DLA MIL-PRF-39003 9 G-2012 CAPACITOR FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) HIGH FREQUENCY ESTABLISHED RELIABILITY STYLE CSR21.pdf

《DLA MIL-PRF-39003 9 G-2012 CAPACITOR FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) HIGH FREQUENCY ESTABLISHED RELIABILITY STYLE CSR21.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-PRF-39003 9 G-2012 CAPACITOR FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) HIGH FREQUENCY ESTABLISHED RELIABILITY STYLE CSR21.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A FSC 5910 INCH-POUND MIL-PRF-39003/9G 23 August 2012 SUPERSEDING MIL-PRF-39003/9F 10 December 2009 PERFORMANCE SPECIFICATION SHEET CAPACITOR, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG), HIGH FREQUENCY, ESTABLISHED RELIABILITY, STYLE CSR21 This specification

2、is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-39003. Inches mm .002 0.05 .025 0.64 .094 2.39 .250 6.35 1.500 38.10 FIGURE 1. Dimensions and configurat

3、ion. FAILURE RATE LEVELS “M”, “P”, AND “R” ARE INACTIVE FOR NEW DESIGN AFTER 2 FEBRUARY 1984. FAILURE RATE LEVEL “S” IS INACTIVE FOR NEW DESIGN AFTER 15 AUGUST 1984. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39003/9G 2 Case size Dimensi

4、ons L .031 (0.79) D + .016 (0.41) - .015 (0.38) J max C D .686 (17.42) .786 (19.96) .289 (7.34) .351 (8.92) .822 (20.88) .922 (23.42) NOTES: 1. Dimensions are in inches. 2. Metric equivalents are in parentheses and are given for general information only. 3. The case insulation shall extend .015 (0.3

5、8 mm) minimum beyond each end. However, when a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body. 4. Lead length may be a minimum of 1-inch long for use in tape and reel automatic insertion equipment, when specified. FIGURE 1. Dimensions and configuration Continued.

6、REQUIREMENTS: Requirements: Requirements shall be in accordance with MIL-PRF-39003, and as specified herein. Design and construction: Capacitors shall be of the design, construction, and physical dimensions specified on figure 1. Case type: Tubular, insulated. Material: Metal (alloy unspecified). Ty

7、pe of seal: Hermetic. Leads: Type N of MIL-STD-1276, tin-lead plating, electrodeposited or hot-solder dipped. DC related voltage: See table I. Above +85C voltage derating is required (see MIL-PRF-39003). DC leakage (DCL): See table I. Capacitance (Cap.) (nom): See table I. Cap. tolerance: 5, 10, and

8、 20 percent, see table I. Dissipation factor (DF): See table I. Equivalent series resistance (ESR at 100 kHz): See table I. Operating temperature: -55C to +125C. Failure rate level: See table I. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I

9、. Electrical characteristics and PINs. DC rated volt-age Capaci- tance Capaci- tance toler- ance DC leakage at Dissipation factor 1 kHz +25C ESR 100 kHz +25C (max) Ripple current 40 kHz +25C (max) Derated ripple current 1 kHz, +25C (max) Case size PIN M39003/09- 1/ Failure rate level for (%1000 hrs.

10、) +25C +85C +125C M (1.0) P (0.1) R (0.01) S (0.001) G (1.0) B (0.1) C (0.01) D (0.001) Volts F Percent A A A Percent Ohms A A 6 6 6 6 6 6 6 6 6 6 150 150 150 180 180 270 270 330 330 330 5 10 20 5 10 5 10 5 10 20 4.5 4.5 4.5 5.5 5.5 6.5 6.5 7.5 7.5 7.5 90 90 90 110 110 130 130 150 150 150 113 113 11

11、3 138 138 163 163 188 188 188 10 10 10 10 10 10 10 12 12 12 0.065 0.065 0.065 0.060 0.060 0.050 0.050 0.045 0.045 0.045 3.3 3.3 3.3 3.4 3.4 4.1 4.1 4.3 4.3 4.3 2 2 2 2.4 2.4 3.4 3.4 3.8 3.8 3.8 C C C C C D D D D D 0001- 0002- 0003- 0004- 0005- 0006- 0007- 0008- 0009- 0010- 0101- 0102- 0103- 0104- 01

