CAN CSA-ISO IEC 14443-4C-2015 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 4 Transmission protocol AMENDMENT 3 Bit rates of 3fc 4 fc 3fc 2 a.pdf

《CAN CSA-ISO IEC 14443-4C-2015 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 4 Transmission protocol AMENDMENT 3 Bit rates of 3fc 4 fc 3fc 2 a.pdf》由会员分享，可在线阅读，更多相关《CAN CSA-ISO IEC 14443-4C-2015 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 4 Transmission protocol AMENDMENT 3 Bit rates of 3fc 4 fc 3fc 2 a.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、 ISO/IEC 2013. CSA Group 2015. All rights reserved. Unauthorized reproduction is strictly prohibited.Amendment 3:2015 (IDT) toCAN/CSA-ISO/IEC 14443-4:09(ISO/IEC 14443-4:2008, IDT)National Standard of CanadaAmendment 3:2015 (IDT) to CAN/CSA-ISO/IEC 14443-4:09Identification cards Contactless integrate

2、d circuit cards Proximity cards Part 4: Transmission protocolAMENDMENT 3: Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC(ISO/IEC 14443-4:2008, IDT)Standards Update ServiceAmendment 3:2015 (IDT) to IEC 14443-4:09January 2015Title: Identification cards Contactless integrated circuit cards Prox

3、imity cards Part 4: Transmission protocolAMENDMENT 3: Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICCTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publicatio

4、n is 2423445.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personalinformation.Reference numberISO/IEC 14443-4:2008/Amd.3:2013(E)ISO/IEC 2013INTERNATIONAL STANDARD ISO/IEC

5、14443-4Second edition2008-07-15AMENDMENT 32013-10-01Identification cards Contactless integrated circuit cards Proximity cards Part 4: Transmission protocol AMENDMENT 3: Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC Cartes didentification Cartes circuit(s) intgr(s) sans contact Cartes de pro

6、ximit Partie 4: Protocole de transmission AMENDEMENT 3: Dbits binaires de 3fc/4, fc, 3fc/2 et 2fc de PCD vers PICC ISO/IEC 14443-4:2008/Amd.3:2013(E) COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized o

7、therwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright off

8、ice Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 2013 All rights reservedAmendment 3:2015 (IDT) to CAN/CSA-ISO/IEC 14443-4:09ISO/IEC 14443-4:2008/Amd.3:2013(E) ISO/IEC 2013 All rights reserved iiiForeword ISO (the I

9、nternational Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees esta

10、blished by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In th

11、e field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards.

12、Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of t

13、his document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Amendment 3 to ISO/IEC 14443-4:2008 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 17, Cards and personal ident

14、ification. Amendment 3:2015 (IDT) to CAN/CSA-ISO/IEC 14443-4:09Amendment 3:2015 (IDT) to CAN/CSA-ISO/IEC 14443-4:09ISO/IEC 14443-4:2008/Amd.3:2013(E) ISO/IEC 2013 All rights reserved 1Identification cards Contactless integrated circuit cards Proximity cards Part 4: Transmission protocol AMENDMENT 3:

15、 Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC Clause 9 Add the following below Figure 24: “For bit rates of 3fc/4, fc, 3fc/2 and 2fc see Annex D.“ After Annex C Add the following Annex D: “ Amendment 3:2015 (IDT) to CAN/CSA-ISO/IEC 14443-4:09ISO/IEC 14443-4:2008/Amd.3:2013(E) 2 ISO/IEC 201

16、3 All rights reservedAnnex D (normative) Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC D.1 Function tags identifier definition The information field shall contain tags and values as defined in Table D.1. Table D.1 Function tags identifier definition Tag (Hex) Description Length (Hex) Value

17、A1 Bit rates Request 0 A2 Bit rates Indication L Tag (Hex) Length (Hex) Value 80 02 supported bit rates from PCD to PICC 1stbyte is specified in Figure 23 2ndbyte is specified in Figure D.1 81 02 supported bit rates from PICC to PCD 1stbyte is specified in Figure 23 2ndbyte is RFU 82 01 supported fr

18、aming options PICC to PCD (see Figure 24)aA3 Bit rates Activation L Tag (Hex) Length (Hex) Value 83 02 selected bit rate from PCD to PICCb1stbyte is specified in Figure 23 2ndbyte is specified in Figure D.1 84 02 selected bit rate from PICC to PCDb1stbyte is specified in Figure 23 2ndbyte is RFU 85

19、01 selected framing options PICC to PCD (see Figure 24)a,c A4 Bit rates Acknowledgement 0 a shall be omitted for Type A PICCsbThe PCD shall set only one bit. The PCD shall not activate simultaneously a bit rate higher than fc/16 for PCD to PICC communication and a bit rate of fc/128 for PICC to PCD

20、communication in Type A. cThe PCD shall not set both b1 (start bit and stop bit suppression) and b2 (SOF and EOF suppression). When the PCD sets b1 (start bit and stop bit suppression): The PICC shall use a SOF low time of 10 etu and a SOF high time of 2 etu. The PICC shall use an EOF low time of 10

21、 etu. The PICC shall apply no character separation.Amendment 3:2015 (IDT) to CAN/CSA-ISO/IEC 14443-4:09ISO/IEC 14443-4:2008/Amd.3:2013(E) ISO/IEC 2013 All rights reserved 33fc/4, if bit is set to (1)bfc, if bit is set to (1)b3fc/2, if bit is set to (1)b2fc, if bit is set to (1)bRFURFURFURFUb8 b7 b1b

22、2b3b4b5b60 000Figure D.1 Coding of bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC “ Amendment 3:2015 (IDT) to CAN/CSA-ISO/IEC 14443-4:09ISO/IEC 14443-4:2008/Amd.3:2013(E) ICS 35.240.15 ISO/IEC 2013 All rights reserved Copyright NoticeThe Canadian adopg415 on of this Amendment to the Internag

23、415 onal Standard contains informag415 on copyright protected by CSA Group. All rights reserved. No part of this adopted Amendment may be reproduced in any form whatsoever without the prior permission of CSA Group. ISO/IEC material is reprinted with permission.Requests for permission to reproduce this adopted Amendment or parts thereof should be addressed to:Manager, SalesCSA Group5060 Spectrum Way, Suite 100Mississauga, Ontario L4W 5N6Copyright violators will be prosecuted to the full extent of the law.