DLA DSCC-DWG-88051 REV G-2007 FILTERS AND CAPACITORS RADIO FREQUENCY ELECTROMAGNETIC INTERFERENCE SUPPRESSION NONHERMETICALLY SEALED《射频和电磁干扰抑制的非全密封的过滤器和电容器》.pdf

《DLA DSCC-DWG-88051 REV G-2007 FILTERS AND CAPACITORS RADIO FREQUENCY ELECTROMAGNETIC INTERFERENCE SUPPRESSION NONHERMETICALLY SEALED《射频和电磁干扰抑制的非全密封的过滤器和电容器》.pdf》由会员分享，可在线阅读，更多相关《DLA DSCC-DWG-88051 REV G-2007 FILTERS AND CAPACITORS RADIO FREQUENCY ELECTROMAGNETIC INTERFERENCE SUPPRESSION NONHERMETICALLY SEALED《射频和电磁干扰抑制的非全密封的过滤器和电容器》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、 REVISIONS LTR DESCRIPTION DATE APPROVED A Added additional packaging requirements. Added another suggested source of supply 4 JUN 90 D. Moore B Pg. 2: Deleted requirements for thermal shock/immersion and moisture resistance tests. Pg. 4: Changed dimension across teeth of lockwasher to .032 inch .00

2、5 inch. Pg. 5: Added application note in 6.2. Pg. 6: Added “user of record“ paragraph. Corrected suppliers part numbers on -002, -003, and -010. Editorial changes throughout. 5 APR 93 D. Moore C Pg. 2: Added gold case finish option; prohibited pure tin case finish. Pg. 3: Changed sample requirements

3、 for dc resistance/dc voltage drop test. Pg. 5: Added paragraph to explain pure tin prohibition. Editorial changes throughout. 29 MAR 94 D. Moore D Table I, dash number 007; changed 1 Ghz IL value 24 SEP 96 D. Moore E Table I, insertion loss changes; added column for IL at resonant frequency and new

4、 footnote. 24 FEB 98 D. Moore F Pg. 2: Para 3.1.3; Removed MIL-T-10727 reference. Pg. 7: Removed a source of supply. Editorial changes. 27 APR 01 Kendall A. Cottongim G Page 2 Added hardware to the finish requirement paragraph (3.1.3). Added pure tin prohibition paragraph (3.1.4). Added certificate

5、of compliance paragraph (3.12). Deleted inspection of packaging paragraph (4.2.3). Editorial and format changes throughout. 17 JAN 07 M. A. Radecki THE ORIGINAL FIRST PAGE OF THIS DRAWING HAS BEEN REPLACED. Prepared in accordance with ASME Y14.100 Source control drawing REV STATUS REV G G G G G G G

6、OF PAGES PAGES 1 2 3 4 5 6 7 PMIC N/A PREPARED BY PATRICK G. KYNE DESIGN ACTIVITY DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OH Original date of drawing CHECKED BY DAVID E. MOORE TITLE FILTERS AND CAPACITORS, RADIO FREQUENCY/ 16 November 1988 APPROVED BY DAVID E. MOORE ELECTROMAGNETIC INTERFERENCE SU

7、PPRESSION, NONHERMETICALLY SEALED SIZE A CODE IDENT. NO. 14933 DWG NO. 88051 REV G PAGE 1 OF 7 AMSC N/A 59GP-E058 CURRENT DESIGN ACTIVITY CAGE CODE 037Z3 DEFENSE LOGISTICS AGENCY DEFENSE SUPPLY CENTER COLUMBUS, COLUMBUS, OHIO 43216-5000 Provided by IHSNot for ResaleNo reproduction or networking perm

8、itted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER, DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 88051 REV G PAGE 2 1. SCOPE 1.1 Scope. This drawing and MIL-PRF-28861 describe the complete requirements for radio frequency interference filters and capacitors. 1.2 Part or Identif

9、ying Number (PIN). The complete PIN shall be as follows: 88051 - XXX X l l l | | | Drawing number Dash number (see table I) Case finish (see 3.1.3) 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3 and 4 of this drawing. This section does not inclu

10、de documents cited in other sections of this drawing or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents in sections 3 and 4 of thi

11、s drawing, whether or not they are listed here. 2.2 Government documents. 2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are

12、those cited in the solicitation or contract (see 6.5). DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-28861 - Filters and Capacitors, Radio Frequency/Electromagnetic, Interference, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-220 - Method of Insertion Loss Measurement. MIL-STD-128

13、5 - Marking of Electrical and Electronic Parts. (Copies of these documents are available online at http:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.3 Order of precedence. In the event of a conflic

14、t between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Design, construction, and physical dimensi

