CAN CSA-ISO IEC 10021-5-2002 Information Technology - Message Handling Systems (MHS) Message Store Abstract Service Definition (Second Edition).pdf

《CAN CSA-ISO IEC 10021-5-2002 Information Technology - Message Handling Systems (MHS) Message Store Abstract Service Definition (Second Edition).pdf》由会员分享，可在线阅读，更多相关《CAN CSA-ISO IEC 10021-5-2002 Information Technology - Message Handling Systems (MHS) Message Store Abstract Service Definition (Second Edition).pdf（163页珍藏版）》请在麦多课文档分享上搜索。

1、 National Standard of CanadaCAN/CSA-ISO/IEC 10021-5:02(ISO/IEC 10021-5:1999)International Standard ISO/IEC 10021-5:1999 (fourth edition, 1999-12-15), has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-ISO/IEC 10021-5:02, which has been approved as a NationalStandard of Canada by the

2、Standards Council of Canada.ISBN 1-55324-703-5 March 2002Information technology MessageHandling Systems (MHS): Message store:Abstract service definitionTechnologies de linformation Systmes de messagerie (MHS): Mmoirede messages: Dfinition du service abstraitReference numberISO/IEC 10021-5:1999(E) IS

3、O/IEC 1999The Canadian Standards Association (CSA), The Standards Council of Canada is theunder whose auspices this National Standard has been coordinating body of the National Standards system, produced, was chartered in 1919 and accredited by a federation of independent, autonomousthe Standards Co

4、uncil of Canada to the National organizations working towards the furtherStandards system in 1973. It is a not-for-profit, development and improvement of voluntarynonstatutory, voluntary membership association standardization in the national interest.engaged in standards development and certificatio

5、n The principal objects of the Council are to foster activities. and promote voluntary standardization as a means CSA standards reflect a national consensus of of advancing the national economy, benefiting theproducers and users including manufacturers, health, safety, and welfare of the public, ass

6、isting consumers, retailers, unions and professional and protecting the consumer, facilitating domestic organizations, and governmental agencies. The and international trade, and furthering internationalstandards are used widely by industry and commerce cooperation in the field of standards.and ofte

7、n adopted by municipal, provincial, and A National Standard of Canada is a standard whichfederal governments in their regulations, particularly in has been approved by the Standards Council ofthe fields of health, safety, building and construction, Canada and one which reflects a reasonableand the e

8、nvironment. agreement among the views of a number of capableIndividuals, companies, and associations across individuals whose collective interests provide to theCanada indicate their support for CSAs standards greatest practicable extent a balance ofdevelopment by volunteering their time and skills

9、to representation of producers, users, consumers, andCSA Committee work and supporting the Associations others with relevant interests, as may be appropriateobjectives through sustaining memberships. The more to the subject in hand. It normally is a standardthan 7000 committee volunteers and the 200

10、0 which is capable of making a significant and timelysustaining memberships together form CSAs total contribution to the national interest.membership from which its Directors are chosen. Approval of a standard as a National Standard ofSustaining memberships represent a major source of Canada indicat

11、es that a standard conforms to theincome for CSAs standards development activities. criteria and procedures established by the StandardsThe Association offers certification and testing Council of Canada. Approval does not refer to theservices in support of and as an extension to its technical conten

12、t of the standard; this remains thestandards development activities. To ensure the continuing responsibility of the accreditedintegrity of its certification process, the Association standards-development organization.regularly and continually audits and inspects products Those who have a need to app

13、ly standards arethat bear the CSA Mark. encouraged to use National Standards of CanadaIn addition to its head office and laboratory complex whenever practicable. These standards are subject in Toronto, CSA has regional branch offices in major to periodic review; therefore, users are cautioned centre

14、s across Canada and inspection and testing to obtain the latest edition from the organizationagencies in eight countries. Since 1919, the preparing the standard.Association has developed the necessary expertise to The responsibility for approving National Standards meet its corporate mission: CSA is

15、 an independent of Canada rests with theservice organization whose mission is to provide an Standards Council of Canadaopen and effective forum for activities facilitating the 270 Albert Street, Suite 200exchange of goods and services through the use of Ottawa, Ontario, K1P 6N7standards, certificati

16、on and related services to meet Canadanational and international needs.For further information on CSA services, write toCanadian Standards Association178 Rexdale BoulevardToronto, Ontario, M9W 1R3CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is important

17、to note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationInformation technology Message Handling SystemsCAN/CSA-ISO/IEC 10021-5:02 (MHS): Message store: Abstract service definitionMarch 2002 C

18、anadian Standards Association CSA/1CAN/CSA-ISO/IEC 10021-5:02Information technology MessageHandling Systems (MHS): Messagestore: Abstract service definitionCSA PrefaceThis is the second edition of CSA Standard CAN/CSA-ISO/IEC 10021-5. It supersedes the previous editionpublished in 1994 (adoption of

19、ISO/IEC 10021-5:1990).Standards development within the Information Technology sector is harmonized with international standardsdevelopment. Through the CSA Technical Committee on Information Technology (TCIT), Canadians serve asthe Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committ

