-C-83733, and MIL-C-83723 Series 3 Connectors). (For MIL-C-26482 Series 2, MIL-C-81703 Series 3, MIL-C-83733, and MI
23、L-C-83723 Series 3 Connectors). - Contacts, Electrical Connector, Socket, Crimp,Removable, 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1353B MIL-STD-13538 W 99979LL 0272283 175 . 2 July 1980 MIL-c-39029111 MIL-C-39029112 MIL-C-39029127
24、MIL-039029128 MIL-C-39029129 MIL-C-39029/30 MIL-C-39029/44 MIL-C-39029/45 MIL-C-39029148 MIL-C-39029149 MIL-c-39029150 MIL-C-39029151 MIL-C-39029156 MIL-C-39029/57 MIL-C-39029158 MIL-C-39029159 MIL-C-39029160 - Contacts, Electrical Connector, Pin, Crimp Removable, (For MIL-C-81659 Series 2 Connector
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DLAMILSTD1353B1980ELECTRICALCONNECTORSPLUGINSOCKETSANDASSOCIATEDHARDWARESELECTIONANDUSEOFPDF

链接地址:http://www.mydoc123.com/p-693471.html