12、05- 0106- 0107- 0108- 0109- 0110- 0201- 0202- 0203- 0204- 0205- 0206- 0207- 0208- 0209- 0210- 0301- 0302- 0303- 0304- 0305- 0306- 0307- 0308- 0309- 0310- 5001- 5002- 5003- 5004- 5005- 5006- 5007- 5008- 5009- 5010- 2001- 2002- 2003- 2004- 2005- 2006- 2007- 2008- 2009- 2010- 3001- 3002- 3003- 3004- 30

13、05- 3006- 3007- 3008- 3009- 3010- 4001- 4002- 4003- 4004- 4005- 4006- 4007- 4008- 4009- 4010- 10 10 10 10 10 10 10 10 10 10 10 10 82 82 100 100 100 120 120 180 180 220 220 220 5 10 5 10 20 5 10 5 10 5 10 20 4 4 5 5 5 6 6 9 9 10 10 10 80 80 100 100 100 120 120 180 180 200 200 200 100 100 125 125 125

14、150 150 226 226 250 250 250 8 8 8 8 8 8 8 8 8 10 10 10 0.085 0.085 0.075 0.075 0.075 0.070 0.070 0.060 0.060 0.055 0.055 0.055 2.9 2.9 3 3 3 3.2 3.2 3.7 3.7 3.9 3.9 3.9 1.8 1.8 2.2 2.2 2.2 2.5 2.5 3.4 3.4 3.4 3.4 3.4 C C C C C C C D D D D D 0011- 0012- 0013- 0014- 0015- 0016- 0017- 0018- 0019- 0020-

15、 0021- 0022- 0111- 0112- 0113- 0114- 0115- 0116- 0117- 0118- 0119- 0120- 0121- 0122- 0211- 0212- 0213- 0214- 0215- 0216- 0217- 0218- 0219- 0220- 0221- 0222- 0311- 0312- 0313- 0314- 0315- 0316- 0317- 0318- 0319- 0320- 0321- 0322- 5011- 5012- 5013- 5014- 5015- 5016- 5017- 5018- 5019- 5020- 5021- 5022-

16、 2011- 2012- 2013- 2014- 2015- 2016- 2017- 2018- 2019- 2020- 2021- 2022- 3011- 3012- 3013- 3014- 3015- 3016- 3017- 3018- 3019- 3020- 3021- 3022- 4011- 4012- 4013- 4014- 4015- 4016- 4017- 4018- 4019- 4020- 4021- 4022- 15 15 15 15 15 15 15 15 15 15 56 56 68 68 68 120 120 150 150 150 5 10 5 10 20 5 10

17、5 10 20 4 4 5 5 5 9 9 10 10 10 80 80 100 100 100 180 180 200 200 200 100 100 125 125 125 226 226 250 250 250 6 6 6 6 6 8 8 8 8 8 0.100 0.100 0.095 0.095 0.095 0.070 0.070 0.065 0.065 0.065 2.6 2.6 2.7 2.7 2.7 3.5 3.5 3.6 3.6 3.6 1.8 1.8 2.2 2.2 2.2 2.8 2.8 3.1 3.1 3.1 C C C C C D D D D D 0023- 0024-

18、 0025- 0026- 0027- 0028- 0029- 0030- 0031- 0032- 0123- 0124- 0125- 0126- 0127- 0128- 0129- 0130- 0131- 0132- 0223- 0224- 0225- 0226- 0227- 0228- 0229- 0230- 0231- 0232- 0323- 0324- 0325- 0326- 0327- 0328- 0329- 0330- 0331- 0332- 5023- 5024- 5025- 5026- 5027- 5028- 5029- 5030- 5031- 5032- 2023- 2024-

19、 2025- 2026- 2027- 2028- 2029- 2030- 2031- 2032- 3023- 3024- 3025- 3026- 3027- 3028- 3029- 3030- 3031- 3032- 4023- 4024- 4025- 4026- 4027- 4028- 4029- 4030- 4031- 4032- See footnote at end of table. MIL-PRF-39003/9G3Provided by IHSNot for ResaleNo reproduction or networking permitted without license

