CLC TR 50469-2005 Lightning protection systems C Symbols《雷电保护系统 符号》.pdf

《CLC TR 50469-2005 Lightning protection systems C Symbols《雷电保护系统 符号》.pdf》由会员分享，可在线阅读，更多相关《CLC TR 50469-2005 Lightning protection systems C Symbols《雷电保护系统 符号》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、PUBLISHED DOCUMENTPD CLC/TR 50469:2005Lightning protection systems SymbolsICS 01.080.50; 91.120.40g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58PD

2、 CLC/TR 50469:2005This Published Document was published under the authority of the Standards Policy and Strategy Committee on 24 January 2006 BSI 24 January 2006ISBN 0 580 47518 2National forewordThis Published Document is the official English language version of CLC/TR 50469:2005.The UK participati

3、on in its preparation was entrusted to Technical Committee GEL/81, Lightning protection, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European

4、publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the

5、 necessary provisions of a contract. Users are responsible for its correct application. Compliance with a Published Document does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on t

6、he interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the CLC/TR title page, pages 2 to 6, an inside back cover an

7、d a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsTECHNICAL REPORT CLC/TR 50469 RAPPORT TECHNIQUE TECHNISCHER BERICHT November 2005 CENELEC European Committee for Electrotechnical St

8、andardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. CLC/TR 504

9、69:2005 E ICS 01.080.50; 91.120.40 English version Lightning protection systems Symbols Systmes de protection contre la foudre Symboles Blitzschutzsysteme Bildzeichen This Technical Report was approved by CENELEC on 2005-10-01. CENELEC members are the national electrotechnical committees of Austria,

10、 Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 2 Foreword This Technical Report was

11、 prepared by the Technical Committee CENELEC TC 81X, Lightning protection. The text of the draft was submitted to the vote and was approved by CENELEC as CLC/TR 50469 on 2005-10-01. _ CLC/TR 50469:2005 3 Introduction This Technical Report specifies symbols for use in drawings for lightning protectio

12、n systems If necessary, additional symbols may be used for other important elements of the object to be protected. These symbols should be simple and they have to be explained in a legend in the LPS design drawings. In case of an isolated protection system (see IEC 62305-1 and IEC 62305-3) this has

13、to be stated in the LPS design drawings including required separation distances. In case of preparing a coloured kind of drawing, the colours should be used as follows: building black, lightning protection red, metal sheets green, metal structure blue. CLC/TR 50469:20054 1 Structure components No. S

14、ymbol Description Remarks 1 2 3 1.1 Contour of structure 1.2 + 8+ 5+ 3+ 5Roof heights The number with sign states the height in metres above ground level. 1.3 tileRoof covering, non metallic 1.4 galvanized steelRoof covering, metallic In the area displayed the type of roof covering should be specifi

15、ed (e.g. tile, shingle, double roof covering, galvanized steel). The thickness of metal covering has to be stated if it is too small to be used for air termination. 1.5 1,5 Chimney, non metallic 1.6 3 4 Chimney, metallic 1.7 3 Pipe, pole, ventilation duct, metallic 1.8 0,5 Pipe, pole, ventilation du

16、ct, non metallic 1.9 Roof stand for electric power supply The shape of the symbols (e.g. round, square) can be selected according to the actual construction. The number besides the symbol states the height above the roof in metres (e.g. 1,5 m). The largest (valley side) height has to be stated in ca

17、se of a pitched roof. 1.10 Antenna 1.11 Plate shaped outside, metallic 1.12 5Plate shaped inside, metallic The number inside the triangle states the shortest distance to the roof surface in meter (e.g. 5 m). CLC/TR 50469:2005 5 No. Symbol Description Remarks 1 2 3 1.13 Gutter, drain pipe, covering r

18、oof parapet, edge a.s.o., metallic One line of this symbol is possibly congruence with a line of the shown building contour. 1.14 GGexposed 1.15 GGPipe work, metallic hidden The letter points either to the function or to the medium flowing through e.g. G gas, W water, H heating. 1.16 Steel construct

19、ion elements 1.17 Reinforced concrete structures 1.18 Reinforced concrete structures with bonding connection 1.19 Prefabricated concrete parts 1.20 LIFTLift, elevator 1.21 Insulating part 1.22 Meter The letter in the symbol specifies the function e.g. G gas, W water, E electrical energy 1.23 Flammab

20、le zone 1.24 Explosive zone 1.25 Radioactive zone Statement for building areas defining the zones. F Ex CLC/TR 50469:20056 2 Parts of the lightning protection system No. Symbol Description Remarks 1 2 3 2.1 Air termination rod or stud Optional character indicates size and material. 2.2 Horizontal co

21、nductor (exposed) 2.3 Horizontal earth conductor 2.4 Horizontal conductor (hidden without earth contact) 2.5 Foundation earth electrode Line thickness about 2 to 3 times the line thickness of the building. Optional character indicates size and material. 2.6 Earth electrode (general) Optional charact

22、er indicates size, type and material of electrode. 2.7 Earth electrode with accessible connection Optional character indicates size and type of electrode and enclosure. 2.8 Vertical earth electrode Optional character indicates size and material of electrode. 2.9 AAAConductor connection or terminatio

23、n Optional character indicates type of connection or termination e.g. clamped, bolted, welded, etc. 2.10 Test joint 2.11 Conductor leading upwards Conductor leading downwards Conductor leading up- and downwards 2.12 Bonding conductor Conductor type to be specified. 2.13 Flexible bonding conductor 2.

24、14 Earth bar or equipotential bonding bar 2.15 Isolating spark gap For special spark gap additional marking necessary, for example with symbol “Ex”. 2.16 SPD SPDSurge protection device Optional character could indicate size and type of the protection device. CLC/TR 50469:2005 blankPD CLC/TR 50469:20

25、05BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are

26、updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this Brit

27、ish Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically

28、receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/ww

29、w.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international stan

30、dards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing m

31、embers of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regardi

32、ng online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internati

33、onal standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This doe

34、s not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.