DIN 51622-1985 Liquefied petroleum gases propane propene butane butene and their mixtures requirements《液化石油气 丙烷、丙烯、丁烷、丁烯及其混合物 要求》.pdf

《DIN 51622-1985 Liquefied petroleum gases propane propene butane butene and their mixtures requirements《液化石油气 丙烷、丙烯、丁烷、丁烯及其混合物 要求》.pdf》由会员分享，可在线阅读，更多相关《DIN 51622-1985 Liquefied petroleum gases propane propene butane butene and their mixtures requirements《液化石油气 丙烷、丙烯、丁烷、丁烯及其混合物 要求》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、Liquefied petroleum gases Propane, propene, butane, butene and their Requirements mixtures Flssiggase; Propan, Propen, Butan, Buten und deren Gemische; Anforderungen DIN - 51 622 Supersedes November 1973 edition. In keeping with current practice in standards published by the International Organizati

2、on for Standardization (ISO), a comma has been used throughout as the decimal marker. 1 Scope and field of application This standard specifies liquefied petroleum gases as defined in clause 2. They are obtained from the produc- tion and processing of petroleum and natural gas, from the synthesis of

3、hydrocarbons and from petrochemical processes and are used, amongst other things, - as basic materials for further chemical processing; - as fuel gas for domestic, commercial and industrial - for the production of gases for the public gas supply; - as fuel for internal combustion engines. purposes;

4、2 Concept For the purposes of this standard, liquefied petroleum gases are the commercially available qualities of C3 and C4 hydrocarbons, propane, propene, butane and their mixtures. 3 Requirements 3.1 Composition The composition is to be determined in accordance with DIN 51 619. 3.1.1 Propane Comm

5、ercially available propane is a mixture of at least 95% by mass of propane and propene; the propane content shall predominate. The remainder may consist of ethane, ethene, butane and butene isomers. 3.1.2 Propene Commercially available propene is a mixture of at least 95 % by mass of propene and pro

6、pane; the propene content shall predominate. The remainder may consist of ethane, ethene, butane and butene isomers. 3.1.3 Butane Commercially available butane is a mixture of at least 95 % by mass of butane and butene isomers; the butane isomer content shall predominate. The remainder may consist o

7、f propane, propene, pentane and pentene isomers. 3.1.4 Butene Commercially available butene is a mixture of at least 95% by mass of butene and butane isomers; the butene isomer content shall predominate. The remainder may consist of propane, propene, pentane and pentene isomers. 3.1.5 Mixtures For t

8、he purposes of this standard, mixtures are those consisting of the liquefied petroleum gases defined in subclauses 3.1.1 to 3.1.4. Mixtures intended as fuel gas for domestic and com- mercial purposes shall not contain more than 60 % by mass of butane as defined in subclause 3.1.3 (residual propane a

9、s in subclause 3.1.1 1. 3.2 Vapour pressure The vapour pressure is to be calculated as specified in DIN 51 640. Table 1. Liquefied petroleum gas I Maximum vapour at 70 OC, in bar) As defined Type in subclause Propane 3.1.1 Propene 3.1.2 Butane 3.1.3 13 Butene 3.1.4 3.1.5 Mixture used as fuel gas I)

10、1 bar=0,1 MPa. 3.3 Odour For certain applications, e.g. as commercially available fuel gases for domestic, commercial and industrial pur- poses, liquefied petroleum gases shall have a perceptible odour.-The existing technical rules shall be observed (see also Explanatory notes under item e) ). Conti

11、nued on pages 2 to 4 Beuth Verlag GmbH, Berlin, has the exclusive right o sale tor German Standards (DIN-Normen). DIN 51 622 Engl. Price group 5 Sales No. O1 05 01.87 COPYRIGHT DIN DEUTSCHES Institut Fur Normung E.V.- EnglishLicensed by Information Handling ServicesPage 2 DIN 51 622 Requirements 3.4

12、 Degree of purity Testing as in Table 2. Degree of purity I rnglkg I DIN 51 855 Part 6 DIN 51 613 Not exceeding 5 I Hydrogen + nitrogen + oxygen + methane % by mass I Notexceeding0,2 I DIN51 619 I Volatile sulfur mglkg I Hydrogen sulfide (dihydrogensulfide) I Not detectable I DIN 51 855Part6) I Not

13、exceeding 50 EN 41 I Elementary sulfur mglkg I Notexceeding 1.5 I DIN51 613 I sulfide sulfur + elementary sulfur Residue on evaporation mglkg I Not exceeding 50 EN 52) I DIN 51 613and I I Ammonia, water, alkaline solution I Not detectable I DIN 51 614 I ) When using this standard, only proportions b

14、y mass of hydrogen sulfide (HIS) of not less than 1 mglkg can be determined. 2, A different requirement will be specified once a new method of test, which is being prepared, is finalized. Standards referred to DIN 51 613 DIN 51 614 DIN 51 619 DIN 51 640 DIN 51 855 Part 6 EN 5 EN 41 Testing of liquef

15、ied petroleum gases; determination of elementary sulfur and residue on evaporation Testing of liquefied petroleum gases; testing for ammonia, water and alkaline solution Testing of petroleum hydrocarbons; determination of the composition of liquefied petroleum gases; analysis by gas chromatography T

16、esting of liquefied petroleum gases; calculation of vapour pressure at 70% Testing of gaseous fuels and other commercial gases; determination of the content of sulfur compounds, hydrogen sulfide, mercaptan sulfur and carbonyl sufide sulfur; potentiometric method Determination of existent gum in fuel

