CAN CSA-ISO IEC 7816-2-2008 Identification cards - Integrated circuit cards - Part 2 Cards with contacts - Dimensions and location of the contacts.pdf

《CAN CSA-ISO IEC 7816-2-2008 Identification cards - Integrated circuit cards - Part 2 Cards with contacts - Dimensions and location of the contacts.pdf》由会员分享，可在线阅读，更多相关《CAN CSA-ISO IEC 7816-2-2008 Identification cards - Integrated circuit cards - Part 2 Cards with contacts - Dimensions and location of the contacts.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、 Reference numberISO/IEC 7816-2:2007(E)ISO/IEC 2007 International Organization for Standardization (ISO), 2007. All rights reserved. International Electrotechnical Commission (IEC), 2007. All rights reserved. NOT FOR RESALE. National Standard of CanadaCAN/CSA-ISO/IEC 7816-2:08(ISO/IEC 7816-2:2007)In

2、ternational Standard ISO/IEC 7816-2:2007 (second edition, 2007-10-15) has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-ISO/IEC 7816-2:08, which has been approved as a NationalStandard of Canada by the Standards Council of Canada.ISBN 978-1-55436-807-5 September 2008Identification c

3、ards Integrated circuit cards Part 2: Cards with contacts Dimensions and location of the contacts Cartes didentification Cartes circuit intgr Partie 2: Cartes contacts Dimensions et emplacements des contactsLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed throug

4、h a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in

5、 achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties

6、or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes

7、 no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL

8、 DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEOR

9、Y OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other

10、 services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility wha

11、tsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the stan

12、dards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (

13、except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclos

14、ure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property

15、 rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination

16、 of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form

17、:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and onl

18、y if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not

19、 agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and

20、 conditions of this Legal Notice.The Canadian Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary

21、membership association engaged in standards development and certification activities. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by in

22、dustry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards

23、 development by volunteering their time and skills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sus

24、taining memberships represent a major source of income for CSAs standards development activities. The Association offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association

25、 regularly and continually audits and inspects products that bear the CSA Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has dev

26、eloped the necessary expertise to meet its corporate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet nat

27、ional and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada (SCC) is thecoordinating body of the National StandardsSystem, a coalition of independent, auton

28、omousorganizations working towards the furtherdevelopment and improvement of voluntarystandardization in the national interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof advancing the national economy, benefiting thehealth, safety, and welfare of

29、 the public, assistingand protecting the consumer, facilitating domesticand international trade, and furthering internationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or reviewed by an accredited Standards Development Organization (SDO) and appro

30、ved by the SCC according to the requirements of CAN-P-2. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practic

31、able extent, a balance of representation of general interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the natio

32、nal interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO which publishes the standard.The responsibility for approving standards as National Standards of Canada

33、 rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular

34、purpose.Registered trade-mark of Canadian Standards AssociationCette norme est offerte en anglais seulement pour le moment. La CSA publiera la version enfranais ds quelle sera produite par lorganisme rdacteur.Approved byStandards Council of CanadaNational Standard of CanadaPublished in September 200

35、8 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caCAN/CSA-ISO/IEC 7816-2:08Identification cards Integrated circuit cards Part 2: Cards wit

36、h contacts Dimensions and location of the contactsPrepared by International Organization for Standardization/ International Electrotechnical CommissionReviewed byCAN/CSA-ISO/IEC 7816-2:08Identification cards Integrated circuit cards Part 2: Cardswith contacts Dimensions and location of the contactsS

37、eptember 2008 Canadian Standards Association CSA/3CAN/CSA-ISO/IEC 7816-2:08Identification cards Integrated circuit cards Part 2: Cards with contacts Dimensions and location of the contactsCSA PrefaceStandards development within the Information Technology sector is harmonized with international stand

38、ards development. Through the CSA Technical Committee on Information Technology (TCIT), Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO member body for Canada a

39、nd sponsor of the Canadian National Committee of the IEC. Also, as a member of the International Telecommunication Union (ITU), Canada participates in the International Telegraph and Telephone Consultative Committee (ITU-T).At the time of publication, ISO/IEC 7816-2:2007 is available from ISO and IE

40、C in English only. CSA will publish the French version when it becomes available from ISO and IEC.This International Standard was reviewed by the CSA TCIT under the jurisdiction of the Strategic Steering Committee on Information Technology and deemed acceptable for use in Canada. From time to time,

41、ISO/IEC may publish addenda, corrigenda, etc. The CSA TCIT will review these documents for approval and publication. For a listing, refer to the CSA Information Products catalogue or CSA Info Update or contact a CSA Sales representative. This Standard has been formally approved, without modification

42、, by the Technical Committee and has been approved as a National Standard of Canada by the Standards Council of Canada.September 2008 Canadian Standards Association 2008All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publi

43、sher. ISO/IEC material is reprinted with permission. Where the words “this International Standard” appear in the text, they should be interpreted as “this National Standard of Canada”.Inquiries regarding this National Standard of Canada should be addressed toCanadian Standards Association5060 Spectr

44、um Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000www.csa.caTo purchase CSA Standards and related publications, visit CSAs Online Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.Reference numberISO/IEC 7816-2:2007(E)ISO/IEC 2007INTERNATIONAL S

45、TANDARD ISO/IEC7816-2Second edition2007-10-15Identification cards Integrated circuit cards Part 2: Cards with contacts Dimensions and location of the contacts Cartes didentification Cartes circuit intgr Partie 2: Cartes contacts Dimensions et emplacements des contacts ISO/IEC 7816-2:2007(E) PDF disc

46、laimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties

47、accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to t

48、he file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROT

49、ECTED DOCUMENT ISO/IEC 2007 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 200