20、 from IHS-,-,-TABLE I. Electrical characteristics and PINs Continued. DC rated volt- age Capaci- tance Capaci- tance toler-ance DC leakage at Dissipation factor 1 kHz +25C ESR 100 kHz +25C (max) Ripple current 40 kHz +25C (max) Derated ripple current 1kHz, +25C (max) Case size PIN M39003/09- 1/ Fail

21、ure rate level for (%1000 hrs.) +25C +85C +125C M (1.0) P (0.1) R (0.01) S (0.001) G (1.0) B (0.1) C (0.01) D (0.001) Volts F Percent A A A Percent Ohms A A 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 27 27 33 33 33 39 39 47 47 47 56 56 68 68 68 82 82 100 100 100 5 10 5 10 20 5 10 5

22、10 20 5 10 5 10 20 5 10 5 10 20 2.5 2.5 3.5 3.5 3.5 4 4 4.5 4.5 4.5 5.5 5.5 7 7 7 8 8 10 10 10 50 50 70 70 70 80 80 90 90 90 110 110 140 140 140 160 160 200 200 200 63 63 88 88 88 100 100 113 113 113 138 138 175 175 175 200 200 250 250 250 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 8 8 8 0.145 0.145 0.130 0.

23、130 0.130 0.120 0.120 0.110 0.110 0.110 0.100 0.100 0.095 0.095 0.095 0.085 0.085 0.075 0.075 0.075 2.2 2.2 2.3 2.3 2.3 2.4 2.4 2.5 2.5 2.5 2.9 2.9 3 3 3 3.1 3.1 3.3 3.3 3.3 1.2 1.2 1.4 1.4 1.4 1.7 1.7 1.8 1.8 1.8 2.2 2.2 2.4 2.4 2.4 2.5 2.5 2.5 2.5 2.5 C C C C C C C C C C D D D D D D D D D D 0033-

24、0034- 0035- 0036- 0037- 0038- 0039- 0040- 0041- 0042- 0043- 0044- 0045- 0046- 0047- 0048- 0049- 0050- 0051- 0052- 0133- 0134- 0135- 0136- 0137- 0138- 0139- 0140- 0141- 0142- 0143- 0144- 0145- 0146- 0147- 0148- 0149- 0150- 0151- 0152- 0233- 0234- 0235- 0236- 0237- 0238- 0239- 0240- 0241- 0242- 0243-

25、0244- 0245- 0246- 0247- 0248- 0249- 0250- 0251- 0252- 0333- 0334- 0335- 0336- 0337- 0338- 0339- 0340- 0341- 0342- 0343- 0344- 0345- 0346- 0347- 0348- 0349- 0350- 0351- 0352- 5033- 5034- 5035- 5036- 5037- 5038- 5039- 5040- 5041- 5042- 5043- 5044- 5045- 5046- 5047- 5048- 5049- 5050- 5051- 5052- 2033-

26、2034- 2035- 2036- 2037- 2038- 2039- 2040- 2041- 2042- 2043- 2044- 2045- 2046- 2047- 2048- 2049- 2050- 2051- 2052- 3033- 3034- 3035- 3036- 3037- 3038- 3039- 3040- 3041- 3042- 3043- 3044- 3045- 3046- 3047- 3048- 3049- 3050- 3051- 3052- 4033- 4034- 4035- 4036- 4037- 4038- 4039- 4040- 4041- 4042- 4043-

27、4044- 4045- 4046- 4047- 4048- 4049- 4050- 4051- 4052- 35 35 35 35 35 35 35 35 35 35 35 35 35 22 22 22 27 27 33 33 33 39 39 47 47 47 5 10 20 5 10 5 10 20 5 10 5 10 20 4 4 4 4.5 4.5 5.5 5.5 5.5 7 7 8 8 8 80 80 80 90 90 110 110 110 140 140 160 160 160 100 100 100 113 113 138 138 138 175 175 200 200 200