17、s by jet evaporation Determination of sulfur content of petroleum products by the Wickbold combustion method COPYRIGHT DIN DEUTSCHES Institut Fur Normung E.V.- EnglishLicensed by Information Handling ServicesDIN 51 622 Page 3 Other relevant standards DIN 51 610 Testing of liquefied petroleum gases;

18、sampling Previous editions DIN 1875: 10.42. DIN 51 621: 03.56x, 01.66. DIN 51 622: 03.56, 01.66, 11.73. Amendments The following amendments have been made in comparison with the November 1973 edition: a) the text of the standard has been editorially revised; b) the specifications given in DIN 1310 a

19、nd the DIN 820 standard series have been taken into account. In addition, the references to other relevant standards have been brought up to date. Explanatory notes This standard has been prepared jointly by Technical Committee 631 Anforderungen an Flssiggase of Fachausschu Minerall- und Brennstoffn

20、ormung of the Normenausschu Materialprfung (Materials Testing Standards Committee) and the Normenausschu Gastechnik (Gas Technology Standards Cornmittee) of DIN. All the relevant safety regulations shall be taken into account for handling liquefied petroleum gases, in particular: a) Verordnung ber D

21、ruckbehlter, Druckgasbehlter und Fllanlagen Regulation on pressure vessels, compressed gas b) Richtlinien des Hauptverbandes der gewerblichen Berufsgenossenschaften, Zentralstelle fr Un fallverhtung und vessels and filling plants), dated 27 February 1980, Bundesgesetzblatt (Federal Gazette) (1980).

22、Part I, No. 8, p. 173; Arbeitsmedizin (Code of practice of the Federation of industrial employers liability insurance associations. Central Office for accident prevention and occupational medicine), such as - Richtlinien fr die Verwendung von Flssiggas (Code of practice for the use of liquefied petr

23、oleum gas) and - Richtlinien fur Laboratorien (Code of practice for laboratories) available from Carl Heymanns Verlag KG, Gereonstrae 18-32, D-5000 Kln 1; c) Unfallverhtungsvorhrift Arbeiten an Gasleitungen (Accident prevention regulation “Work on gas pipelines”) (VBG 50), April 1983 edition, availa

24、ble from Carl Heymanns Verlag KG, Gereonstrae 18-32, D-5000 Kln 1; d) Technische Regeln Flssiggas (Technical rules on liquefied petroleum gas) (TRF 691, October 1982 edition, available from ZfGW Verlag GmbH, Voltastrae 79, D-6000 Frankfurt am Main 90; e) DVGW G 280, Gasodorierung (Gas odourizing) (J

25、uly 1980 edition), available from Deutscher Verein des Gas- und Wasserfaches e. K, Frankfurter Allee 27, D-6236 Eschborn 1; f) International transport regulations, such as - Rdglementpour le transport de matires dangereuses sur le Rhin (Regulation for the transport of dangerous goods on the Rhine);

26、- Accord europen relatif au transport international de marchandises dangereuses par route (European agreement on the transport of dangerous goods by road); - Verordnung ber die Befrderung gefhrlicher Gter auf der Strae (Regulation on the transport of dangerous goods by road), dated 29 June 1983, Bun

27、desgesetzblatt (1983) Part I, No. 30, pp. 905-916; - Verordnung ber die Befrderung gefhrlicher Gter mit der Eisenbahn (Regulation on the transport of dangerous goods by rail), dated 22 June 1983, Bundesgesetzblatt (1983) Part I, No. 28, pp. 827-831; - Rglement international concernant le transport d

28、es marchandises par chemins de fer (International regulation on the transport of goods by rail); - Verordnung ber die Befrderung gefhrlicher Gter mit Seeschiffen ( Regulation on the transport of dangerous goods by sea), July 1982 edition, Bundesgesetzht (1982) Part I, No. 30, p. 11 13; - Technical i

29、nstructions for the safe transport of dangerous goods by air; published by the International Civil Aviation Organization (ICAO); available from: INTEREG; P.O. Box 60105, Chicago, Illinois 60660, USA; - International Maritime Dangerous Goods Code (IMDG-Code); available from International Maritime Org

30、anization (IMO), London or K. O. Storck und Co., Stahltwiete 7, D-2000 Hamburg 50. COPYRIGHT DIN DEUTSCHES Institut Fur Normung E.V.- EnglishLicensed by Information Handling ServicesPage 4 DIN 51 622 3.1.5 Liquefied petroleum gases as defined in this standard shall be designated as follows in accord

31、ance with the transport regulations specified under “Explanatory notes“: I I I I Table 3. Designation to be used As defined in in Germany Propane Propene Butane Butene Mixtures Propane mixture 3.1.1 3.1.2 3.1.3 I - I- Butene mixture 3.1.4 t Designation to be used Filling factor in other vapour press

32、ure density at European at 7OoC, in bar 5OoC, in kg/l countries M kgll - 31 0,447 0,425 Mixture C 31 0,442 0,42 0.49 Mixture A I 11 I 0,526 1 0.50 I Mixture Ao 0,495 0,537 Mixture Ao 16 0,495 0,47 I Mixture A, I 21 I 0,484 I 0,46 I I MixtureB I 26 I 0,453 I 0.43 I 1) Filling factor: 0.95 = minimum density at 50C. I International Patent Classification CO7 C 9/08 CO7 C 9/10 CO7 CI1106 CO7 C11/08 F17C CIOG 1/00 C 10 G 5/06 CIO L 1/04 CIO L 3/00 CIO LIO/OO COPYRIGHT DIN DEUTSCHES Institut Fur Normung E.V.- EnglishLicensed by Information Handling Services