20、ee 1 on Information Technology(ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO member body for Canada and sponsor ofthe Canadian National Committee of the IEC. Also, as a member of the International TelecommunicationUnion (ITU), Canada participates in the International Telegraph and

21、 Telephone Consultative Committee(ITU-T).This International Standard was reviewed by the CSA TCIT under the jurisdiction of the Strategic SteeringCommittee on Information Technology and deemed acceptable for use in Canada. (A committee membershiplist is available on request from the CSA Project Mana

22、ger.) From time to time, ISO/IEC may publish addenda,corrigenda, etc. The CSA TCIT will review these documents for approval and publication. For a listing, refer tothe CSA Information Products catalogue or CSA Info Update or contact a CSA Sales representative. ThisStandard has been formally approved

23、, without modification, by these Committees and has been approved as aNational Standard of Canada by the Standards Council of Canada.March 2002 Canadian Standards Association 2002All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of

24、 thepublisher. ISO/IEC material is reprinted with permission. Where the words “this International Standard” appear in the text, theyshould be interpreted as “this National Standard of Canada”. Inquiries regarding this National Standard of Canada should be addressed to Canadian Standards Association

25、178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R31-800-463-6727 416-747-4044www.csa.caReference numberISO/IEC 10021-5:1999(E)ISO/IEC 1999INTERNATIONALSTANDARDISO/IEC10021-5Fourth edition1999-12-15Information technology MessageHandling Systems (MHS): Message store:Abstract service definitionTec

26、hnologies de linformation Systmes de messagerie (MHS): Mmoirede messages: Dfinition du service abstraitISO/IEC 10021-5:1999(E)PDF disclaimerThis PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall notbe edited unless the t

27、ypefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading thisfile, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in thisarea.Adobe is a trademark of Adobe S

28、ystems Incorporated.Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameterswere optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely

29、 eventthat a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 1999All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronicor mechanical, including photo

30、copying and microfilm, without permission in writing from either ISO at the address below or ISOs member bodyin the country of the requester.ISO copyright officeCase postale 56 Gb7 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.chWeb www.iso.chPublished by ISO in 200

31、0ii ISO/IEC 1999 All rights reservedISO/IEC 10021-5:1999(E) ISO/IEC 1999 All rights reserved iiiCONTENTS Page SECTION 1 GENERAL 1 1 Scope . 1 2 Normative references 1 2.1 Reference Model references. 2 2.2 Presentation references 2 2.3 Remote Operations references . 2 2.4 Directory references 2 2.5 M

32、essage Handling references 2 3 Definitions 2 3.1 Common Definitions for MHS. 2 3.2 Message Store Definitions. 3 4 Abbreviations. 6 5 Conventions . 6 5.1 Conventions for abstract-services. 6 5.2 Conventions for attribute-types used in Tables 2 and 3 of clause 11 7 5.3 Conventions for attribute-types

33、used in Table 4 of clause 11. 7 5.4 General font conventions. 7 5.5 Font conventions for ASN.1 definitions. 7 5.6 Rules for ASN.1 definitions. 8 5.7 Conventions for previous editions of this Service Definition 8 5.8 ASN.1 Packed Encoding Rules 8 5.9 Interpretation of UTC Time values 8 SECTION 2 MESS

34、AGE STORE ABSTRACT-SERVICE DEFINITION 8 6 Message Store model 8 6.1 Message Store objects and contracts 9 6.2 Message Store ports. 10 6.2.1 Retrieval Ports 10 6.2.2 MS-submission Ports 11 6.2.3 Administration Ports. 11 6.3 Information model. 11 6.3.1 Entry-classes 11 6.3.2 Entries 12 6.3.3 Attribute

35、s . 12 6.3.3.1 Attribute-type . 13 6.3.3.2 Attribute-values 13 6.3.3.3 The ATTRIBUTE information object class . 13 6.3.4 Main-entries, parent-entries, and child-entries . 14 6.3.5 Content-specific Attributes . 14 6.3.6 Entry-types. 15 6.3.7 Organization of entry-classes 15 6.3.7.1 The Stored-message

36、 entry-class 16 6.3.7.2 The Message-log entry-class. 16 6.3.7.3 The Auto-action-log entry-class 17 6.3.7.4 Entry-class support . 17 6.3.8 Retrieval-status. 17 ISO/IEC 10021-5:1999(E)iv ISO/IEC 1999 All rights reservedPage 6.3.9 Matching-rules . 18 6.3.9.1 Generic Matching Rules 18 6.3.9.2 Matching R

37、ule definition 19 6.3.9.3 The MATCHING-RULE information object class. 19 6.4 Message grouping . 19 6.5 Auto-actions 20 6.5.1 The AUTO-ACTION information object class 20 6.5.2 Auto-action registration 21 6.5.3 Auto-action errors. 21 6.5.4 Auto-action execution. 21 6.6 MS extensions. 22 7 MS-bind and