28、 4 4 4 4 4 5 5 5 5 5 5 5 5 0.160 0.160 0.160 0.145 0.145 0.130 0.130 0.130 0.120 0.120 0.110 0.110 0.110 2.1 2.1 2.1 2.4 2.4 2.5 2.5 2.5 2.6 2.6 2.7 2.7 2.7 1.5 1.5 1.5 1.9 1.9 1.9 1.9 1.9 2 2 2.2 2.2 2.2 C C C D D D D D D D D D D 0053- 0054- 0055- 0056- 0057- 0058- 0059- 0060- 0061- 0062- 0063- 006

29、4- 0065- 0153- 0154- 0155- 0156- 0157- 0158- 0159- 0160- 0161- 0162- 0163- 0164- 0165- 0253- 0254- 0255- 0256- 0257- 0258- 0259- 0260- 0261- 0262- 0263- 0264- 0265- 0353- 0354- 0355- 0356- 0357- 0358- 0359- 0360- 0361- 0362- 0363- 0364- 0365- 5053- 5054- 5055- 5056- 5057- 5058- 5059- 5060- 5061- 506

30、2- 5063- 5064- 5065- 2053- 2054- 2055- 2056- 2057- 2058- 2059- 2060- 2061- 2062- 2063- 2064- 2065- 3053- 3054- 3055- 3056- 3057- 3058- 3059- 3060- 3061- 3062- 3063- 3064- 3065- 4053- 4054- 4055- 4056- 4057- 4058- 4059- 4060- 4061- 4062- 4063- 4064- 4065- See footnote at end of table. MIL-PRF-39003/9

31、G4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Electrical characteristics and PINs Continued. DC rated volt-age Capaci- tance Capaci- tance toler- ance DC leakage at Dissipation factor 1 kHz +25C ESR 100 kHz +25C (max) RipPle current 40 k

32、Hz +25C (max) Derated ripple current 1kHz, +25C (max) Case size PIN M39003/09- 1/ Failure rate level for (%1000 hrs.) +25C +85C +125C M (1.0) P (0.1) R (0.01) S (0.001) G (1.0) B (0.1) C (0.01) D (0.001) Volts F Percent A A A Percent Ohms A A 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

33、50 5.6 5.6 6.8 6.8 6.8 8.2 8.2 10 10 10 12 12 15 15 15 18 18 22 22 22 5 10 5 10 20 5 10 5 10 20 5 10 5 10 20 5 10 5 10 20 2.2 2.2 2.2 2.2 2.2 2.5 2.5 2.5 2.5 2.5 3 3 4 4 4 4.5 4.5 5.5 5.5 5.5 45 45 45 45 45 50 50 50 50 50 60 60 80 80 80 90 90 110 110 110 56 56 56 56 56 63 63 63 63 63 75 75 100 100 1

34、00 113 113 138 138 138 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 0.300 0.300 0.275 0.275 0.275 0.250 0.250 0.230 0.230 0.230 0.210 0.210 0.190 0.190 0.190 0.175 0.175 0.160 0.160 0.160 1.5 1.5 1.6 1.6 1.6 1.6 1.6 1.7 1.7 1.7 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.3 2.3 2.3 0.6 0.6 0.7 0.7 0.7 0.9 0.9 1.1 1.1 1

35、.1 1.3 1.3 1.4 1.4 1.4 1.4 1.4 1.7 1.7 1.7 C C C C C C C C C C C C C C C C C D D D 0066- 0067- 0068- 0069- 0070- 0071- 0072- 0073- 0074- 0075- 0076- 0077- 0078- 0079- 0080- 0081- 0082- 0083- 0084- 0085- 0166- 0167- 0168- 0169- 0170- 0171- 0172- 0173- 0174- 0175- 0176- 0177- 0178- 0179- 0180- 0181- 0

36、182- 0183- 0184- 0185- 0266- 0267- 0268- 0269- 0270- 0271- 0272- 0273- 0274- 0275- 0276- 0277- 0278- 0279- 0280- 0281- 0282- 0283- 0284- 0285- 0366- 0367- 0368- 0369- 0370- 0371- 0372- 0373- 0374- 0375- 0376- 0377- 0378- 0379- 0380- 0381- 0382- 0383- 0384- 0385- 5066- 5067- 5068- 5069- 5070- 5071- 5

