CSA C22 2 NO 211 1-2006 Rigid types EB1 and DB2 ES2 PVC conduit (Third Edition Update No 1 December 2012).pdf

《CSA C22 2 NO 211 1-2006 Rigid types EB1 and DB2 ES2 PVC conduit (Third Edition Update No 1 December 2012).pdf》由会员分享，可在线阅读，更多相关《CSA C22 2 NO 211 1-2006 Rigid types EB1 and DB2 ES2 PVC conduit (Third Edition Update No 1 December 2012).pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、UPDATED DECEMBER 2012C22.2 No. 211.1-06(reaffirmed 2011)Rigid types EB1 and DB2/ES2 PVC conduitLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This pr

2、ocess brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of s

3、tandards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merch

4、antability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any

5、 applicable statute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING B

6、UT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION

7、OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perf

8、orm any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or r

9、eliance on the information contained in this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.Intell

10、ectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the

11、contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate

12、laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this

13、 document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the v

14、alidity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form: l

15、oad this document onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and o

16、nly if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If yo

17、u do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the t

18、erms and conditions of this Legal Notice.Revision HistoryC22.2 No. 211.1-06 Rigid types EB1 and DB2/ES2 PVC conduitRevision Issued: Update No. 1December 2012 Revision symbol (in margin)Table 4Figure 3Standards Update ServiceC22.2 No. 211.1-06October 2006Title: Rigid types EB1 and DB2/ES2 PVC conduit

19、To register for e-mail notification about any updates to this publicationa) go to shop.csa.cab) click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2019360.If you require assistance, please e-mail techsupportcsagroup.org or call 4167472233.Visit C

20、SA Groups policy on privacy at csagroup.org/legalto find out how we protect your personal information.ISBN 1554362423 2006 CSA GroupAll rights reserved. No part of this publication may be reproduced to any form whatsoever without the prior permission of the publisher.Published in October 2006 by CSA

21、 Group A not-for-profit private sector organization 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6 To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Asso

22、ciation, operating as “CSA Group”Rigid types EB1 and DB2/ES2 PVC conduitC22.2 No. 211.1-06C22.2 No. 211.1-06Rigid types EB1 and DB2/ES2 PVC conduitOctober 2006 2006 CSA Group 1ContentsTechnical Committee on Wiring Products 3Subcommittee on Nonmetallic Conduit, Tubing, and Fittings 4Preface 61 Scope

23、72 Reference publications 73 General requirements 83.1 Compounds 83.1.1 Virgin compound 83.1.2 Rework material 83.1.3 PVC industrial scrap 83.2 Conduit and fittings 93.2.1 General 93.2.2 Roughness (surface finish) 93.2.3 Bore 94 Construction 104.1 Conduit 104.1.1 Diameter and wall thickness 104.1.2

24、Out-of-roundness tolerance 104.1.3 Straightness 104.1.4 Sleeve stock and split conduit 104.1.5 Corrugated conduit 104.1.6 Bond strength of multi-layer conduit 104.2 Accessories 114.2.1 Push fit couplings 114.2.2 Solvent cement accessories 114.2.3 Sweep bends 115 Markings 125.1 Conduit 125.2 Fittings

25、 126 Tests 126.1 Conditioning 126.2 Impact resistance 136.3 Crush resistance 136.4 Coupling crush 136.5 Residual stress test 136.6 Chemical resistance 136.7 Joint tightness 136.8 Stiffness 136.9 Bond strength 13C22.2 No. 211.1-06Rigid types EB1 and DB2/ES2 PVC conduitOctober 2006 2006 CSA Group 2Ann

26、ex A (informative) Coupling and decoupling test for the design of push fit couplings 18C22.2 No. 211.1-06Rigid types EB1 and DB2/ES2 PVC conduitOctober 2006 2006 CSA Group 3Technical Committee on Wiring ProductsR. Leduc Alberta Municipal Affairs, ChairEdmonton, AlbertaRepresenting Regulatory Authori

27、tiesK.L. Rodel Hubbell Canada LP, Vice-ChairPickering, OntarioRepresenting ManufacturersB. Haydon CSA, Project ManagerMississauga, OntarioRepresenting Regulatory AuthoritiesG. Montminy Rgie du btiment du Qubec,Qubec, QubecT. Olechna Electrical Safety Authority,Mississauga, OntarioS. Paulsen Province

28、 of New Brunswick,Fredericton, New BrunswickA. Tsisserev City of Vancouver,Vancouver, British ColumbiaRepresenting ManufacturersP. Desilets Leviton Manufacturing of Canada Limited,Pointe-Claire, QubecM. Hopkins NOMA-Cable Tech,Stouffville, OntarioD.S. Reith Nexans Canada Inc.,Markham, OntarioReprese

29、nting General InterestsB. Beland Sherbrooke, QubecD.H. Dunsire Winnipeg, ManitobaConsumer RepresentativeC. Samuels ConocoPhillips Canada Ltd.,Calgary, AlbertaT. Simmons British Columbia Institute of Technology,Burnaby, British ColumbiaC22.2 No. 211.1-06Rigid types EB1 and DB2/ES2 PVC conduitOctober

