DLA GGG-C-475 B-1973 CLIPPERS HAIR HAND《毛发剪刀》.pdf

《DLA GGG-C-475 B-1973 CLIPPERS HAIR HAND《毛发剪刀》.pdf》由会员分享，可在线阅读，更多相关《DLA GGG-C-475 B-1973 CLIPPERS HAIR HAND《毛发剪刀》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、,c -86-30 -GGG-C-475B 35 m 7777774 0025344 m October 23, 1973 SUPERSEDING Fed. Spec. GGG-C-475A April 12 1965 (See 6.d . FEDERAL SPECIFICATION CLIPPERS, HAIR, HAND This specification was approved by the Commissioner, Federal Supply Service, General Services Administration, for the use of all Federal

2、 agencies. 1. SCOPE AND CLASSIFICATION 1.1 Scope. This specification covers a manually operated hair clipper (see 6.1). 1.2 Classification. The hair clipper shall be the following size. Size O - Cuts hair 1/32 inch long 2. APPLICABLE DOCUMENTS 2.1 The following documents, of the issue in effect on d

3、ate of invitation for bids or request for proposal, form a part of this specification to the extent specified herein: Federal Specifications: PPP-B-566 - Boxes, Folding, Paperboard. PPP-B-636 - Boxes, Shipping, Fiberboard. PPP -B-6 7 6 - Boxes, Setup. Federal Standard: FED-STD-123 - Marking for Dome

4、stic Shipment (Civil Agencies). (Activities outside the Federal Government may obtain copies of Federal Specifications, Standards, and Handbooks as outlined under General In- formation in the Index of Federal Specifications and Standards and at the prices indicated in the Index. supplements as issue

5、d, is for sale on a subscription basis by the Super- intendent of Documents, U.S. Government Printing Office, Washington, DC 20402. The Index, which includes cumulative monthly FSC 3590 THIS DWUNIENT CQAITAINS PA incorrect; illegible; of improper size, location, sequence or method of application Imp

6、roperly applied or missing Weight I Net weight is more than specified I 4.3.5 Examination of shipping containers. When shipping containers are required to be in accordance wth PPP-B-636, examination for defects in closure, waterproofing, and strapping shall be in accordance with the appendix of the

7、applicable specification. 4.4 Tests. 4.4.1 Hardness test. The hardness of cutting blades shall be performed in accordance with ASTM E18. locations on teeth, i.ee, each end tooth and the middle tooth. Hardness of blades shall be taken in the center of the widest surface area. Any nonconformance with

8、3.3.2 shall constitute failure of this test. Cutting edge hardness shall be taken at three 4.4.2 Operability of clippers. All components of the clipper shall function as intended when operated to determine compliance with 3.3. The clipper compression cap wing nut when tightened or loosened shall con

9、trol the effort or ease respectively of clipper operation and permit easy dis- assembly for cleaning. a minimum of 10 times. failure of this test. The clipper handle shall be compressed and released Any nonconformance with 3.3 shall constitute 4.4.3 Cutting test. Clipper shall be tested for height o

10、f hair remaining by simulating head hair using a flat brush with bristles approximately 1/4 inch in height. remaining bristle height shall be 1/32 inch high, +1/64, -0. Failure to cut bristles down to the specified height shall constitute test failure. The clipper shall be operated across the brush

11、and the 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-GGG-C-475B 35 7777774 0025353 5 m GGG-C-475B 5. PREPARATION FOR DELIVERY 5.1 Preservation and packaging. Preservation and packaging shall be level A or C, as specified (see 6.2) . 5.1.1 Level

12、A. 5.1.1.1 Preservation. Al1 preservation methods and materials shall con- form to MIL-P-116. Exposed uncoated steel surfaces-of each clipper shall be cleaned by method C-1, preserved with type P-14 preservative, and wrapped in greaseproof barrier material conforming to type II, grade A, class 1 of

13、MIL-B-121. 5.1.1.2 Unit packaging. Each clipper, preserved as specified in 5.1.1.1, shall be packaged together with the blade guard in a snug-fitting folding Set-up paperboard box conforming to variety 1, style III or VIII, type By class a of PPP-B-566 or type i, variety 1, class A, style 3 or 4 of

14、PPP-B-676. Box closure shall be in accordance with the appendix of the applicable box specification. 5.1.1.3 Intermediate packaging. Fifty clippers, unit packaged as specified in 5.1.1.2, shall be packed in a snug-fitting fiberboard box conforming to type CF or SF, class domestic, style RSC of PPP-B

15、-636. Closure shall be in accordance with the appendix of the container specification. 5.1.2 Level C. Clippers shall be preserved and packaged in accordance with the industrys practice. 5.2 Packing. Packing shall be level A, B, or C, as specified (see 6.2) . 5.2.1 Level A. One hundred clippers prese

16、rved and packaged as specified in 5.1, shall be packed in a snug-fitting fiberboard shipping container conforming to VS, style RSC of PPP-B-636, Each shipping container shall be closed, waterproofed by means of tape, and reinforced with strapping or tape banding in accordance with the appendix of th

17、e container specification. 5.2.2 Level B. One hundred clippers preserved and packaged as specified in 5.1 shall be packed in a snug-fitting fiberboard shipping container con- forming to type CF or SF, class domestic, style-RSC of PPP-B-636. Closure shall be in accordance with method II of the append

18、ix of PPP-B-636. 5.2.2.1 When specified (see 6.2), the shipping container shall be a grade VC, V3s,or V4s fiberboard box fabricated in accordance with PPP-B-636 and closed in accordance with the appendix thereto. 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license

19、from IHS-,-,-GGG-C-4759 35 7777974 0025352 7 I GGG-C-473 5.2.3 Level C. Clippers, packaged as specified in 5.1, shall be packed in a manner to insure carrier acceptance and safe delivery at destination at the lowest transportation rate for such supplies. Containers shall be in accordance with Unifor

20、m Freight Classification Rules or National Motor Freight Classification Rules, as applicable. 5.3 Marking. 5.3.1 Civil agencies. In addition to any special marking required by the contract or order (see 6.2), intermediate packages and shipping containers shall be marked in accordance with FED-STD-12

21、3. 5.3.2 Military requirements. In addition to any special marking required by the contract or order (see 6.2), intermediate packages and shipping con- tainers shall be marked in accordance with MIL-STD-129. 6. NOTES 6.1 Intended use. The hair clipper covered by this specification is in- Size O clip

22、per (one) and spare tended for use in cutting of human hair. blade set (one), are components of Military Barber Kit, PSN 3590-058-1837. 6.2 Ordering data. Purchasers should select the preferred options permitted herein and include the following information in procurement documents: (a) (b) (c) (d) (

23、e) Title, number, and date of this specification. quantity of blade sets required (see 3.3). Selection of applicable levels of preservation, packaging, When weather-resistant grade fiberboard shipping containers Special marking when required (see 5.3 1 and 5.3.2) . and packing (see 5.1 and 5.2) are

24、required for level B packing (see 5.2.2.1). 6.3 Level B packaging (civil agencies). When level B packaging is speci- fied for civil agency procurement, the requirements in 5.1.1 shall apply. 6.4 Deleted items. Sizes 1, 0,and O00 formerly a part of GGG-C475a, dated 12 April 1965, have been deleted from this revision. 9 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-