CEN TR 15118-2005 Testing guidelines for touch and close fasteners《粘合拉锁的试验指南》.pdf

《CEN TR 15118-2005 Testing guidelines for touch and close fasteners《粘合拉锁的试验指南》.pdf》由会员分享，可在线阅读，更多相关《CEN TR 15118-2005 Testing guidelines for touch and close fasteners《粘合拉锁的试验指南》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、PUBLISHED DOCUMENTPD CEN/TR 15118:2005Testing guidelines for touch and close fastenersICS 61.040g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58PD C

2、EN/TR 15118:2005This Published Document was published under the authority of the Standards Policy and Strategy Committee on 23 January 2006 BSI 23 January 2006ISBN 0 580 47128 4National forewordThis Published Document is the official English language version of CEN/TR 15118:2005.The UK participation

3、 in its preparation was entrusted to Technical Committee TCI/66, Apparel and indoor textiles, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or Euro

4、pean publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include al

5、l the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a Published Document does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries

6、 on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the CEN/TR title page, pages 2 to 8, an inside back cov

7、er and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsTECHNICAL REPORTRAPPORT TECHNIQUETECHNISCHER BERICHTCEN/TR 15118May 2005ICS 61.040English versionTesting guidelines for touch a

8、nd close fastenersLignes directrices pour lessai des fermetures auto-agrippantesTextilien - Haftverschlsse - AnforderungenThis Technical Report was approved by CEN on 7 April 2005. It has been drawn up by the Technical Committee CEN/TC 248.CEN members are the national standards bodies of Austria, Be

9、lgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMI

10、T EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. CEN/TR 15118:2005: E2 Contents Page Foreword 3 Introduction4 1 Scope .5

11、2 General 5 Bibliography.8 CEN/TR 15118:20053 Foreword This document (CEN/TR 15118:2005) has been prepared by Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI. Attention is drawn to the possibility that some of the elements of this document may

12、be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Report: Austria, Belgium, Cyprus,

13、Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. CEN/TR 15118:20054 Introduction A large and growin

14、g variety of touch and close fasteners exist on the market. They differ by the nature of their raw materials, their construction, the type of gripping elements and in their performance, e.g. shear strength, peel, cycling and cleaning. To ensure that a touch and close fastener of a particular type is

15、 suitable for the consumers end product, the guidelines recommend that different procedures are followed to ensure that the chosen type of attachment is appropriate. CEN/TR 15118:20055 1 Scope This Technical Report describes different methods of integration of touch and close fasteners to the final

16、or finished product, such as: Sewing, mechanical attachment, adhesive pressure sensitive, heat activated, welded attachment, moulding in, straps, non-continous application in various widths, together with the appropriate test method. 2 General Table 1 is divided into four sections: A: characteristic

17、s of construction B: characteristics of mechanical resistance and usage C: characteristics of colour fastness D: particular behaviour Each section lists the relevant methods and recommends the appropriate methods for each particular use. CEN/TR 15118:20056 Table 1 Testing guidelines for touch and cl

18、ose fasteners Characteristic Sewing Mechanical attachment Adhesive pressure sensitive Heat activated Welded attachment Moulding in Straps Non-continous products applied in various ways A Characteristics of construction 1 Identification of materials YES YES YES YES YES YES YES YES 2 Dimensions 2.1 Ov

19、erall width: EN 12240 YES YES YES YES YES YES YES NO 2.2 Effective width: EN 12240 YES YES YES YES YES YES YES NO 3 Type of edges: woven, knitted or slit YES YES NO YES NO NO YES NO B Characteristics of mechanical resistance and usage 1 Longitudinal shear strength: EN 13780 1.1 Original YES YES YES

20、YES YES YES YES NO 1.2 After cycling YES YES YES YES YES YES YES NO 2 Peel strength: EN 12242 2.1 Original YES YES YES YES YES YES YES NO 2.2 After cycling YES YES YES YES YES YES YES NO CEN/TR 15118:20057 3 Breaking strength and elongation at break: EN 13934-1 NO NO NO NO NO NO YES NO 4 Behaviour o

21、f male and female tapes to washing and dry cleaning or dry cleaning 4.1 Longitudinal shear strength YES NO YES YES YES NO YES NO 4.2 Peel strength YES NO YES YES YES NO YES NO 4.3 Resistance to fraying YES YES NO YES NO NO YES NO 4.4 Resistance of slit selvedges after washing and drying: EN 1415 YES

22、 YES NO YES NO NO YES NO 5 Dimensional stability: EN 12243 5.1 to washing and drying YES NO NO YES YES NO YES NO 5.2 to dry cleaning YES NO NO YES YES NO YES NO 6 Curvature: EN 1416 YES YES YES YES YES YES YES NO C Characteristics of colour fastness 1 Colour fastness to light: ISO 105-B02 YES YES YE

23、S YES YES YES YES NO 2 Colour fastness to washing: EN ISO 105-C06 YES NO NO YES YES NO YES NO 3 Colour fastness to dry cleaning: EN ISO 105-D01 YES NO NO YES YES NO YES NO D Particular behaviour 1 Burning behaviour Customer requirement or tests, e.g. AECMA, prEN 2310 or FAR 23853B , ISO 3795 etc CEN

24、/TR 15118:20058 Bibliography EN 1415 Touch and close fasteners - Behaviour of slit selvedges EN 1416 Touch and close fasteners - Determination of curvature EN 12240 Touch and close fasteners - Determination of the overall and effective widths of tapes and the effective width of a closure EN 12242 To

25、uch and close fasteners - Determination of peel strength EN 12243 Touch and close fasteners - Determination of dimensional change in washing and drying and dry cleaning EN 13780 Touch and close fasteners - Determination of longitudinal shear strength EN ISO 13934-1 Textiles - Tensile properties of f

26、abrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:1999) EN ISO 105-B02 Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:1994) EN ISO 105-C06 Textiles - Tests

27、 for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:1994) EN ISO 105-D01 Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning (ISO 105-D01:1993) ISO 3795, Road vehicles, and tractors and machinery for agriculture and forestr

28、y - Determination of burning behaviour of interior materials AECMA, prEN 2310 Aerospace series - Test methods for the flame resistance rating of non-metallic materials FAR 23853B CEN/TR 15118:2005blankPD CEN/TR 15118:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is th

29、e independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure tha

30、t they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, t

31、he identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, inte

32、rnational and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to sup

33、ply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BS

34、I electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substan

35、tial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found a

36、t http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and

37、 Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of neces

38、sary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.