15、ons. The design, construction, and physical dimensions shall be as specified in MIL-PRF-28861 and herein. 3.1.1 Terminals. Terminals shall be solderable and in accordance with figure 1 herein. 3.1.2 Case dimensions. The case dimensions shall be in accordance with figure 1 herein. 3.1.3 Case and hard

16、ware Finish. The finish shall be T (tin plated or tin-lead plated), S(silver plated), or G(gold plated); in accordance with MIL-PRF-28861. (NOTE: Pure tin finish is prohibited after 30 September 1994 (see 6.3). 3.1.4 Pure tin prohibition. Pure tin is prohibited as specified in MIL-PRF-28861. 3.2 Ope

17、rating temperature range. The operating temperature range shall be -55C to +125C. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER, DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 88051 REV G PAGE 3 3.3 Temperature r

18、ise. The temperature rise shall be +25C maximum. 3.4 Thermal shock and immersion (group B). Not applicable. 3.5 Moisture resistance. Not applicable. 3.6 Seal. Not applicable. 3.7 Solderability of terminals. In accordance with MIL-PRF-28861. 3.8 Electrical characteristics. 3.8.1 Rated voltage. The ra

19、ted voltage shall be in accordance with table I. 3.8.2 Rated current. The rated current shall be 10 amperes maximum. 3.8.3 Capacitance. Capacitance shall be in accordance with table I. 3.8.4 Dissipation factor. 3 percent maximum. 3.8.5 Voltage and temperature limits of capacitance. Voltage and tempe

20、rature limits of capacitance shall be +15, -40 percent. 3.8.6 Insulation resistance. Insulation resistance shall be as follows: At +25C: 1,000 megohm-microfarads or 100,000 megohms minimum, whichever is less. At +125C: 100 megohm-microfarads or 10,000 megohms minimum, whichever is less. 3.8.7 Insert

21、ion loss. Insertion loss shall be as follows: At +25 C: In accordance with table I. At -55 C and +125 C: A 3 dB degradation from the +25C value shall be allowed. 3.8.8 Voltage drop. Voltage drop shall be 0.2 volt, maximum. 3.8.9 DC resistance. DC resistance shall be 0.02 ohm, maximum. 3.9 Product as

22、surance level. Class B only. 3.10 Marking. Filters shall be marked, as a minimum, with the PIN as shown in the example. The unit package shall be marked in accordance with MIL-STD-1285, except the PIN shall be as specified in 1.2, with the manufacturers name or code, date code, voltage rating, and c

23、urrent rating. Example of marking for the PIN on the hex flats - expanded view 3.11 Manufacturer eligibility. To be eligible for listing as an approved source of supply, a manufacturer shall be listed on the MIL-PRF-28861 Qualified Products List for at least one part or, perform first article inspec

24、tion in accordance with the MIL-PRF-28861 qualification inspection requirements for class B. 3.12 Certificate of compliance. A certificate of compliance shall be required from manufacturers requesting to be an approved source of supply. 3.13 Recycled, recovered, or environmentally preferable materia

25、ls. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. 3.14 Workmanship. Filters shall be process

26、ed in such a manner as to be uniform in quality and shall be free from cold soldering, corrosion, pits, dents, cracks, rough sharp edges, misalignments, and other defects that will affect life, serviceability, or appearance. Cracks in glass seals are not allowed, however, minor meniscus crazing is a

27、cceptable. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER, DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 88051 REV G PAGE 4 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general informat

28、ion only. 3. Circuit diagram is for information only. 4. All filters shall be supplied with mounting hardware (hex nut and lockwasher). 5. One and one-half imperfect threads allowed .030 inch (0.76 mm) maximum. 6. One imperfect thread allowed .030 inch (0.76 mm) maximum. 7. Recommended mounting torq

29、ue: 32 oz-inch 4 oz-inch. 8. Potting shall not extend beyond .030 inch (0.76 mm) from the filter body. FIGURE 1. Case and hardware dimensions and circuit diagrams. Inches mm Inches mm .002 .005 .007 .010 .020 .030 .032 .057 .067 .112 0.05 0.13 0.18 0.25 0.51 0.76 0.81 1.45 1.70 2.84 .120 .145 .154 .