37、072- 5073- 5074- 5075- 5076- 5077- 5078- 5079- 5080- 5081- 5082- 5083- 5084- 5085- 2066- 2067- 2068- 2069- 2070- 2071- 2072- 2073- 2074- 2075- 2076- 2077- 2078- 2079- 2080- 2081- 2082- 2083- 2084- 2085- 3066- 3067- 3068- 3069- 3070- 3071- 3072- 3073- 3074- 3075- 3076- 3077- 3078- 3079- 3080- 3081- 3

38、082- 3083- 3084- 3085- 4066- 4067- 4068- 4069- 4070- 4071- 4072- 4073- 4074- 4075- 4076- 4077- 4078- 4079- 4080- 4081- 4082- 4083- 4084- 4085- 1/ Dash number shall include a letter that indicates user preference for surge current/high temperature solder or the dash will be deleted. MIL-PRF-39003/9G5

39、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39003/9G 6 REQUIREMENTS Continued: Stability at low and high temperatures: In accordance with MIL-PRF-39003. Step 1 (+25C): DCL: See table I. Capacitance: Within tolerance of table I value. DF:

40、See table I. Step 2 (-55C): Capacitance: Shall not change more than 10 percent of step 1 measured value. DF: 2 times step 1 measured value or table I, whichever is greater. Step 3 (+25C): DCL: See table I. Capacitance: Shall not change more than 2 percent of step 1 measured value. DF: See table I. S

41、tep 4 (+85C): DCL: See table I. Capacitance: Shall not change more than 8 percent of step 1 measured value. DF: 1.5 times step 1 measured value or table I, whichever is greater. Step 5 (+125C): DCL: See table I. Capacitance: Shall not change more than 12 percent of step 1 measured value. DF: 1.5 tim

42、es step 1 measured value or table I, whichever is greater. Step 6 (+25C): DCL: See table I. Cap.: Shall not change more than 2 percent of step 1 measured value. DF: See table I. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39003/9G 7 Surge

43、 voltage: In accordance with MIL-PRF-39003. DCL: See table I. Capacitance: Shall not change more than 2 percent of initial measured value. DF: See table I. Life: Method 108 of ML-STD-202. 240, 1,000, and 2,000 hours: At +25C (as applicable): DCL: 200 percent of initial limit. Capacitance: Shall not

44、change more than 5 percent of initial measured value. DF: See table I. ESR: (after 240 and 2,000 hours): See table I. At +85C: DCL: See table I. At +125C: DCL: See table I. 4,000, 6,000, 8,000, and 10,000 hours (exponential only): At +25C (as applicable): DCL: 400 percent of initial limit. Capacitan

45、ce: Shall not change more than 10 percent of initial measured value. DF: See table I. ESR: (after 10,000 hours): See table I. At +85C: DCL: 200 percent of initial limit. At +125C: DCL: 200 percent of initial limit. Marking: In accordance with MIL-PRF-39003. Part or Identifying Number (PIN): M39003/0

46、9-(dash number from table I). Substitutability data: Substitutability for failure rate levels and capacitance tolerances shall be in accordance with MIL-PRF-39003. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39003/9G 8 APPLICATION NOTES:

47、1. Rated ripple current is the rms value of the maximum allowable alternating current of a specified frequency, at which the capacitor may be operated continuously at a specified temperature. Derate ripple current for ambient temperature in accordance with the curve shown on figure 2. 2. For deratin

48、g the frequency, use the derated ripple currents at 1 kHz given in table I. Below 1 kHz these same currents are applicable provided the peak ac voltage does not result in voltage reversal or exceeds the rated dc voltage. Between 1 kHz and 40 kHz the ripple current may be interpolated linearly with f

49、requency. The ripple current is applicable at frequencies above 40 kHz. 3. Although style CSR21 capacitors are rated to operate with the specified levels of rms ripple current, they are basically polar devices. Care must be exercised to assure that sufficient dc bias is applied to prevent ac voltage reversal