DLA A-A-50592-1992 LAMP INCANDESCENT S-11 CANDELABRA SCREW《烛台螺丝S-11白炽灯》.pdf

《DLA A-A-50592-1992 LAMP INCANDESCENT S-11 CANDELABRA SCREW《烛台螺丝S-11白炽灯》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-50592-1992 LAMP INCANDESCENT S-11 CANDELABRA SCREW《烛台螺丝S-11白炽灯》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-50592 62 9999974 00b4023 7 A-A-50592 21 February 1992 COMMERCIAL ITEM DESCRIPTION LAMP, INCANDESCENT, S-11, CANDELABRA SCREW The General Services Administration has authorized the use of this commercial item description as a replacement for MS15575 which is canceled. Abstract. This commercial it

2、em description covers S-11 incandescent lamps with a candelabra screw base which are used for 35mm projectors. Salient characteristics. 1. Phvsical. Bulb designation s-11 Bulb finish Clear Base designation Candelabra screw Light center length 1-5/8 inches Filament type C-7A (distance from the center

3、 of the light source to the bottom base contact) Dimensions (See figure 1) FIGURE 1. Lamp dimensions (inches) Beneficial comments, recommendations, additions, deletions Ithis document should be sent by letter to: Commander Naval1 )Sea Systems Command, Attn: 5523, Washington, DC 20362-5101. I Iclarif

4、ications, etc. and any other data which may improve I I I FSC 6240 AMSC N/A DISTR1BUT:ON STATEMENT A. Approved for public release; distribution i: unlimited. 0 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - A-A-50592 62 9999974 0064024 9 A-A-5059

5、2 2. Lamp characteristics. CID Part number A50592 - 1 Volts 115- 125 Watts 10 Lumen output 78 Hours life (approx.) 1500 Contractor certification. ing evidence that the product offered meets the salient characteristics of this Commercial Item Description and that the product conforms to the producers

6、 own drawings, specifications, standards, and quality assurance practices. The govern- ment reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. The contractor shall certify and maintain

7、substantiat- Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practical. Preservation, packaginv. packing, labeling. and marking. Preservation, packaging, packing, labeling, and marking shall be as spe

8、cified in the contract or order. Notes. 1. Ordering data. Purchaser should specify the following: (a) Title, number, and date of this commercial item description. (b) CID part number required (see salient characteristics). 2. Cross reference to specification-based Dart numbers. CID part number MS-ba

9、sed part number MS15575-3 Type TS - 108 A50592 - 1 MILITARY INTERESTS: Custodians Army - ME Navy - SH Air Force - 99 Review activities Air Force - 82 DU - GS Preparing activity: Navy - SH (Proj ect 6240 - 1269) 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-