38、MS-unbind operations 22 7.1 MS-bind abstract-operation 22 7.1.1 MS-bind-argument 22 7.1.2 MS-bind-result . 24 7.1.3 MS-bind-error 26 7.2 MS-unbind abstract-operation 27 8 Abstract-operations. 27 8.1 Common data-types used in abstract-operations. 27 8.1.1 Range. 27 8.1.2 Filters. 28 8.1.2.1 Filter 28

39、 8.1.2.2 Filter-item 28 8.1.2.3 Attribute-value-assertion. 29 8.1.3 Selector 29 8.1.4 Entry-information-selection 30 8.1.5 Entry-information. 31 8.1.6 MS-submission-options 31 8.1.7 Common-submission-results. 33 8.2 Retrieval Port abstract-operations 33 8.2.1 Summarize abstract-operation. 34 8.2.1.1

40、 Summarize-argument 34 8.2.1.2 Summarize-result 34 8.2.1.3 Summarize abstract-errors 35 8.2.2 List abstract-operation 35 8.2.2.1 List-argument. 35 8.2.2.2 List-result. 36 8.2.2.3 List abstract-errors 36 8.2.3 Fetch abstract-operation 36 8.2.3.1 Fetch-argument. 36 8.2.3.2 Fetch-result 37 8.2.3.3 Fetc

41、h abstract-errors . 37 8.2.4 Delete abstract-operation 37 8.2.4.1 Delete-argument. 38 8.2.4.2 Delete-result. 38 8.2.4.3 Delete abstract-errors 38 8.2.5 Register-MS abstract-operation. 38 8.2.5.1 Register-MS-argument 39 8.2.5.2 Register-MS-result 43 8.2.5.3 Register-MS abstract-errors 43 8.2.6 Alert

42、abstract-operation 43 8.2.6.1 Alert-argument . 44 8.2.6.2 Alert-result. 44 8.2.6.3 Alert abstract-errors 44 8.2.7 Modify abstract-operation. 44 8.2.7.1 Modify-argument 44 8.2.7.2 Modify-result 46 8.2.7.3 Modify Abstract-errors . 46 ISO/IEC 10021-5:1999(E) ISO/IEC 1999 All rights reserved vPage 8.3 M

43、S-submission Port abstract-operations 46 8.3.1 MS-message-submission abstract-operation 46 8.3.1.1 MS-message-submission-argument. 47 8.3.1.2 MS-message-submission-result. 47 8.3.1.3 MS-message-submission Abstract-errors. 47 8.3.2 MS-probe-submission abstract-operation. 48 8.3.2.1 MS-probe-submissio

44、n-argument . 48 8.3.2.2 MS-probe-submission-result . 48 8.3.2.3 MS-probe-submission Abstract-errors. 48 8.3.3 MS-cancel-deferred-delivery abstract-operation 48 8.3.4 MS-submission-control abstract-operation 49 9 Abstract-errors 49 9.1 Error precedence . 49 9.2 Attribute-error. 49 9.3 Auto-action-req

45、uest-error 50 9.4 Delete-error. 50 9.5 Fetch-restriction-error 51 9.6 Invalid-parameters-error 51 9.7 Range-error. 52 9.8 Security-error 52 9.8.1 Security-error for Register-MS abstract-operation . 52 9.8.2 Security-error for Delete, Fetch, List, Modify and Summarize abstract-operations . 52 9.8.3 S

46、ecurity-error for MS-probe-submission and MS-message-submission abstract-operations 52 9.9 Sequence-number-error . 53 9.10 Service-error . 53 9.11 Message-group-error . 53 9.12 MS-extension-error . 54 9.13 Register-MS-error . 54 9.14 Old-credentials-incorrectly-specified . 55 9.15 New-credentials-un

47、acceptable . 55 9.16 Modify-error . 55 9.17 Entry-class-error 55 SECTION 3 GENERAL-ATTRIBUTE-TYPES, MATCHING-RULES AND AUTO-ACTION-TYPES. 56 10 Overview 56 11 General-attribute-types . 56 11.1 General-attribute-types overview. 56 11.1.1 MS support requirements for general-attribute-types . 59 11.1.2

48、 MS-user support requirements for general-attribute-types 59 11.2 Description of the general-attribute-types. 59 11.2.1 AC-correlated-report-list. 59 11.2.2 AC-report-subject-entry 60 11.2.3 AC-report-summary 60 11.2.4 AC-uncorrelated-report-list. 61 11.2.5 Auto-action-error 61 11.2.6 Auto-action-re

49、gistration-identifier. 62 11.2.7 Auto-action-subject-entry . 62 11.2.8 Auto-action-type. 62 11.2.9 Certificate-selectors 62 11.2.10 Child-sequence-numbers. 62 11.2.11 Content. 62 11.2.12 Content-confidentiality-algorithm-identifier 63 11.2.13 Content-correlator. 63 11.2.14 Content-identifier . 63 11.2.15 Content-integrity-check 63 11.2.16 Content-length 63 ISO/IEC 10021-5:1999(E)vi ISO/IEC 1999 All rights reservedPage 11.2.17 Content-returned. 64 11.2.18 Content-type. 64 11.2.19 Conversion-with-loss-prohibited. 64 11.2.20 Conv