30、159 .183 .215 .220 .225 .240 .360 3.05 3.68 3.91 4.04 4.65 5.46 5.59 5.72 6.10 9.14 Dash number A dimension -003 .145 .030 -001, -002, -004 thru -010 .120 .005 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER, DAYTON,

31、 OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 88051 REV G PAGE 5 TABLE I. Electrical characteristics. Dash Number Circuit Rated voltage volts dc Capacitance (F) -0, +100 percent Minimum insertion loss (dB) in accordance with MIL-STD-220 1/ 2/ Minimum insertion loss at resonant frequency 3/ 1 Mhz 10 Mhz

32、100 Mhz 200 Mhz 1 Ghz 10 Ghz 001 C 100 .027 10 30 39 43 65 70 40dB 200Mhz-1Ghz 002 L2 100 .027 10 30 50 45 65 70 - 003 L2 100 .045 14 37 45 45 70 70 40 dB 100Mhz-500Mhz 004 C 200 10 pF - - - - 5 15 - 005 C 200 100 pF - - 3 10 20 28 - 006 C 200 500 pF - - 15 20 34 45 - 007 C 200 1,000 pF - 4 20 25 25

33、 55 - 008 C 200 5,000 pF - 15 34 41 42 55 30dB 200Mhz-1Ghz 009 C 200 .01 4 21 35 42 50 70 35dB 200Mhz-1Ghz 010 L2 200 .01 4 21 35 44 50 70 35dB 200Mhz-1Ghz 1/ For C circuits, insertion loss measurements shall be made under no load. For L2 circuits, insertion loss measurements shall be made under ful

34、l load over the frequency range of 1 Mhz to 10 Mhz. Insertion loss measurements above this frequency range shall be made under no load. 2/ Except as specified in 3/, the insertion loss requirements between any two adjacent specified frequencies shall be that of the lower of the two frequencies in or

35、der to accommodate resonant dips. 3/ The frequency range in which the resonant frequency dip will occur and the minimum insertion loss at the resonant frequency. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER, DAYTO

36、N, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 88051 REV G PAGE 6 4. VERIFICATION 4.1 Qualification inspection. Qualification inspection is not required. 4.2 Conformance inspection. 4.2.1 Inspection of product for delivery. Inspection of product for delivery shall consist of groups A and B inspections

37、of MIL-PRF-28861 for class B. (The dc resistance/dc voltage drop test shall be performed on a sample basis as specified in MIL-PRF-28861 group A inspection table.) 4.2.2 Certification. The acquiring activity, at its discretion, may accept a certification of compliance with group B requirements in li

38、eu of performing group B tests (see 6.5c). 5. PACKAGING 5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD or in-house personnel, these personnel need to contact the

39、 responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements are maintained by the Inventory Control Points packaging activity within the Military Service or Defense Agency, or within the Military Services System command. Packaging data retrieval is available

40、 from the managing Military Departments or Defense Agencys automated packaging files, CD-ROM products, or by contacting the responsible packaging activity. 6. NOTES 6.1 Intended use. Filters conforming to this drawing are intended for use when military specifications do not exist and qualified milit

41、ary devices that will perform the required function are not available for OEM application. This drawing is intended exclusively to prevent the proliferation of unnecessary duplicate specifications, drawings, and stock catalog listings. When a military specification exists and the product covered by

42、this drawing has been qualified for listing on QPL-28861, this drawing becomes obsolete and will not be used for new design. The QPL-28861 product shall be the preferred item for all applications. 6.2 Application note. These nonhermetically sealed filters may be susceptible to moisture intrusion whe

43、n subjected to repeated thermal cycling. If these items are to be utilized in applications enduring harsh environments, the user should consider placing them within hermetic enclosures. 6.3 Tin plated finish. Pure tin plating is prohibited since it may result in tin whisker growth. Tin whisker growt

44、h could adversely affect the operation of electronic equipment systems. For additional information on this matter, refer to ASTM B545 (Standard Specification for Electrodeposited Coating of Tin). 6.4 Cataloging information. Dash numbers 001 and 004 through 009 shall be cataloged under FSC 5910 as fe

45、ed through ceramic capacitors. Dash numbers 002, 003, and 010 shall be cataloged under FSC 5915 as radio frequency interference filters. 6.5 Ordering data. The contract or purchase order should specify the following: a. Complete PIN (see 1.2). b. Requirements for delivery and one copy of the quality

46、 conformance inspection data or certificate of compliance that parts have passed quality conformance inspection with each shipment of parts by the manufacturer. c. Whether the manufacturer performs the group B tests or provides certification of compliance with group B requirements. d. Requirements f

47、or notification of change of product to acquiring activity, if applicable. e. Requirements for packaging and packing. 6.6 Replaceability. Filters covered by this drawing will replace the same commercial device covered by contractor-prepared specification or drawing. Provided by IHSNot for ResaleNo r

48、eproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER, DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 88051 REV G PAGE 7 6.7 Users of record. Coordination of this document for future revisions is coordinated only with the approved sources of supply and

49、the users of record of this document. Requests to be added as a recorded user of this drawing should be in writing to DSCC-VAT, Post Office Box 3990, Columbus, OH 43218-3990, by telephone to (614) 692-0562 or DSN 850-0562, or by email to capacitorfilterdla.mil. 6.8 Approved sources of supply. Approved sources of supply