30、2006 2006 CSA Group 4Subcommittee on Nonmetallic Conduit, Tubing, and FittingsP. Cook IPEX Inc., ChairVerdun, QubecB. Arsenault FRE Composites (2005) Inc.,Saint-Andr-dArgenteuil, QubecJ. Austin Kopex International Ltd.,Coleshill, EnglandG. Burnett IPEX Inc., AssociateVerdun, QubecD. Coolidge Electri

31、-Flex Company,Roselle, Illinois, USAG. Dauberger Thomas b) requirements for use of PVC industrial scrap; andc) requirements for multi-layer conduit.For general information on the Standards of the Canadian Electrical Code, Part II, see the Preface of CAN/CSA-C22.2 No. 0.This Standard is considered su

32、itable for use for conformity assessment within the stated scope of the Standard.This Standard was prepared by the Subcommittee on Nonmetallic Conduit, Tubing, and Fittings, under the jurisdiction of the Technical Committee on Wiring Products and the Strategic Steering Committee on Requirements for

33、Electrical Safety, and has been formally approved by the Technical Committee.Interpretations: The Strategic Steering Committee on Requirements for Electrical Safety has provided the following direction for the interpretation of standards under its jurisdiction: “The literal text shall be used in jud

34、ging compliance of products with the safety requirements of this Standard. When the literal text cannot be applied to the product, such as for new materials or construction, and when a relevant committee interpretation has not already been published, CSAs procedures for interpretation shall be follo

35、wed to determine the intended safety principle.”Notes:1) Use of the singular does not exclude the plural (and vice versa) when the sense allows.2) Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the user

36、s of the Standard to judge its suitability for their particular purpose.3) This publication was developed by consensus, which is defined by CSA Policy governing standardization Code of good practice for standardization as “substantial agreement. Consensus implies much more than a simple majority, bu

37、t not necessarily unanimity”. It is consistent with this definition that a member may be included in the Technical Committee list and yet not be in full agreement with all clauses of this publication.4) CSA Standards are subject to periodic review, and suggestions for their improvement will be refer

38、red to the appropriate committee.5) All enquiries regarding this Standard, including requests for interpretation, should be addressed to Canadian Standards Association, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6.Requests for interpretation shoulda) define the problem, making

39、reference to the specific clause, and, where appropriate, include an illustrative sketch;b) provide an explanation of circumstances surrounding the actual field condition; andc) be phrased where possible to permit a specific “yes” or “no” answer.d) Committee interpretations are processed in accordan

40、ce with the CSA Directives and guidelines governing standardization and are published in CSAs periodical Info Update, which is available on the CSA Web site at www.csa.ca.C22.2 No. 211.1-06Rigid types EB1 and DB2/ES2 PVC conduitOctober 2006 2006 CSA Group 7C22.2 No. 211.1-06Rigid types EB1 and DB2/E

41、S2 PVC conduit1 Scope1.1 This Standard applies to rigid PVC conduit type EB1 for encasement in concrete or masonry and type DB2/ES2 for direct burial or encasement in concrete or masonry and associated fittings in accordance with the Rules of the Canadian Electrical Code, Part I, for ordinary locati

42、ons.1.2 The conduits and associated fittings covered by this Standard are intended for a maximum continuous operating temperature of 75 C.1.3 The accessories covered by this Standard include straight couplings, 5 angle couplings, caps, plugs, bell end terminators, bends, and adapters.1.4 In CSA Stan

43、dards, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; “may” is used to express an option or that which is permissible within

44、the limits of the standard; and “can” is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and fi

45、gures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.2 Reference publicationsThis Standard refers to the following publications, and where such reference is made, i

46、t shall be to the edition listed below, including all revisions published thereto.CSA (Canadian Standards Association)B137.0-05 (part of B137 Series-05, Thermoplastic pressure piping compendium)Definitions, general requirements, and methods of testing for thermoplastic pressure pipingC22.1-06Canadia

47、n Electrical Code, Part ICAN/CSA-C22.2 No. 0-M91 (R2006)General requirements Canadian Electrical Code, Part IIC22.2 No. 211.0-03General requirements and methods of testing for nonmetallic conduitC22.2 No. 211.1-06Rigid types EB1 and DB2/ES2 PVC conduitOctober 2006 2006 CSA Group 8ASTM International

48、(American Society for Testing and Materials)D 618-05Standard Practice for Conditioning Plastics for TestingD 1784-03Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) CompoundsD 2122-98 (2004)Standard Test Method for Determining Dimensio

49、ns of Thermoplastic Pipe and FittingsD 2152-95 (2003)Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone ImmersionD 2412-02Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel- Plate LoadingD 2564-04e1Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping SystemsD 5033-00Standard Guide for Development of ASTM Standards Relating to Recycling and Use of Recycled Plastics3 General requireme